I love how transparent and honest this company is. You know exactly what you're getting for the price you're paying. It's perfect for most civilian use and nobody needs a 1k+ armor setup unless you're a real warfighter. Plus you're supporting veterans as an added bonus
I ordered this in the bundle day the sale went out. Also ordered the additional 3 mag pouch. So now this runs 6 mags on front and couldn't be happier. Combined with the V1 battle belt, I've got a really well put together system. If your running on a budget, this is a great system. It's a budget cost system but far exceeds what others are in budget quality, this is top notch stuff.
Bought mine at launch, and it’s safe to sayI have put mine through it’s paces (through several milsim events) and it’s holding up very well. Say what you will of airsofters, but I’ve probably spent more time crawling, running, and abusing this thing than most and it’s taken everything in stride. Highly recommended.
I finally got an email informing its back in stock. I ordered one in FDE, SAPI cut for 10”x12” plates and a set of trauma pads for $189.00 shipped! Thanks Jake! 👊🏼
After a lot of research, I bought a Tacticon molle rifle bag for my Zastava AK earlier this year. Tough, plenty of pouches for mags and accessories and the built in shoulder straps feature for carrying on my back is great. Absolutely love it. Wanted a chest rig or plate carrier for AK mags. Bought a chest rig from another manufacturer and wasn't really happy with it. I wanted a true plate carrier and went back to Tacticon when I discovered they made the V2. I'm not ex-military or LEO so I'm not an expert, but from my experience the fit and features of the V2 are amazing, especially at this price. Just check out the plate carrier pricing from other companies. I just needed to re-knot and lengthen the pull tabs for AK mags and adjust the shoulder straps, but those were the only adjustments I needed to make. This a fantastic company that knows what sport shooters need and they offer a well built product at a fantastic price. Very helpful vid as well. Kudos to the team at Tacticon!
@@danielmackormack8524 Yes sir! You can get the 36-in bag to accommodate the 16-in AR or you can get the 42-in bag if you plan on putting a larger rifle in with it down the road. It's a double rifle bag so It will comfortably hold two rifles but isn't any bigger than a single rifle bag believe it or not
Great job "Goober" Guy.. Great looking product ..I am definitely in Brother..put my others (3) to shame and straight into storage.. Be Safe & Be Vigilant...Peace Out✌️
Bought one of these and the lite. Wasn't a big fan of the lite at first but has grown on me. Use it for the range. The V2 is def more comfortable with the plates on and like Nolan said, really good balance
I like the bungee that you can replace like this vest has. The problem with elastic is that when it's exposed to the elements, over time it can become brittle and lose it's elasticity. When the elastic portions of the cummerbund are sewn into the vest, well you'll have a hard time replacing it, but when the cummerbund uses bungee such as this one, which can be replaced for literally pennies, that allows you to have an elastic cummerbund that will last for the whole life of the vest.
I bought this to play Airsoft and it is great and it fit me very well I am 13 years old height 5,3 and I am skinny I would definitely recommend this product
Got this just to have with soft armor and to use as a magazine carrier. I have your 3x magnifier and a eotec for the money yours isn't half bad and is better than my Sig Juliet even.
I just got mine, for the half off or 40% off coupon its not a bad deal. I looked it over and over all it was alright for what your getting. Few minor things where had to burn away a ton of nylon frays that where all around it,for something mass produced I was kind of expecting that. Only other problem their was a pair of the molle rows in the back where the cummerbund weves in that the threads had come undone. I honestly did not wanna do a return so, a quick five min on the sewing machine fixed it, yea probably violated the warranty but whatever easy fix. For what it is its not bad for what your getting if your looking for some entry level gear on the sale price. I mainly got it out of curiosity or as a throw your buddy to try out, maybe add some padded shoulder straps for heavier plates and your kind of solid.
I don’t know why I’m excited, I already own one and just got another. Same thing, different color. Keep coming back because the quality is there. Fits 2x 308 mags in the pocket great. Ditch the flag and get a shotgun card 😮
@@peterlogan2105 It's just all the eco-friendly bamboo filled low-carbon footprint vegan non-GMO gluten-free food we've got out here in the Communist Republic of California.
