YES YES YES! I was trying to connect it and could not figure it out! I finally figured it out by watching a video in Dutch..... Thanks for doing one in English!
Hey Christian, I am trying as hard as I can to get the 3D and MA2 on PC to connect and no avail. At this point i Just want to give up on MA completely and us whats been working for me... I guess MA is just not meant to work for me....
When I click 'Add Present' under the 3D tab in Network Configuration, nothing happens. Both MA2 & MA3D have the same IP address, but they don't seem to be talking to each other. And it won't even let me input the IP address manually in the 3D tab in Network Configuration. Is there something I missed? I'm using v3.3.2.2.
Hey Christian, I was wondering if you were ever planning on doing that RZ mix or review, if you do is it possible for you to maybe put a cdj on the side? Because I was planning on getting an RZ and maybe getting a CDJ 2000 NXS 2 aswell. I would just love to see how they work together!
Hey Christian, is it possible to control the stepfade of a chasers with another executor fader? So e.g. you can make an "StepFade" master for all of your Chasers?
Hi Christian, Could you please give me a helping hand with the 3D? The session is properly connected, I've patched my fixtures but only some of them are visible in stage view and 3D. Is there something that I'm missing in patching? I've created the fixtures myself because I could't find them in the library. Thanks for your help!
I got them connected but my show file doesn’t show up on MA 3D. All of my lights are in the middle of the room and on the ground, nothing changes. I’m pulling my fucking hair out trying to get this god damn visualizer working.
Curious, if I want to hook up a 2nd computer, what would I do? I'm confused! Thank you for your video:) I really wanna run 3D during the show on another computer!
Hey Christian, I have a question. I followed all the instructions in this video, but when I go to my network config tab, under 3D, the version says 3.2.2.3 in red. My MA3D version is 3.1.2- Im not able to connect 3D to OnPC and i think that is the issue. Any suggestions?
I can "add present" but it will not lights up green the hostname and 3D says "standalone" but see the session on session tap. Anyone know what happend?
Hey Christian! Please continue making these MA2 videos they are really interesting!
Thanks man, helped me a lot. I'm building lights for church this weekend and couldn't figure out how to get the program running lol.
Thank you Christian, I was struggling to join anything on MA3D , then, thanks to you , it succeed!
Still working for V3.9 this was exactly what I needed. Thank you!
I have no present/ items when i try add new layer 3D in MA Network Configuration :
Yes thanks for this video man! really was going crazy not getting it to work
YES YES YES! I was trying to connect it and could not figure it out! I finally figured it out by watching a video in Dutch..... Thanks for doing one in English!
love it, still applies in 2020
Hi Chris, im stucked in the 3D where I need to set the IP of MA3D. Add present button does not respond. What did I missed? Thanks in advance.
thank you mr jacskon !!!! i'm borring all the day about this session member "yes" !!!! great thank's
Thanks man, I keep coming back to this tutorial. Super helpful
I was about to go crazy about this, can't thank you anymore!!
Thank you so much Christian, i was searching the whole internet and just found your vid by accident, now i know it!! Thanks so much!!
Thank you so much Christian Jackson
Hey Christian, I am trying as hard as I can to get the 3D and MA2 on PC to connect and no avail. At this point i Just want to give up on MA completely and us whats been working for me... I guess MA is just not meant to work for me....
Thank you for this.I couldn't find that missing Join button!
When I click 'Add Present' under the 3D tab in Network Configuration, nothing happens. Both MA2 & MA3D have the same IP address, but they don't seem to be talking to each other. And it won't even let me input the IP address manually in the 3D tab in Network Configuration. Is there something I missed? I'm using v3.3.2.2.
Hey Christian, I was wondering if you were ever planning on doing that RZ mix or review, if you do is it possible for you to maybe put a cdj on the side? Because I was planning on getting an RZ and maybe getting a CDJ 2000 NXS 2 aswell. I would just love to see how they work together!
yea i was having problems connecting.. might wanna make sure you have the right versions together also :)
It worked, thank you very much Christian!
Thank you. This video is really helpful still in 2021!!
Hey Christian,
is it possible to control the stepfade of a chasers with another executor fader? So e.g. you can make an "StepFade" master for all of your Chasers?
Thanks a lot for this video ! I was just about to burn down my computer to find that join button !
Aw man this was very helpful, glad I could find it. Thank you so much!!!
I am trying this with 3.4 but Net Control wont allow me to add a new Station. and nothing shows up in selct station when I go to Network config
Thanks for this video- very helpful!!
Why does my loopback speed connect at SLOW?
Hi Christian,
Could you please give me a helping hand with the 3D? The session is properly connected, I've patched my fixtures but only some of them are visible in stage view and 3D. Is there something that I'm missing in patching? I've created the fixtures myself because I could't find them in the library.
Thanks for your help!
I got them connected but my show file doesn’t show up on MA 3D. All of my lights are in the middle of the room and on the ground, nothing changes. I’m pulling my fucking hair out trying to get this god damn visualizer working.
holaaa Christian,,, thank you for the video...
i want to ask, how to enter the stage on ma 3d with sketchup file or 3dmax?
thank you for your time
Merci l'artiste. Tu es bien sympathique.
Why when i click the add present it did not show at All?
Curious, if I want to hook up a 2nd computer, what would I do? I'm confused! Thank you for your video:) I really wanna run 3D during the show on another computer!
YES! THANK YOU! Great videos my man. Subbed.
Thank you very much !
Thank you !!! Only this video help me!! I connect ma2pc with 3d. You best!!))
you saved my show :)
Man, I was JUST having this problem. Thanks!
Yessss needed this so much!
Ok mine says master 1? And it lets me to threw your process, shows ip address but isn't allowing me to add
Are you ever available to Skype and explain writing Bome files?
Thank you so much!!
God bless you sir.
This is so useful, if only that had existed a month ago :)
It did. we had it!
Hey Christian, I have a question. I followed all the instructions in this video, but when I go to my network config tab, under 3D, the version says 3.2.2.3 in red. My MA3D version is 3.1.2- Im not able to connect 3D to OnPC and i think that is the issue. Any suggestions?
Helped me out! Thank you!
Thanks!!! This video really helped
Hello, thank you so much for video, I did everything but session didn't change to green, can you help me, please?
thankyou so much sir
I can "add present" but it will not lights up green the hostname and 3D says "standalone" but see the session on session tap. Anyone know what happend?