Might have to adjust the shroud if you have the full size M9 2.0, it’s as simple as removing two screws and sliding the shroud forward and reinserting the screws. Make sure your holes line up though.
Love S&W, love CAA/MCK, but I'm surprised you wear glasses (as I do) but haven't figured out that if you wear your hat with the brim forward it helps keep your glasses cleaner and offers less glare. Try it. You might like it!
Available for both. Just make the right selection from the pulldown menu. Options are "M&P9 / M&P9 Compact / M&P40 / M&P40 Compact " or "M&P9 2.0 / M&P9 2.0 Compact / M&P40 2.0 / M&P40 2.0 Compact ".
J wish they made one for the canik tp9sf would make it fun for me i would have to buy another gun and that is not cheap specially if i already have 6 and none are the models they make it for i do want a s&w though but in .45 so out of luck
All you gotta do is google. Believe it’s been legal for a couple of years now. Also I believe there is a paper that come with it or it’s on their website.
I have a 3.6 can't get the door to close all the way unless I move the barrel to a 4 in instead of the compact position.. now it locks.. fine shoot about 100 rounds at the range seems fine.. but should I be worried?
Does it work with the M&P 2.0 9c optic ready version? (Raised iron sights) I have two and would buy this in a heartbeat if I knew it fit the optic ready version
I need one to fit a S&W M&P 2.0 45. acp with the 3.3 inch barrel. Do they even make one to fit that model? I haven't found one that makes it clear it would fit said model.
They have a version that does but this one does not since it has a folding pistol brace and not considered a “stock” therefore it is a pistol and not an SBR
Dude good luck, I’m in Bogota right now and I can’t even carry a pocket knife legally. The general attitude down here is weapons are only for the army, police and the bad guys.🤦♂️
@@xk1119 Thank you very much friend, these countries only allow weapons to the bad guys and the public force, I would appreciate if you help me get the accessory, I would appreciate it very much.
Hmm.. at $250 for a plastic outfit for my gun.. I think not... if it was 60 or 80 bucks I would get a few.. .. thats literally only about 12 bucks worth of plastic ... what am I missing here on why the price is near 300$ for range dressing for my gun... I dont get it..
It's a stabilizer. Why would anyone pay 1500 for a suppressor when its just an oil filter in a can and only takes 10 bucks to manufacture. Same concept.
Interesting product. I wish the video was shot better - 1) put the camera on the product, not the narrator, and 2) too many closeups make it hard to really look at the MCK.
It's not the gun that saves you, it's your ability to aim. If you're a poor shot, then by all means get a gimmick rifle; at least you will fill protected even though you aren't. Your ability to aim and shoot, regardless of the weapon you use, is the only thing that can actually save you...
Are you okay? This is just another way to shoot, it may be easier than holding a handgun for some people, yes skill in aiming and hitting targets is a must but it doesnt matter what you use, its personal preference you nugget.
The MCK Roni does not allow for the lever safety. You have to do a safety delete and get the plugs to fill in the frame. Then you’ll be able to use the MCK Roni
Might have to adjust the shroud if you have the full size M9 2.0, it’s as simple as removing two screws and sliding the shroud forward and reinserting the screws. Make sure your holes line up though.
Explain more please. Other videos they slide it on no issue. Not mention what you mentioned. Thank you 🙏
Mine locks in but it's out of battery. The slide won't go forward, even though I have the shroud extended for full sizes
Thanks for the video. I'm getting ready to order and wanted to see some reviews with the S&W first.
Lee Maxwell hope it helped. Thanks for watching.
Me: "don't make a decision until you watch the whole thing."
Me, by 0:45: "yep"
awesome, very few things out there for the PC shield 2.0, was excited to see this, thnx for the info!
Mr_Det807 this will not fit the shield models
@@CDubOutdoor there is one that will tho
Love S&W, love CAA/MCK, but I'm surprised you wear glasses (as I do) but haven't figured out that if you wear your hat with the brim forward it helps keep your glasses cleaner and offers less glare. Try it. You might like it!
Is there a kit for the 4” barrel ?
