I noticed you are closing in on 1 million! Just wanted to say, I know alot of youtubers get negative comments. I hope you guys completely disregard those. I am a long time fan and think that yall represent yourselves well just being........yourselves. It's nice to watch content completely devoid of the constant humdrum of doom and gloom. Cars and Cameras is a great escape. Thanks! Keep Trucking!
As far as a custom headlight bulb goes, I have successfully unsoldered the metal disc and soldered it onto a newer, more modern 12volt bulb. Easier then you’d think actually. Love the build, beautiful ride guys!
Wheel bearing...it happened to me one time while doing around 70km/h i felt some strange wiggle on rear wheel in my motoscooter called "Hulajstopa" but after stopping and checking if anything is alright i haven't noticed any problems so I continued the ride. After getting to home I felt again this wiggle and then noticed rear wheel moving from side to side so I dissasambled the axle and found out that my rear left bearing (on the sprocket side) wasn't existing any more, bunch of metal shavings where in hub and axle was almost cut in half because of ball bearings, so if the axle snapped while doing 70km/h, I would end worse than Ike on 670cc mower. Thanks Ike and John for mentioning how importand wheel bearings are!!!
I once modified a similar bulb with the same problem. The fitting ring was soldered on and I used a plumbing heat torch to remove it and solder it back on a 12 v bulb. It worked a treat.
My brother and I both had Mini Trail 50’s around 1969. A buddy down the street hit a Trail 70 and I was so jealous. The mini trail would only go like 32 mph flat out whereas the Trail 70 FLEW down the street at about 45 MPH. I can only imagine one with a 190cc! Kinda like when another friend in the mid 70’s put a Suzuki 250 cc two stroke twin on a Honda US90 three wheel ATV. That thing was beyond scary. No one wanted to ride that thing!
Dude its so clean ,sounds so goood!!!!! And i love the old school red white and blue paint,very nice 👌 👍 awesome score ike. And I know you want to stay oem parts but........ look at a small 7' (aux beam )pod light, easy wire kit!!!! Fast. And more light then you would ever need!!!! And very cheap. It sucks not seeing at night when riding!!!!!!
Great video Guys!! Luv all the Ct 70 mods engine swaps etc.....You have made me drool to buy one but I will be doing it with a clone bike and upgrading the engine to a 190.....
You should put a 6" light bar from amazon. They work great! I put one on my '81 CT70 build. I have had mine for 33 years! Has a140cc on it now. Love your channel! Keep it up!!
-- TIP from Holland -- replace the axels for a little fatter ones (honda mbx80 probaly fit) I always rip the small ones apart doing wheelys i am also a big guy (sorry ike 😉), love the New bike your buddy did a great jow with the pouder and decals that engine finishes it
Love these type of bikes. Had a yellow Z50A when I was 16. Always liked the Honda Dax 50 (or Trail 70) but never owned one. I do own a Honda ZB50 though. Look it up. Fav bike. Great little city bike.
The person who is reading this comment i wish you great success health love and happiness i am from morocco have a good life for everyone here God bless United States of America ☺💟
HAHAHA I thought that was a bright ass LED or HID bulb when I saw that bright white light. Never thought that it was a 100% overdriven halogen bulb. Can't wait to see this build completed.
big fan been here for years yall inspired me to start kart fab cause its so many here in s.c yard almost full thinks to yall keep it up and much respect
For the tank, get as much of the fuel out as possible and try plastic welding it. I've done it before on plastic 3 wheeler tanks and have had good results. Done it on 3 wheeler plastics too! And in your case it would be hidden if it doesn't come out as pretty as you would like.
If you are into replacing wheel bearings you should also change headset bearings too. I always change them over to taper roller bearings first thing. They are way safer and easier to adjust.
Waiting on the Polaris build. I don't know if you realized it but when John did his closer it was sitting in the background what a tease..... anyway stay safe have fun!
For the leaking fuel tank - They make plastic weld kits. It’s like soldering with plastic. Or you can melt it together with a actual soldering iron. Just FYI 👍
Did you know they make a big bore kit to bring these to 212ccs & 24 horsepower? I think we need one.
Even though I'm a paraplegic now I still wish I had my little CT-70 I had as kid back. I'd like to restore. I wish I had my YZ'S as well.
You might as well but a small turbo on it because hell why not
Thanks for doing this I didnt think you guys would
Whoops nvm I thought you guys built one. You just bought a China engine lol
That would make for a good video. I would love to see the power difference it makes.
What a clean bike! This over a grom anyday
Hey Vaseline, get back to work!😂
Agreed!
They should get a Kymco Spade though, i loved mine and you get EFI.
Wtf are you smoking grom way before this ugly ass thing
Take no advise from a guy with a mercury cougar.
You guys inspired me to fix up a old mini bike and now it rips
Video on your channel, or it didn't happen!
ruclips.net/video/Wo_2A31tnIgh/видео.html4
I noticed you are closing in on 1 million! Just wanted to say, I know alot of youtubers get negative comments. I hope you guys completely disregard those. I am a long time fan and think that yall represent yourselves well just being........yourselves. It's nice to watch content completely devoid of the constant humdrum of doom and gloom. Cars and Cameras is a great escape. Thanks! Keep Trucking!
