Thanks for the instructional video, I just installed mine today using your video and it came out great. I called two local shops and one didn’t even answer the phone and the other said they don’t install spoilers. You saved me a lot of money 💵💵. Thank you 👍
I have a red touring and want to get the spoiler. My only complaints is the quality of the back up camera and my iPhone 13 doesn’t charge with the wireless charger
@@flako4u77 - yes, OEM Si/RS. I had to stick it on with 3M tape. It is not an accessory kit at all. It might be possible to locate and drill some holes, but I’m not that talented.
@@xp50player on reality you don’t need the paper at all. If it was me I will add little be of paint on the spoiler where the bolts go place on the trunk and drill were the marks of the paint where
Getting the template that goes from the edge to the center to line up right isn’t easy and makes you second guess if it’s correct. I’m trying to get the template to line up but it doesn’t lay correctly on the trunk because of the curves. I’ve done several of these on other cars such as my Lexus ES 350 but Lexus gives you a nice Mylar template vs the cheap paper that Honda provides. The center 3 hole template is easy to get right but again, the template for the outter edge isn’t good. I wish you’d shown how you lined up the template for the edges.
You right the temple its really cheap you really have to figure out by your own. What I did I made the holes 🕳️ on the paper where the hole marks at and use a marker to mark the holes. Than I compare both sides to make sure line up and drilled the holes when I was sure the all line up with the spoiler
@@flako4u77 The instructions call for touch up paint. All it takes is a little humidity/condensation for rust to start to form. All the washers do is keep out water from entering the trunk, not condensation from forming on the bare metal, or humidity from finding its way to it. I appreciate the visuals, but the level of work was a bit amateurish, imo.
Thanks bro appreciate it the feedback and well you prove it the 3m tape work if you have the link where you get the tape and what type will be nice so people can purchase it.
Then it's not functional and it will fall off at some point. You have downforces being applied to a spoiler that is not even sitting on top of the trunk...
@@mulattopapi9741 it won't happen after months... It takes longer than that, but it will fail. Be prepared to hear it fall off in the coming years... Lol
Unfortunately this spoiler would no fit on that vehicle, but Hyundai has another on the looks exactly or better than this spoiler bro. Let me look for it and send you the link
After installing you need to show some photos and how it looks. Don't just end the video like that man, give us some time so we can decide how it looks.
Sorry about that bro on my next videos I will take your advice on conversation. I did this one really fast because the owner had a doctors appointment and needs the car as-sap.
It can be intimate drilling on a new car, but if you take your time you know things will come up right. I did on a Dodge Charger too that was scared 😱 I have to ad a blade right on front of the spoiler 😂😂😂😂😂
Thanks for the instructional video, I just installed mine today using your video and it came out great. I called two local shops and one didn’t even answer the phone and the other said they don’t install spoilers. You saved me a lot of money 💵💵. Thank you 👍
You welcome most of the shops charge $250 for installation. I’m so proud of you bro well done!!!!
Wow this is much easier than what the instructions make it seem, thanks for posting this!!
You welcome anytime
Thanks for the video! I followed your steps and it came out perfect!
Good to know bro. Well done
Nice work! Thank you so much for the instructional video. This is my next project.
No problem new year new projects you can do it 🤙
Thank you so much! I was able to do this myself thanks to you, and hit the G spot just right!
Nice. What tools did you use and how difficult do you think it was? I'm about to try it soon
@@Omar-kf4um trust me looks scary but in reality its so easy just follow all my steps and you will be good brother
So glad my video work for you Tom. Thanks for the feedback 🙏🙏🙏🙏
Great vid man had to be scary drilling into the new whip
Yes it was specially when you have the owner next to you bro 😂😂😂😂
Thanks for the video. Got my 11th gen yesterday.
You welcome definitely give it a nice looking. Congratulations on your new rite
You dont mind if i ask how much is mortgage and how many years to pay ?.
Great video and great explanation. Super excited to this to my girlfriends car!!!