Im looking for a kit for my S&W MP2.0 .45
Me too 4 inch ,Please let me know if you find one that fits , would be greatly appreciated.
We’re you ever able to find a kit for the .45? I have the original compact not the 2.0 but I’m looking for a kit for my M&P
i have the M&P Pro Core 9mm and it is having problems racking the next round it keeps catching.
Newbie here, which CAA MCK will work with the S&W M&P9 Shield EZ. With the injury to my left hand I have some difficulty now with the slide. Thanks
@@bobbielowe3340 unfortunately I do not think they make one for the EZ. You can call them and ask but don’t believe they do.
This is a cool thing to have to confuse the anti-2A people when they say Assault weapons need to be banned but hand guns are okay
Does it fit the full size 4.25?
I saw this and wanted to get one but I have the older SW40VE and wasnt sure it would fit. Got to make sure before dropping 300
Not compatible with that pistol
@@CDubOutdoor yeah I actually emailed the company and got the bad news today
Yeah I was pissed when they said not compatible
Just buy a glock
@@barronholmes7337 they have them now‼️‼️Sd40ve or the 9ve
Yeah, this was very helpful. Thank you!
Do you know if this fits the 1st gen m&p 9 full size?
Available for both. Just make the right selection from the pulldown menu. Options are "M&P9 / M&P9 Compact / M&P40 / M&P40 Compact
" or "M&P9 2.0 / M&P9 2.0 Compact / M&P40 2.0 / M&P40 2.0 Compact
".
Thank you! you gave some great info and saved me hundreds of dollars.
Glad this review helped.
I have been looking and looking with no luck. Does anyone know if you can use a Roni with a Smith and Wesson M&P 9c?
Thanks for sharing bro. That is good and accurate at 25 yrds
J wish they made one for the canik tp9sf would make it fun for me i would have to buy another gun and that is not cheap specially if i already have 6 and none are the models they make it for i do want a s&w though but in .45 so out of luck
Doesn’t make your pistol cool? What are you considering cool? It looks awesome
I got the S&W mp 9mm will that fit my 9mm shield or ?!
Do u know of any way to up grade first gen shields???
I’m in AZ as well! Also what are you looking to upgrade on your shield. I have some suggestions, if your still interested.
Do you know if there's a version that will work with the 2.0 5" barrel?
i believe the only version they have out for the M&P is for the 3.6 and the 4.25
They have it for 2.0
Romelious Desmus Maximus not for the 5” barrel
Anything for the 4” ?
@@dodgerblu3158 3.6 or 4.25
Will it fit the 5”?
Donde se consigue. Valor y se puede importar a Colombia 🇨🇴.?
Currently have a shield ez. Don't know which to look for now that I want to get a conversion kit.
I do not believe there is a kit for the shield yet, Message the people at CAA and they should be able to tell you 100%
I wanna say thanks for responding. I see you actively reach out to your audience and respond to comments. Got a good channel here.
Not a problem. Try to stay on top of it . Thanks for watching
Nothing for the shield. Only the compact and full size. I doubt they will ever make one for the shield, it's too small and only 8 rounds
I know this was almost 2 years ago, but they have a kit for the shield now
How do you know you're allowed to shoulder it? Not saying you're wrong, just wondering.
All you gotta do is google. Believe it’s been legal for a couple of years now. Also I believe there is a paper that come with it or it’s on their website.
@@CDubOutdoor Good to know, thanks!
No problem, thanks for watching!!
I wonder if the m&p 9c with the 3.5" barrel will fit.
Just the 3.6 and 4.25 barrel M&p 2.0 to my understanding
@@CDubOutdoor I see. Thanks for the info. Been planning on buying another pistol. Can't decide if to get a Glock or go m&p again.
They make them for the Glocks as well.
No, they make them for the M&P 9 Compact and the M&P 40 Compact www.opticsplanet.com/caa-smith-wesson-mck-micro-conversion-kit.html
Why won't it work for the 4 inch barrel model if it works for a compact 3.6 inch one? Does it explain why?
It does
@@dirtysouth865 Thank you.
I have a 3.6 can't get the door to close all the way unless I move the barrel to a 4 in instead of the compact position.. now it locks.. fine shoot about 100 rounds at the range seems fine.. but should I be worried?