As far as a custom headlight bulb goes, I have successfully unsoldered the metal disc and soldered it onto a newer, more modern 12volt bulb. Easier then you’d think actually. Love the build, beautiful ride guys!
Watching C&C is like going over to a buddy's and hanging out on a Saturday working on stuff...
I want one of these or any old Honda bike really bad, nice build
You need to paint that yellow headlight black so it matches the bike better !!!
That bike is sick but that yellow headlight is killin me inside. OCD getting the best of me.🤪👌
Right!!! Shoulda painted it black when he did the swing arm.....
Yeah, but it's in the style of the Rothmans livery so it "matches" the look of that which is presumably why the previous owner did it.
@@Griznant75 Then it should be gold, not yellow...
Why don't you get an adjustable height table like Mustie 1 has? You kneeling on that concrete makes MY knees hurt.
ruclips.net/video/Wo_2A31tnIgh/видео.html4
yeah those little air tables are pretty sweet.
Mustie has EVERYTHING!!! Its unreal he unpacked it all from his tiny little shed, still doesn't have enough room.
Because this is cars and cameras and it’ll be fine 😂
They ain't over 50 yet.
You guys have officially caused me to spend a bunch of money purchasing and building a CT70. Well done.
Wheel bearing...it happened to me one time while doing around 70km/h i felt some strange wiggle on rear wheel in my motoscooter called "Hulajstopa" but after stopping and checking if anything is alright i haven't noticed any problems so I continued the ride. After getting to home I felt again this wiggle and then noticed rear wheel moving from side to side so I dissasambled the axle and found out that my rear left bearing (on the sprocket side) wasn't existing any more, bunch of metal shavings where in hub and axle was almost cut in half because of ball bearings, so if the axle snapped while doing 70km/h, I would end worse than Ike on 670cc mower. Thanks Ike and John for mentioning how importand wheel bearings are!!!
This is the best looking trail 70 in yalls fleet by far. Absolutely gorgeous
I once modified a similar bulb with the same problem. The fitting ring was soldered on and I used a plumbing heat torch to remove it and solder it back on a 12 v bulb. It worked a treat.
I just mentioned the same idea, been doing it for years and it has never failed me! I typically use an iron instead of torch just to limit the heat.
"you meet some of the nicest people on a Honda" thumbs up
My brother and I both had Mini Trail 50’s around 1969. A buddy down the street hit a Trail 70 and I was so jealous. The mini trail would only go like 32 mph flat out whereas the Trail 70 FLEW down the street at about 45 MPH. I can only imagine one with a 190cc! Kinda like when another friend in the mid 70’s put a Suzuki 250 cc two stroke twin on a Honda US90 three wheel ATV. That thing was beyond scary. No one wanted to ride that thing!
Dude its so clean ,sounds so goood!!!!! And i love the old school red white and blue paint,very nice 👌 👍 awesome score ike. And I know you want to stay oem parts but........ look at a small 7' (aux beam )pod light, easy wire kit!!!! Fast. And more light then you would ever need!!!! And very cheap. It sucks not seeing at night when riding!!!!!!
Wahooo!! Its about time Ike gets something that actually looks worthy on the road!
That Honda 70 paint scheme is bang on. Engine sounds awesome. I'd get some mud tires for it.
couldn't agree more about the wheel bearing tip, i can't tell you how scary it is even going 40 mph on a ruttman when a wheel bearing explodes!
Best looking trail 70 yet, good job guys!!!
I keep watching these videos. I TRULY wish i still had my trail ct70!! Good lord!!
Honda is Number 1 ONE !!! Stay Healthy Guys !!!
I saw that frame in a previous video and I’m so glad u guys finally did a video on it
This thing is so damn cool! LOVE the Rothmans/HRC livery! It looks RAD!!!!!!!!!
Turned out real cool, guys. Thanks.
That's one mean 70 . Keep up the great work .
Awesome video yet again guys! I look forward to Monday and Wednesday so I can see what you boys have up your sleeves. Keep up the great work!
Hey guys I honestly think that's the nicest Trail 70 so far I'd love to own something like that.
That is a beautiful CT boys! Truly an awesome looking machine!
Thanks
MORE CT70 STUFF!!! Love these things, have a 72 125cc myself
It sounds great, I can’t wait to see it on the road.
ide buy that bike in a heartbeat. love the color combo
That white 70 is badass i like how it still looks original with the tires
Great video Guys!! Luv all the Ct 70 mods engine swaps etc.....You have made me drool to buy one but I will be doing it with a clone bike and upgrading the engine to a 190.....
Really enjoy y'alls content. You seem like pretty good dudes.
Thanks
Awesome build. 70 cc to 190 cc. That is buildling a Hot Rod
Brilliant as always guys.have a good week from the UK👍
You should put a 6" light bar from amazon. They work great! I put one on my '81 CT70 build. I have had mine for 33 years! Has a140cc on it now. Love your channel! Keep it up!!