For a first time vest user I learnt a few things, I bought the BattleVest Lite Plate Carrier which is more expensive than this one and 500 D nylon, I have not receive it yet but seems like there is no mag carriers. What is the difference between this BV2-REG-BK BATTLE VEST V2 and my SKU: BV-LT-MB ?? Ty
You said 500D but your web site lists the material as "900D nylon". Which is it? A suggestion, the molle webbing is bar tacked but the shoulder straps aren't. Perhaps consider bar tacking where the straps meet the plate bags as well. I bought one on your Amazon promotion and liked it. After checking that it would adjust down to fit my 4'10"/105lb wife I picked up a second for her.
i wanted a vest/plates mainly for training. i was looking at 5.11 and rogue and i was able to get the tacticon bundle for less than it would have been to basic weight plates and an equivalent vest. and it stops bullets
Held together by elastic Paracord. When constant pressure is applied to the knot with the stretch of the woven Paracord, Then it completely disables any possibility for the knot to be disassembled or to come undone.
it can accommodate up to 1.3" thick plates. PLENTY of room while still giving you internal retention straps to keep it in place. Thanks for the question!
Just ordered one off your website also purchased trauma pads for it. It didn’t give me any tracking information or email about it so I’m wondering how long it would take to deliver
Thank you for reminding us that we all look good lmao and honestly you sold me with thia video. I'm gonna need a multicam one ASAP. Update: Got a Ranger Green one instead and love it.
I just seen another product of your guys it was another plate carrier how did you guys get away with perfectly copying the agilite k19 plate carrier and I'm wondering where you guys cut Corners to get the cost down so low?
Good question. Here's the rub. We start development on a product with a baseline in mind. A carrier that's already tried and true and well-reviewed. We dig deep into the bowels of the internet to find the NEGATIVE feedback (even on the k19), then we fix all the small issues that the product has. BOOM... the perfect carrier. Without the need to spend $100k on R&D and simply fix a few things on existing products, manufacture them in insanely high quantities, AND sell them in high volume (and just fundamentally not get greedy with our margins like all these other companies are) we are able to sell them at often 1/3 of the price and still standing by our LIFETIME WARRANTY. Thus... leaving our R&D budget wide open to develop the worlds most innovate armor... which... we do. We only have so many units of energy to devote to true innovation so we put that into our lifesaving armor technology. Hope that helps explain some things my friend!
great question! From my testing and experience yes. This is Nolan here, I don't have combat experience. That being said I have shot quite a few of our plates inside of the carriers. From my finding the jacketing from 9mm, 5.56, and 7.62x39 gets completely locked into the frag coating of our plates. Only after about 65-75 rounds did the coating start ripping up. so again from my experience yes it helps.
@@TacticonArmament Is there an internal strap to hold the 8x10 plates up against the top of the carrier? Or would they be swimming around and against the bottom?
@@TacticonArmament So, I ask a serious question and get a wise-ass reply. You must not want me to take you seriously and buy anything from you, huh? Because that's the way to make sure I don't.
Why would you take a step backwards by removing the more modern hook and loop ONLY cummerbund? And why won't you tackle the topic of stitching on your products? You have some of the lowest quality stitching on the market, despite having prices higher even than like Condor Outdoor, who are arguably higher quality, which is REALLY saying something.
@@marknemeth539 untie the knot on the elastic paracord on the back of the carrier and weave it vertically back through the MOLLE closer to the outside of the plate carrier. This will give you several more inches... and we could all use a few more inches 😉
Just ordered mine tonight THEN watched this video. I feel super confident in my purchase and will definitely keep up with this company.🇺🇸
Rock on! this vest slaps
How do you like it?
I literally did the same thing just now. A year apart from you. 197.00 on sale
Mine comes tomorrow or Saturday same color
@@neverender216when did u order urs and how long did it take for urs to arrive
I love how transparent and honest this company is. You know exactly what you're getting for the price you're paying. It's perfect for most civilian use and nobody needs a 1k+ armor setup unless you're a real warfighter. Plus you're supporting veterans as an added bonus
Who TF are you to tell people what they need? Go be poor somewhere else.
I ordered this in the bundle day the sale went out. Also ordered the additional 3 mag pouch. So now this runs 6 mags on front and couldn't be happier. Combined with the V1 battle belt, I've got a really well put together system. If your running on a budget, this is a great system. It's a budget cost system but far exceeds what others are in budget quality, this is top notch stuff.
Happy to hear it brother! Rock on!
Bought mine at launch, and it’s safe to sayI have put mine through it’s paces (through several milsim events) and it’s holding up very well. Say what you will of airsofters, but I’ve probably spent more time crawling, running, and abusing this thing than most and it’s taken everything in stride. Highly recommended.
