OH BOY: I Bought a $375 Coupe
HTML-код
- Опубликовано: 26 июл 2023
- Join this channel to get access to perks:
/ @brew2lfoxbody
You can order all your Amazon needs through this link while supporting the channel amzn.to/2KvzVEl
WANT BREW2L DECALS? www.shopbrew2l.com/
LINK TO SHIRTS: / @brew2lfoxbody
SUPPORT THE CHANNEL BY USING THIS LINK ANYTIME YOU NEED ANYTHING FROM LMR👇
LINK TO LMR HOMEPAGE latemodelres.to/BREW2L
INSTAGRAM / brew2l
BREW2L MUSIC: Music For Gear Heads open.spotify.com/user/1271816... Авто/Мото
I'd like to see you guys just get it on the road and driving, then go from there. I think it would be cool to see you guys just do a small budget build, kind of gear it towards the young folks out there who are just starting to get into cars/foxbody's so they can see what can be done on a tight budget and of course see the work that they'll be getting themselves in to.
Love this idea.
I always enjoy the old school budget street car builds with junkyard parts, pull a 351 out of a truck, hand port a set of explorer gt40 heads, used performance cam, carburetor, t5 maybe put a good set of gears depending on what it has now. For a pretty cheap build that most anybody could do, it would be a decent car with enough power to be fun.
Im sure yall could swing a basic 302 with a carburetor and a nitrous kit. I think people will enjoy the process of getting it going and getting it dialed in
Nice winter project right there, good content for the channel 👍
I like the idea of throwing some draglites on , a carb set up , used interior dyed and a budget paint job with a nice polish job
Budget race car seems like a good idea. Would be a fun build and might get you back on the track. You already have the whole nice street car deal covered.
Good point!
No such thing as a budget race car
@@ecc5119 10k vs 250,000 or more is budget
I think a budget race car would be cool, like a lot of ppl here do. I think you should paint the car though.. I’ve always enjoyed watching that transformation. Like the ole lx turning into the calypso clone
Dude I'm 100% vested in this project! Can't wait to see the progress.
Thanks 😊
Use the 302 out of carbon fox, and make some content on rebuilding the motor for all of the DIY guys. Slap in a T5 that's laying around, GT40/40p heads, explorer intake ,find a dash and engine harness, and run the megasquirt that's always floating around in the background.
Id make it a "rat rod". Giver a e/b303 cam, carb, and glasspacks. cut the springs. trans is whatever is on hand. Could look at patina restoration work like vice grip garage. Jacked up door is character, bailin wire the bumper up. I think it would shake things up but not cause a stir.
Gotta be a 351w 5 speed carb nitrous since that's the only car u don't have one the channel
351 with a carb and 250 spray.
Milkcrate seat and junkyard motor and drive it baby, LOL... seriously though... I know many of us have leftover parts just sitting from over the years. Ever consider taking parts donations to build something out of them and then maybe raffle the car off or do a giveaway?
Thanks bro
Primitive home made dash made with sheet metal and water temp, oil pressure, volts, tach, and speedo. Leave room for possible boost gauge. Have fun fabricating something. Or trade parts for someone who can build one for you, something a shade tree builder might do. As far as exterior keep it “M@d M@x Fox” looking looking.
Talked em down $125…nice 😂
Yep 😎✊
Have you seen TIP’s Shitbox Fox build? I’m getting those vibes. Leave the bodywork alone, get it running/driving, mechanically sound, decent interior, slam it, cam it. 💪🏼
Gona be cool to see what yaw come up with.If it was mine that baby has got racecar 100% written all over it to keep it cheap.I would probably do a 351 with some decent heads with a 5 speed and just have a blast!!!
2.3 Ecoboost corner carver... 5 lug swap, black 17" steelies from a newer stand. Do some fake patina on the Ecoboost to make it hard to identify, and keep people guessing. Do some patina'd race car lettering on it. Make all the parts look old and ratty like it's an old race car dug out of a barn.