-- TIP from Holland --
replace the axels for a little fatter ones (honda mbx80 probaly fit)
I always rip the small ones apart doing wheelys i am also a big guy (sorry ike 😉), love the New bike your buddy did a great jow with the pouder and decals that engine finishes it
Any trail 70 content is good content! Keep up the good work!
That's awesome ike and john you guys always find the deals nice bike I have a 1983 ct70 from Canada
Empty the tank put and use a soldering iron to melt the plastic together on the tank. Works really well and a permanent fix
Lovely looking little bike Guys
Best looking CT y'all have, thing looks clean
Thanks
The trail 70 content is amazing keep it up guys
These Trail 70s are sick.
Love these type of bikes. Had a yellow Z50A when I was 16. Always liked the Honda Dax 50 (or Trail 70) but never owned one.
I do own a Honda ZB50 though. Look it up. Fav bike. Great little city bike.
Vi divertitevi come dei matti, è forte seguirvi e vaiiii 🖐️ 👍 ragazzi
What is that beauty that ike was sitting in the beginning
Harley sportster
I see another long trip to Ike’s property. Thanks for sharing
I had a 1970 4 speed...... take that thing on the trails !!!!
That was a nice burnout I do have to agree with John..💪💪💪
JB weld the tank. It’s worth a try. The bike is awesome.
Seal All will seal up that thank permanently. Good looking bike.
the white looks so nice
Love these bikes man! 80's bike are amazing i picked up a suzuki lt50 also from the 80's and doing a build series.
Love the restoration!
Ever since I moved to Texas the latest word I've been hearing is: IT IS WHAT IT IS
Yes it is!
That’s words man
Big road trip, once it’s safe, like epic, long way round scaled down to trail 70’s!
That bike looks mint mate what a little ripper 💨
The person who is reading this comment i wish you great success health love and happiness i am from morocco have a good life for everyone here God bless United States of America ☺💟
Dang, I got to get mine all mod'd up now. My wallet hates you guys.
same lol
Great video guys. This Old Man loves it. 💝💝
Ive NEVER seen the inside of the pressed frame look so shiny. She's a beauty. Lumpy Cam time??? would sound trick with that exhaust.
Do another Road trip!!! Those are great!!!
Man that 190 is so sweet that bike is going to rip
HAHAHA I thought that was a bright ass LED or HID bulb when I saw that bright white light. Never thought that it was a 100% overdriven halogen bulb. Can't wait to see this build completed.
They have some really good products for plastic welding now the fix next fuel tank I've used it on mine and it worked excellent
Big fan of this one. Not that i don’t John’s trail 70 but I’m partial to the original look of Ike’s
big fan been here for years yall inspired me to start kart fab cause its so many here in s.c yard almost full thinks to yall keep it up and much respect
10:35 the point where all car and bike guys get an involuntary smile as it's about to start.
The floor makes a great workbench but my back says NO.
Hell yeah ike, that trail 70 is saawwwwweeeett
For the tank, get as much of the fuel out as possible and try plastic welding it. I've done it before on plastic 3 wheeler tanks and have had good results. Done it on 3 wheeler plastics too! And in your case it would be hidden if it doesn't come out as pretty as you would like.
Nice bike Ike, love the white.
The color scheme is money.
I
Like the restomode on the c 70
More long trips. Cool bike!
Just peaking at that green bobber at 5:25
Awesome I wanna see a trail 70 with a cool sidecart
I want to see the trophy kart finished
Me too!
True that
sick bike can't wait to see it on the road.
That's a good looking bike I must say
Really like the bike crying shame about your gas tank can't wait to see the next show
If you are into replacing wheel bearings you should also change headset bearings too. I always change them over to taper roller bearings first thing. They are way safer and easier to adjust.
Waiting on the Polaris build. I don't know if you realized it but when John did his closer it was sitting in the background what a tease..... anyway stay safe have fun!
2 minute drive from my house is yalls shop. what a trip
I love ikes burnout face lol
Guys I must say that's awesome
Smooth move getting Ike to do the wiring - I hate wiring!
Paint the headlight the same blue as the sticker on the frame
That was my thought too. Would look good
@@alexnelson7303 most definitely 👍
Nice looking bike remind me when I was a kid
Another brilliant video keep them coming !!!!!!!!
Ike has so much stuff cars, motors,motorcycles,ect massive collection i dont think he likes to get rid of anything
Don't forget boats.
And chickens
Someday, SOMEBODY Ike knows is gonna inherit a lotta real estate and a lotta junk!🤣
Man that burnout was awesome
No break in again lol.. Nice burn out! ne ways ur machine..carry on
Nice looking little bike you got there Ike.
Great video as per usual..... inspires me to make my own 😊
For the leaking fuel tank - They make plastic weld kits. It’s like soldering with plastic. Or you can melt it together with a actual soldering iron. Just FYI 👍