How do you keep a check engine light from coming on. I have a 2015 longhorn with push button start. When I disconnect the grid heater I get a check engine light light for grid heater voltage
Thank you for the fantastic video, love the dry humor! On my 22, won't I still need my grid heater though? Or do you just need this is specific climates?
We always take them off in our application, more so for performance gains. If you are in a environment where it stays 30 and lower all year then yes I would keep the factory unit on!
Anything from Maintenance related to performance items, Trans oil change on the 2020+, up pipes, manifolds, injectors, ccv upgrade, fuel filter upgrade kits, full piping kit installs, turbos. All of it. 2020+ would be preferred. When are you guys going to make a ccv billet upgrade kit for my 2020? I'd rather buy one from you guys than the other 3 letter company.
Not so fast, you will need tuning to prevent setting check engine light codes, then you will need to upgrade your 68rfe transmission (trans also needs new tuning,) both of which require finding a shop to do it which is very hard after what the EPA did to the Diesel Tuner market. The manufacturer and the gubmint both want you to just buy a new truck after 5 years. I speak from experience, 2 deleted cummins Rams, 2 smoked factory transmissions after 120,000miles. Super frustrating having to spend a lot of money making these trucks right, but if you can do it, they are runners for sure.
2018 2500hd stock everything. Will doing this throw any codes and keep the pickup from starting/running? Located in the middle of the country, so the temps vary seasonally.
@@POINTBLANKPERFORMANCE and then what? I'll need a tune to get rid of the CEL?? Does anyone make a "fooler" of some sort so you don't need the new tune?
We have installed in that application to be honest , if it did work the check engine light would come on if the power wire is removed from the factory heater sir !
@coast.cutter7552 We don’t sir provide any on the spacer plate bolts but if you’d like them we can grab those. For the fuel lines tight sir 29k of pressure go through them so put a little elbo on them you won’t hurt them.
How do you keep a check engine light from coming on. I have a 2015 longhorn with push button start. When I disconnect the grid heater I get a check engine light light for grid heater voltage
buy a tuner. I like the Mini Maxx personally. gets rid of all those annoying codes and tells your truck nothing is wrong with it.
The instructional video is fantastic, the re-install can stop at 20:00 for performance,🤣.
15K views and only 260 likes? This instructional video is amazing. Thank you for making this.
We appreciate the ❤️❤️ thank you sir!
Clear description of tools needed for removing grid heater and plate, then PRESTO, not one tool used for uninstall. Maybe the listed tools were used?
9:12 is where I took a long time to remove the clamp! Great info!
Appreciate you watching sir !!!
Normally when I do it, I'll clean all that soot on the air horn with some carb cleaner.
But good job
Thank you for the fantastic video, love the dry humor! On my 22, won't I still need my grid heater though? Or do you just need this is specific climates?
We always take them off in our application, more so for performance gains. If you are in a environment where it stays 30 and lower all year then yes I would keep the factory unit on!
Very detailed install. Can we get some like this for the L5P duramax gang
What we thinking you’d like to see?
Anything from Maintenance related to performance items, Trans oil change on the 2020+, up pipes, manifolds, injectors, ccv upgrade, fuel filter upgrade kits, full piping kit installs, turbos. All of it. 2020+ would be preferred. When are you guys going to make a ccv billet upgrade kit for my 2020? I'd rather buy one from you guys than the other 3 letter company.
@nickwarren5800 have you checked out our billet valve covers ?
Not so fast, you will need tuning to prevent setting check engine light codes, then you will need to upgrade your 68rfe transmission (trans also needs new tuning,) both of which require finding a shop to do it which is very hard after what the EPA did to the Diesel Tuner market. The manufacturer and the gubmint both want you to just buy a new truck after 5 years. I speak from experience, 2 deleted cummins Rams, 2 smoked factory transmissions after 120,000miles. Super frustrating having to spend a lot of money making these trucks right, but if you can do it, they are runners for sure.
Thank you sir for helpful information we appreciate it!
Very easy to install if you already have a C1HP!! 😎
Yes sir !!
2018 2500hd stock everything. Will doing this throw any codes and keep the pickup from starting/running? Located in the middle of the country, so the temps vary seasonally.
It will throw codes if not tuned sir.
Thanks for the video! Will removing the grid heater cause a check engine light, on a stock 2014 Cummins?
Yes sir it will!
@@POINTBLANKPERFORMANCE and then what? I'll need a tune to get rid of the CEL?? Does anyone make a "fooler" of some sort so you don't need the new tune?
When did riff raff get into working on diesels. Nice video!
Gang Gang👊
cummins service manul says leave fuel rail mount bolt loose so u dont crack the fuel rail
Excellent instruction video!
Thank you sir for watching !
Putting in the banks monster ram in mine, everything else is about to fall off.
Outstanding video!!!!!
Thanks for the detailed instructional video!!!!
Thank you sir for watching! We appreciate the feedback!
Great Video, more like this!! 🎉
Thanks for the input sir !! These are process to do that’s for sure !
MOAH FORD!
🤣🤣 Ford Gang out there somewhere !
hard to get man sized hands in a ford engine compartment
@williamray5639 🤣 I mean I use my good hand !
Great video!
Appreciate the feedback sir !
Does it fit a 2013 ford 650 with a cummins motor Non deleted
We have installed in that application to be honest , if it did work the check engine light would come on if the power wire is removed from the factory heater sir !
I have a 2017 6.7 3500. do I need the extension harness?
Is it a cab and CHASIS ?
@@POINTBLANKPERFORMANCE Crew cab pick up with an eight foot box.
@brunoxxx8776 Yes sir you will!
Any other mods needed for a grid heater delete? I want to do it on a bone stock engine
What year sir ?
@@POINTBLANKPERFORMANCE 2018
@@POINTBLANKPERFORMANCE That a yes or a no?
Yes sir you would have to turn off the grid air heater code !
Dude, this video is awesome!
Thanks for the comment sir!!
Did you just assume my gender?! Kidding. I do have a question though - are there torque specs on the fuel lines, and the spacer plate?
@coast.cutter7552 We don’t sir provide any on the spacer plate bolts but if you’d like them we can grab those. For the fuel lines tight sir 29k of pressure go through them so put a little elbo on them you won’t hurt them.
Nice thank you
🫶🫶 Thanks for watching !
Did you put a race plug on fuel rail??
4Th Gen yes sir.
What’s a race plug? I bought the banks monster ram air kit does it come with my kit?
No it get rid of the pressure relief that can wear out
Just get the bank's systems and call it a day
Just get the Banks System and call it a day we like it sir, but we don’t run any banks products and never will🇺🇸
how long will this take me on 2016
First time 3 hours !
@@POINTBLANKPERFORMANCE thank you