I finally got an email informing its back in stock. I ordered one in FDE, SAPI cut for 10”x12” plates and a set of trauma pads for $189.00 shipped! Thanks Jake! 👊🏼
Awesome! 🔥
After a lot of research, I bought a Tacticon molle rifle bag for my Zastava AK earlier this year. Tough, plenty of pouches for mags and accessories and the built in shoulder straps feature for carrying on my back is great. Absolutely love it. Wanted a chest rig or plate carrier for AK mags. Bought a chest rig from another manufacturer and wasn't really happy with it. I wanted a true plate carrier and went back to Tacticon when I discovered they made the V2. I'm not ex-military or LEO so I'm not an expert, but from my experience the fit and features of the V2 are amazing, especially at this price. Just check out the plate carrier pricing from other companies. I just needed to re-knot and lengthen the pull tabs for AK mags and adjust the shoulder straps, but those were the only adjustments I needed to make. This a fantastic company that knows what sport shooters need and they offer a well built product at a fantastic price. Very helpful vid as well. Kudos to the team at Tacticon!
Hey Steve! Thank you so much! Appreciate the review!
I have been looks for a rifle bag like that for my 16 inch AR rifle. Will a 16 inch AR15 fit ?
@@danielmackormack8524 Yes sir! You can get the 36-in bag to accommodate the 16-in AR or you can get the 42-in bag if you plan on putting a larger rifle in with it down the road. It's a double rifle bag so It will comfortably hold two rifles but isn't any bigger than a single rifle bag believe it or not
Awesome videos I've bought 2 of your belts and use them for my job and thank you. You guys made it easy for me to support my family.
Excellent vest! I got mine a while back and the fact it fits AK mags is awesome 👌 well built!
Right on! Thank you!
You've got my support. I've bought two battle belts and carriers from Tacticon before. Please, take my money.
We appreciate the loyalty and trust in us my friend!
I just ordered one to change out of my old one I have to this. Thanks. You guys ROCK
$150 with 2 NIJ Certified Level III+ Plates INCLUDED. Get it here: tacticon.com/product/battlevest-v2-w-2-ar500-plates-combo/
Snagged that deal! Can't wait for my coupon to come in!
Damn. Wish this deal was still on for plates.
Great job "Goober" Guy.. Great looking product ..I am definitely in Brother..put my others (3) to shame and straight into storage.. Be Safe & Be Vigilant...Peace Out✌️
Thanks man! 🤘🏼
Bought one of these and the lite. Wasn't a big fan of the lite at first but has grown on me. Use it for the range. The V2 is def more comfortable with the plates on and like Nolan said, really good balance
I like the bungee that you can replace like this vest has. The problem with elastic is that when it's exposed to the elements, over time it can become brittle and lose it's elasticity. When the elastic portions of the cummerbund are sewn into the vest, well you'll have a hard time replacing it, but when the cummerbund uses bungee such as this one, which can be replaced for literally pennies, that allows you to have an elastic cummerbund that will last for the whole life of the vest.
I bought this to play Airsoft and it is great and it fit me very well I am 13 years old height 5,3 and I am skinny I would definitely recommend this product
Tacticon Armament is freakin legit. Thanks, boys. Love my Battle Vest.
Great stuff keep bringing us more of these freedom full of content.
I just got my vest, battle belt, tq and tq holder, and mag pouches all amazing quality
This vest is excellent, and you can't beat the price.
Thank you!
Lol. You do a great job at keeping it interesting and entertaining.
Appreciated!
Got this just to have with soft armor and to use as a magazine carrier. I have your 3x magnifier and a eotec for the money yours isn't half bad and is better than my Sig Juliet even.
I just got mine, for the half off or 40% off coupon its not a bad deal. I looked it over and over all it was alright for what your getting. Few minor things where had to burn away a ton of nylon frays that where all around it,for something mass produced I was kind of expecting that. Only other problem their was a pair of the molle rows in the back where the cummerbund weves in that the threads had come undone. I honestly did not wanna do a return so, a quick five min on the sewing machine fixed it, yea probably violated the warranty but whatever easy fix. For what it is its not bad for what your getting if your looking for some entry level gear on the sale price. I mainly got it out of curiosity or as a throw your buddy to try out, maybe add some padded shoulder straps for heavier plates and your kind of solid.
at the end when you talked about crafting your own gear i am a big proponent of that
thank you sir, more to come.
I love how quality it is yet so cheap
I dig it. KISS, Keep it simple stupid. I'm all about the minimal. I resonate with flip flops. Comfortable and rigid, both at the same time.
That ponytail though😍
Not just a ponytail, a BBBTP,......Bad Boy Broski Tactical Ponytail! :)
I purchased 2 battle vest lite and 2 battle vest v2 plate carrier’s extremely happy with all 4 plate carriers
Rock on brother!