I’m a hatchback dude but it would be great to watch you build it!!!!👍🏻
WOW I'm Honored for the mention of my car for inspiration!
Since the car is already so stripped down. Why not turn it into a canyon carver? Put wide wheels and sticky tires on it. Put a big brake kit on it. Hopefully, the sponsors could help and you could upgrade the suspension and tighten up the subframe. You wouldn't even need an interior or full dash. Two seats and a few gauges would be all it would need. With the fun you could have pushing corners you wouldn't even need a really high power engine. Just a really good radiator to keep it cool while pushing it.
Excited to see what you guys do with this one 💪
1. Coyote and 10r80/6r80
2. Godzilla and 10r80
3. Ecoboost and manual
4. BBF and C6
5. 351w and t56
6. Full 5.0 Tussin junkyard racer (gt40p/t5)
7. Brew2l shop parts car
Awesome! I'm picking up a 86 coupe this weekend in about the same shape. Can't wait for future videos.
Definitely following this coupe. What ever option you do decide to go with I’ll be enjoying that there transformation. Mine looked like that one tor and it’s come a long way
Truly your choice, I really like the bare bones road worthy route, all of us Foxbody folks has stock style parts or never know what we all could donate, probably better to send money than try to send you parts, just my thoughts, I say do a live stream and discuss it
I think we will do a livestream and discuss it ✊😎
I'm digging it 👍its alot of work but that's what it's about getting them road worthy again
Autocross, lemons, drift, do they have rally cross in your area? Just having a car you can beat on is fun, take it to the mountains and play Dukes of Hazzard on those windy dirt roads.
I think do the bare minimum to get it running and roadworthy, motor, clean it up, slam it on the freaking ground and some nice looking rims! Maybe a full interior, or hell maybe even an interior swap since you're starting from a blank canvas, new edge, s550 if you can get it cheap, lol
I would love to see old school hp basic camed 302 with a carb shot of nitrous with draglites
Haha, be interested in a mcnuggets vs your poop coupe build. Just may want to stay away from a third pedal since seems folks can power shift these days.
I think it'd be sick if you got it running and driving as cheap as possible and did a giveaway. I'd buy a lot of merch😂
Broo that shit sick! I was like damn when I saw the inside that be to much for me but your def the man to revive it ona Budget bro it's gonna look sweeeet💯💯
Hell yea, I'd do everything custom/budget friendly, skinnies in the front, fat slicks in the back. Stock 302 with a big ole nitrous shot. Forget the dash, just make one out of some aluminum pieces, rivet them together and stick it in, a bucket seat and a harness. Maybe a roll cage? Send it
Budget build, get it back running and driving then do a giveaway. Something along the lines of what FoxCast did with 4 to 8.
I like where this is headed, keep it budget with tips and tricks! AND keep it manual!
Make it different. LS swap it with cage and custom made aluminum dash and such. All your cars are mint, make this one rough cut and a beast.
Nice! I am just about done with my 91 that was in about that condition. I would recommend the fiberglass dash and be done with it
You mentioned sponsors & my thought (s) paint it back purple with the fat /skinny welds and build an "Official Sponsored Car" ... Aka Rolling Billboard showcasing each of the contributors / part suppliers used to bring her back to life " New & Improved " ✌💯
I'll be tuning in to see what goes down with this one. An ssp style would be cool.
3:06
Confession time.
I did that to mine once when I got it stuck in the mud in a job site when I worked construction. Just kind of bent it in one spot.
But in my defense, mine has the X braces under there.
But yeah. I did it.
But I’ll straighten it out someday.
at the end of the last century, it would be easy enough to pick up a dead, optioned out Mercury Cougar V8 and swap most of it over--maybe even an electronic dashboard setup--into a roller like this (if you didn't want to go dirt track racing). but now even those parts cars are probably too musty and crusty to use without having to repair mouse-eaten wiring.
Why in the hell can't I find deals like this!