Thanks bro I bet she is gonna love it totally different looking car
Love the black on red!
I’ve got the hatchback and added the hpd spoiler and man it’s sick!!
Yes bro I bet looks like a million dollar rolling
Great video!! Thanks!!🍻
I have a red touring and want to get the spoiler. My only complaints is the quality of the back up camera and my iPhone 13 doesn’t charge with the wireless charger
Looks so cleeeean. I was thinking of using tape , but I don’t want the wing to be flying all over LA lol .
I will don’t use that for sure 😂😂😂😂
Looks good! Just freaks me out having to drill holes into my car! 😆
😂😂😂😂😂😂😂I feel you bro it looks intimidating but when you figure out and put all together all become so easy
Wow! Looks clean! I want the HPD wing and emblem but I don’t really want the other parts.
I totally agree with you looks more cleaner
Clean bro 🔥 What did you use to blackout your H emblem? I just ordered some PlastiDip & I have the same car !
I took them to my friends shop they did it for me. the plastiDip work pretty good too just clean the emblem with alcohol before you apply it
Great video....did you have to remove the plastic panel on the underside if the trunk? If so does it just pop off with friction clips?
No bro you have to remove only the parts do you see on the video no need to remove anything else
Do you got video on the black emblems install ?
Will this fit a 2022 Honda Insight EX?
Hi Hi. It turned out very nice.. where can I buy that spoiler
Can you use it without the screws and just the double sided tape ?
You can but it would not hold it for to long be ready to pick your spoiler on the freeway. No recommend it to leave it with only double tape John
I’m going to do this I have the same car!!
You will see the difference right of way little details like this one make a lot of difference on the car.
Make sure you subscribe I will add another videos of this car
Can you find any drilling template for the Si spoiler? It has 8 pins and 2 bolts. Different size fasteners too.
Let me check for you Player
@@flako4u77 - Impossible. The Si trunklid is unique sheetmetal with diecut square holes.
@@xp50player do you have the spoiler bro?
@@flako4u77 - yes, OEM Si/RS. I had to stick it on with 3M tape. It is not an accessory kit at all. It might be possible to locate and drill some holes, but I’m not that talented.
@@xp50player on reality you don’t need the paper at all. If it was me I will add little be of paint on the spoiler where the bolts go place on the trunk and drill were the marks of the paint where
: OUTSTANDING instructional info video. I have a 2023. It looks like the same installation. Once again thank for the video.
🐢 🛠 🐢 😀 🐢 👍
Can it be just installed with double sided tape instead of drilling?
You can use double tape but at one point its gonna come out flying at the freeway. I see that happened all the time
When you hit the g spot choowwwww
Bro totally truth or not its how we do it 😹😹😹😹😹😹😹
WHAT ARE THE SIZES OF BOTH THOSE DRILL BITS?
The last one was 11/32 drill bit the first one you can use any small size bit
Did it come with screws?
Izzzy it comes with three clips and two bolts. It comes with all you need
can you link to where you bought this dyi spoiler?
Here its the link where I purchased mine
www.collegehillshonda.com/product/08F10-T20-110.html
Getting the template that goes from the edge to the center to line up right isn’t easy and makes you second guess if it’s correct. I’m trying to get the template to line up but it doesn’t lay correctly on the trunk because of the curves. I’ve done several of these on other cars such as my Lexus ES 350 but Lexus gives you a nice Mylar template vs the cheap paper that Honda provides. The center 3 hole template is easy to get right but again, the template for the outter edge isn’t good. I wish you’d shown how you lined up the template for the edges.
You right the temple its really cheap you really have to figure out by your own. What I did I made the holes 🕳️ on the paper where the hole marks at and use a marker to mark the holes. Than I compare both sides to make sure line up and drilled the holes when I was sure the all line up with the spoiler
Why didn't you paint the holes? The trunk is going to rust (if it hasnt already) since you left bare aluminum.