Sweet little rig !
The say 9mm and 40 online. Does it accept the 45?
I don’t think they have a model for 45
@@CDubOutdoor that's unfortunate. However this is definitely an option as i was thinking of getting a 9mm or 40 2.0 45 gets expensive to shoot lol
Would this work on mp shield EZ 9mm ?
Will this work with the m&p shield m2.0? What's the difference between the 2.0 and the m2.0?
Does not work with the shields.
Where can I purchase this online?
You can purchase right off of their website i believe. If not there are many vendors on the gunbroker site
Does it work with the M&P 2.0 9c optic ready version? (Raised iron sights) I have two and would buy this in a heartbeat if I knew it fit the optic ready version
I'm hoping to see a reply, I'm in the same boat.
What was your accuracy like and distance?
can put sigma 9mm smith wesson , rigth
I got the 2.0 4.25 m&p9 with the safety. Will the safety be in the way???
Did u ever find out??? I have the same question
I need one to fit a S&W M&P 2.0 45. acp with the 3.3 inch barrel. Do they even make one to fit that model? I haven't found one that makes it clear it would fit said model.
Sounds like an m&p sheild to me. Are you sure its an m&p 2.0 AND 3.3"?
Possibly a stupid question but is there one for the first generation Smith and Wesson and one for the 2.0?
Sd40 sd9ve or sd40ve
One more stupid question but does this fit the M&P 45?
Any idea if this works with the Sigma series pistols? SW40VE or SD40VE?
Sorry it does not.
They have one for the SD9VE
Does it require the gun stamp that is $200
They have a version that does but this one does not since it has a folding pistol brace and not considered a “stock” therefore it is a pistol and not an SBR
@@CDubOutdoor thanks buddy
What beat is that in the background?
Anyone know if it works with the plus/performance center models?
I really don’t know the answer to that. I would call CAA and ask.
Have they made one for the s&w SD9 4 barrel? I really want one of these conversation kits
They do not make one for the sd9 yet.
Do you think they would ? When was this one released?
Hey they do make one for the sd9. Go to Caa Mck and at haze line gun websites.
Does anyone know if this will also work with the S&W SD9? TIA
I believe the sdv9 is shorter .
Hey man nice vid do you know if a shield 1.0 mag will fit a 2.0 looking for a drum and i can only find them for the 1.0?
All mags between the 1.0 and 2.0 should be interchangeable.
No, M&P 2.0 has different mags if I'm not mistaken.
Does the MCK give you more range and accuracy? How much more barrel length do you get? I’m thinking of getting this my smith.
I wouldn't think it gives you more range. Maybe more accurate because of stability. No added barrel length.
Would you know if it fits the 5in M&P M2.0
Unfortunately it does not
@@CDubOutdoor Aw man!! You gotta be kinding me!!!! 🤬 I own 2 M&P 2.0s the Full 5" and the Compact 4". So I am all SOL??
@@JoseKuroKen hopefully in the near future CAA will come out with something for those models. For right now they don’t make it for those.
@@JoseKuroKen 😂🤣😂 same here
I have just the regular 9mm shield will it fit
No. This will not fit any shield models
@@CDubOutdoor if I don't have the 2.0 it won't fit right
They do have one that fits the Shield. Www.Caagearup.com
Will the SW MP 1.0 work?
Yes. There is a M&P 1.0 version for the 9C or full frame with the 4.25” barrel .
Does this work with a mp with the manual safety. Thanks
Sorry, I believe it does not work with the safety
@@CDubOutdoor alright thank you
You can remove the safety
Chey no how do you remove it?
is this for the s&w m&p shield 2.0 9mm?
No this is for the 2.0 compact and full-size.
This fit a S&W m&p 2.0 5 inch barrel???
Unfortunately it does not fit the 5 inch barrel.
So are these now considered an sbr?
No it's a stabilizer. Get one before they're banned.
@@dethtour I did.
Did you have any issues on the charging handle? Like the Serrations wearing down?
Did you? Lol I’m interested in getting one not sure if I should tho haha
What about the 5" barrel?