😂 🤷♂️
Given the state on this car, it’s a blank canvas. I would like to see something completely different. If it was me I would build a cyber punk post apocalyptic car anything goes!👌🏻
I was actually thinking about something like that.
Maybe just paint it and do a roller give away. Or just to see it on the road as a daily driver. 4cyl ecoboost would be neat too. Its a blank canvas.
That's it! The Poop Coupe VS. The Crotch Notch! Bragging rights and tons of fun!!!
Perfect time to repair the panels and paint it.
No new parts! Dig in the parts bins! Budget, budget, budget! Cruise some swap meets find some stuff on marketplace, just be a minimum wage high school kid with some good friends putting some junk together and have fun! I would love to see something fun like that.
Will it work? What the hell , try it and see what happens.
I think clean compared to what I started with my was just shell no dash no body panel everything was strip took few years peace it together but now it turbo 306 with about 600 hp tires and drive it a lot because u and neo mustang thank guys for inspiring people to get out and drive them get out and work on them
Excited to see what going to happen here.
I would like to see this completely restored with one of the new 4 cylinders turbo ect that has alot of horse power that comes in them in today's world that would be awesome
In an old coupe I used to have I had a stock bottom 306 with some 65 hipo heads with 1.6 rockers, Vic jr intake, 650 carb, e303, and a nitrous works 125 non adjustable plate kit that car went 6.40’s and that was 15 years ago
I knew that was going to happen as soon as I tuned into the live stream! Lol 😂❤ go getting!
lol Andrew was already on his way to get it 🤣
Maybe make it into a corner carver possibly widebody the possibilities are endless it all depends on how You want to proceed ! You say You have a shed full of crap but if it's useful it's really treasure ! Best Wishes & Good Building ! 🇺🇸🇵🇷🦊👍
Just, put the 50tussin on it!
Oh the possibilities, this will be a fun project
That for sure was a 4cyl car . You can tell by looking at the camber plates . I know I own a 2.3 v8 swapped Lx coupe .
would love to see you save this in a cars and coffee kinda of way. nothing crazy staying true to the budget roots of the channel. show the average guy (like myself) who isnt a mechanic but can do bolt on stuff how far they can go without breaking the bank and also what they can do themselves. where you use a sponsors product just let us know how we could do it if we didnt have a sponsor. you always do a pretty good job of doing all this anyways but maybe this could be a little more in depth for the beginners out there who are afraid to take on a project car. just my two cents thanks
I'd like to see a streetable daily with no frills. Some body work, functional dash, get to work and home, notchback!
The heads we talked about!!
I like it! Low buck beater fox. It should be fun.👍
About time got a notchback.🤟👌
Put it together with the parts you have. From there, make it a multi step build.
Similar to the old GrayGhost👍
Not bad for what you paid Brother! I say make it a decent daily driver. Something you would not hesitate to drive from A to B and still be able to have a little fun doing it! 💯👊🏾👊🏾
Do it like the infamous project did with the shitbox fox !! Have subscribers and people who watch the channel donate parts and watch the build on the channel as the parts come in ! Then he drove it to detroit from texas and won best of show ! Car turned out great and it was all donated parts and he got interior dye and made it all
One color and re gasketed the motor and replaced major mechanical parts and its one of the best fox’s out there man ! Make a badass sleeper 347 out of it or swap out one of the set ups from ur other cars and put a bigger set up in the one u took it out of . Shoot man foxcast has parts cars all over the place ! Can it be done by octoberfesT with the donations ? Build it from now till then and then drive it to foxtober fest ?
You know I’m not on board with this most of the time but a junker LS makes sense here and be a lot of fun it’s already set up for it 🤷♂️
If your thinking race car and using pretty much stock parts I'd say throw on a carbureted setup with a 200 shot. Best way to go fast on a budget.
when i saw the outside of the car i thought, not so bad. then you showed the inside. i burst out laughing. Let me just say that you have BALLS to take this on . honestly, you will win. you always do, this Brew is for you. It kinda reminds me of a daily driver for Buford T Justice.