The wing comes with plastics that prevents the metal to be exposed to the outside elements so no worries about any rust
@@flako4u77
The instructions call for touch up paint. All it takes is a little humidity/condensation for rust to start to form. All the washers do is keep out water from entering the trunk, not condensation from forming on the bare metal, or humidity from finding its way to it.
I appreciate the visuals, but the level of work was a bit amateurish, imo.
Well that makes sense too. Next time I will take your advice in consideration and paint it. Always open to new ways to improve the way I do things
Where you located and how much do you charge to install same car but white
I stay at South gate I do it for $100 if anything just shot me a message on my fb bro
facebook.com/flakoserrano
@@flako4u77 ok I’ll look you up,do you know where to get this same spoiler?
Link
@@rene19866 I got it from the Dealer let me find a link for you bro
@@rene19866 here is the link you can purchase the lettering black too up here
www.collegehillshonda.com/product/08F10-T20-110.html
Best spoiler I have ever seen for civic fe! looks clean and cleaner than RS version spoiler. Anyone have an idea where to get this in Malaysia?
Thanks for the feedback and really I don’t have any idea where you can get it up there
@@flako4u77 got it, enjoy your ride!
@@meGusta2878 you still want this?
Na no drilling for me lol! 3M tape all day mine has been on for months nice and sturdy 👍🏾
Thanks bro appreciate it the feedback and well you prove it the 3m tape work if you have the link where you get the tape and what type will be nice so people can purchase it.
@@flako4u77 your sexy flako 🤣👍🏾
Then it's not functional and it will fall off at some point. You have downforces being applied to a spoiler that is not even sitting on top of the trunk...
@@DaKurupt19 update …months later still on lol…
@@mulattopapi9741 it won't happen after months... It takes longer than that, but it will fail. Be prepared to hear it fall off in the coming years... Lol
Can Hyundai Sonata lf 2015 fit this spoiler?
Unfortunately this spoiler would no fit on that vehicle, but Hyundai has another on the looks exactly or better than this spoiler bro. Let me look for it and send you the link
@@flako4u77 ok thanks bro
After installing you need to show some photos and how it looks. Don't just end the video like that man, give us some time so we can decide how it looks.
Sorry about that bro on my next videos I will take your advice on conversation. I did this one really fast because the owner had a doctors appointment and needs the car as-sap.
It’s not going to rust bare metal ?
May be on 20 years later but now the car still like new. Just make sure you put the plastic seals on it and you will be ok
Hey there where you buy this and how much it is
I bought it here www.collegehillshonda.com/product/08F10-T20-110.html and goes about $230
@@flako4u77 thanks brother
@@seananand4981 you welcome brother anytime
How much did you charge for this install?
S550 I charge $150
@@flako4u77 for the emblems and spoiler together $150?
@@Travis.Rivera the $150 is for labor the wing by itself is $199 here is the link if you need it
www.collegehillshonda.com/product/08F10-T20-110.html
@@flako4u77 i know i was asking if you install the wing and emblems for both $150. Thank you tjoguy!
@@Travis.Rivera yes brother I charge the person $150 for all wing and emblems
Listen for the G spot….I mean the click!
He he he he he did you hear it bro 😂😂😂
Drilling a brand new car must of been nerve racking.
It can be intimate drilling on a new car, but if you take your time you know things will come up right. I did on a Dodge Charger too that was scared 😱 I have to ad a blade right on front of the spoiler 😂😂😂😂😂
Ill pay you to install my wing please. Im scared to mess up
Where do you live at bro? If you live on LA we can do it together no problem
@@flako4u77 I live in Venice Beach actually. Can you tell me where to buy the wing at? Amazon?
@@brians2612 I live on South Gate let me send you the link hold on
@@brians2612 I ordered from here bro
www.collegehillshonda.com/product/08F10-T20-110.html
Very stressful to watch when drilling into a brand new car😣
😂😂😂😂😂😂😂 tell me about it bro no room for mistakes 😂😂😂😂😂