Won’t fit it unfortunately
Will this fit the ez 9?
So this doesn't fit a 5" barrel?
Would also like to know
Good night, your video is very good, I would like to buy one, but I am in Colombia, how can you help me acquire, I appreciate your opinion.
Dude good luck, I’m in Bogota right now and I can’t even carry a pocket knife legally. The general attitude down here is weapons are only for the army, police and the bad guys.🤦♂️
@@xk1119 Thank you very much friend, these countries only allow weapons to the bad guys and the public force, I would appreciate if you help me get the accessory, I would appreciate it very much.
Please somebody can it fit ez shield ? Performance center??
No it will not fit a shield of any sort.
@@CDubOutdoor dang , but thank bro
Does it fit a 9mm S&W shield M&P 2.0?
como puedo conseguir uno de esos
Is this legal in California?
I’m not attorney and I don’t live in California but i always assume anything kinda cool is illegal there lol.
@@CDubOutdoor
GOOD ANSWER 🤣🤣🤣
Will this work an a Smith n Wesson sd9
Sorry I don’t believe it will.
I just got one for my s&w sd40 works with sd9ve & sd40ve as well
What 's the website ?
Cagegearup
Hmm.. at $250 for a plastic outfit for my gun.. I think not... if it was 60 or 80 bucks I would get a few.. .. thats literally only about 12 bucks worth of plastic ... what am I missing here on why the price is near 300$ for range dressing for my gun... I dont get it..
It's a stabilizer. Why would anyone pay 1500 for a suppressor when its just an oil filter in a can and only takes 10 bucks to manufacture. Same concept.
Interesting product. I wish the video was shot better - 1) put the camera on the product, not the narrator, and 2) too many closeups make it hard to really look at the MCK.
You should make one on your RUclips channel.
Anyone who knows how to shoot and isnt planning on robbing an AMPM isnt going to be wielding this one handed haha. Thanks tho i need one of these
My full size doesn’t fit
Is yours a 5 in barrel ?
This needs a shield model!!!
Man I got the 4 inch
They are all over price. 🤦🏻♂️
$280 is over priced? These things were $500+ when the OG Micro Roni came out.
@@filthykallahan6399 I'm still getting one, but considering most is palmer. Kinda OP lol
It's not the gun that saves you, it's your ability to aim. If you're a poor shot, then by all means get a gimmick rifle; at least you will fill protected even though you aren't. Your ability to aim and shoot, regardless of the weapon you use, is the only thing that can actually save you...
Are you okay? This is just another way to shoot, it may be easier than holding a handgun for some people, yes skill in aiming and hitting targets is a must but it doesnt matter what you use, its personal preference you nugget.
Of course a rifle is easier to aim and manage recoil than a pistol. Doesn't matter your skill, this will be easier to shoot
Does this work with the 1st gen s&w m&p 9mm shield ???
not for the shield only the compact 3.6 and fullsize m&p models
Are there any that will fit the 4 incher?
Yes I have one
Do you know if this would work with the M&P 9 Shield 2.0 EZ?
Unfortunately it will not, sorry 😐
@@CDubOutdoor Okay, thanks for the quick reply.
Is that MCK fit on high sight of mp9 CORE version or not?
Anyone know if the SW MP clone - Girsan MC28 will fit in? Can you find out for me please.. pretty boy.
My M&P is full size and chambered in .45 acp. Will this set-up fit my pistol? Also what is 1.0 and 2.0?
Do they have one for a m&m shield 9 mm?
Does this apply for the 45 ACP M&P?
Can you access the safety with the chassis on ?
The MCK Roni does not allow for the lever safety. You have to do a safety delete and get the plugs to fill in the frame. Then you’ll be able to use the MCK Roni
Will fit S&W m&p 22lr compact?
It will not. Sorry
Will this fit the M2.0 w/ 4.6 threaded barrel?
Will this fit the smith and wesson mp2.0 10mm?
Can it fit another gun like Glock Taurus or anything else?
Will this fit my h&k vp9?
Do these fit the s&w 40 sd VE?
Yes
Will this fit the 5 inch barrel
No