351,carb.long tubes, bullets, fat and skinnies, black primer rattle can paint job, 5 speed. Shot of juice optional… and I have a cheap 351 if you dont
A beat up sleeper car/ decent mix match interior but with a nice clean engine bay only...That would be sweet!!!!
Fuel cell, carburetor, v8 of some sort, glide, nitrous, wheels, suspension and leave it crusty
"Frankenstang" it.
Charity bucket-junkyard dog-call it what you want
I’m down for a legal(ish) safe fun driver with little manners and mildly quick
Most smiles per gallon
Edit: basic 302, carbed, small nitrous kit, good parts enough to not blow up the first time you hit it
Beater low budget drag setup 👌
Budget track car man. Let's see that thing hook hard from the get go. nothing crazy carb swap etc
This is gonna be awesome to watch because my hatch is basically like this too but with interior!
It’s gonna be fun! 🙌
@@BREW2LFOXBODY it is gonna be sick!
Crazy they painted the engine bay purple 😲
GT40P heads, intake, and any cam rather stock or aftermarket. Junkyard parts running junkyard cars.
1:43
DOES THAT SAY
ONE
THOUSAND
DOLLARS????
What were they smokin when they got out the white shoe polish??
Good lord.
Lol
Build using all used, junkyard, leftover parts. See how cheaply you can make it run good!
I hope you restore it DIY like the calypso 🙏🏼
Carburetor 302 5 speed nitrous plate equals budget and fun
This deal has 50 Tussin all over it !!
My only stipulation is NO small block Chevrolet but I know you'd never commit sacrilege like that. I don't know that it would be a very popular choice on the channel but I wouldn't scoff at the idea of 2.3 turbo possibly being used on a project at some point. I don't quite think that I use the term exotic to describe them but they're definitely different and that's what I like about them.
Ok so now i just got 1/2 way thru the video and you said ( tell me what you want to see) id like to see you build it with spare parts you have and make it run as good as you can as cheap as you can and call it the spare parts car … i have one i throw all my spare hot rod parts on just to drive around town .. if i had a converter for it id say it would run really good
Love it throw a 5.0 from a explorer in it with a carb
Gawd damn son, you sunburnt as hell brother!
2 things:
1- gap those rings for nitrous. We need a nitrous build on the net.
2- You know you'll end up painting that thing, it's what you do lol
302, 4 bbl, Ecam...simple, old school... T5 would be good $, but even a 303 three speed or C4 with 327 or 355 gear. Just make it a fun weekend driver to rip around in.... Not some highway demon cruiser. Junkyard Toyota seats 🤔
Kinda like the Gray Ghost used to be.🤔🤔🤔 Light and quick.
$50 gallon bright red acrylic enamel 👍
you've got a good base engine already.
Maybe even the engine from the Gray Ghost?
Ill bet you can do it for TWO GRAND.
There's a challenge.
$2,000 total.
Show us $ poor guys it can be done.👍😎
YeeeeeHaaaaaw!!!!
Build it to race "occasionally" but do it 5.0Tussin style with your touch's....stock block stick shift...... You literally just said the same thing as I was typing 🎉🎉
Use what you got and have fun with it😂😊
50tussin!!....with some missed 2-3 shifts! =)
so much potential
Like to see it restored at least mostly 😊
Put a 5.3 in it with a upgraded cam and nos. Be fun to play with
That's sacrilege Ford should stay Ford in My opinion. 🇺🇸🇵🇷🦊👍
Bring it to FTO next year for the burnout box.
Just throw an SN95 dash in it, get one for like $250 at the junkyard. Keep it cheap.
Yea go carb flows with dumps fuel cell some nitrous drag lites ..
Budget N/A car With a 302 efi t5, cheap upgrades and make it look halfway cool
You should make a super clean fox just like the white one Andrew used to have