I don’t know why I’m excited, I already own one and just got another. Same thing, different color. Keep coming back because the quality is there.
Fits 2x 308 mags in the pocket great. Ditch the flag and get a shotgun card 😮
Could you do a more in-depth video about the plate carrier lite please
Yes. Yes I can.
Just got a few things from tacticon including this vest. I'm honestly very impressed with the quality.
Jake. Keep feeding this guy. And the Vest looks pretty cool too
Thank you brother.
Yeah, he looks like he needs a couple sandwiches. His tape worm is working over time.
@@peterlogan2105 It's just all the eco-friendly bamboo filled low-carbon footprint vegan non-GMO gluten-free food we've got out here in the Communist Republic of California.
I bought the carrier itself, and I'm a smaller guy. But I love it so far.
For a first time vest user I learnt a few things,
I bought the BattleVest Lite Plate Carrier which is more expensive than this one and 500 D nylon, I have not receive it yet but seems like there is no mag carriers. What is the difference between this BV2-REG-BK BATTLE VEST V2 and my SKU: BV-LT-MB ??
Ty
Bought a battle belt best purchase iv made 🔥
Thank you!
Subscribed👌🏽 this is great!
It’s the best 49.00 I’ve spent in a long time!
You said 500D but your web site lists the material as "900D nylon". Which is it?
A suggestion, the molle webbing is bar tacked but the shoulder straps aren't. Perhaps consider bar tacking where the straps meet the plate bags as well.
I bought one on your Amazon promotion and liked it. After checking that it would adjust down to fit my 4'10"/105lb wife I picked up a second for her.
noted brother, we are always open to input for our next production run. Thanks for the comment.
i wanted a vest/plates mainly for training. i was looking at 5.11 and rogue and i was able to get the tacticon bundle for less than it would have been to basic weight plates and an equivalent vest. and it stops bullets
Is the front placard/admin pouch removable?
5:41 made me make the purchase 😂
😂🤘🏼
Just purchased one. Looking forward.
Let us know what ya think my friend!
I think I really want one for going on runs.
I got mine and love it!!! But definitely want lighter plates!!! Help a brother out
The cummerbund is held on by shock cord? So if the little knot comes undone like it did in this vid on the mag pouch the cummerbund will fall off??
Held together by elastic Paracord. When constant pressure is applied to the knot with the stretch of the woven Paracord, Then it completely disables any possibility for the knot to be disassembled or to come undone.
I was waiting on a backflip or handstand but I didnt get one
I'm sorry to let you down. ill give you something next video
How wide exactly is the Velcro admin pouch
So, how thick of plates can it handle? Does .08" thick ceramic plates fit?
it can accommodate up to 1.3" thick plates. PLENTY of room while still giving you internal retention straps to keep it in place. Thanks for the question!
Can you use the cummerbund quick release on this vest?
Would be nice if you guys have a swimmer cut plates and carrier ls also 😊
Can you put the quick release system on it?
Love this company.
We heart you too brother!
Does it shine like a beacon under nods?
@tacticonarmament will this fit for larger guys? I wear a 2xl. 6”3 270 pounds
you'd probably want an XL SAPI plate and these only do 10x12 just a hint smaller than a large SAPI Plate.
Just ordered one off your website also purchased trauma pads for it. It didn’t give me any tracking information or email about it so I’m wondering how long it would take to deliver
Hey brother sorry you didn't receive any info yet! Reach out to customer service with your order number and they will get you sorted
I bought one at a gun show. 250 for 2 AR500 STEEL PLATES AND THAT CARRIER . I Think it's a deal. 😊
I paid 150 for the same setup from them
Thank you for reminding us that we all look good lmao and honestly you sold me with thia video. I'm gonna need a multicam one ASAP.
Update: Got a Ranger Green one instead and love it.
I just seen another product of your guys it was another plate carrier how did you guys get away with perfectly copying the agilite k19 plate carrier and I'm wondering where you guys cut Corners to get the cost down so low?
Good question. Here's the rub.
We start development on a product with a baseline in mind. A carrier that's already tried and true and well-reviewed. We dig deep into the bowels of the internet to find the NEGATIVE feedback (even on the k19), then we fix all the small issues that the product has.
BOOM... the perfect carrier.
Without the need to spend $100k on R&D and simply fix a few things on existing products, manufacture them in insanely high quantities, AND sell them in high volume (and just fundamentally not get greedy with our margins like all these other companies are) we are able to sell them at often 1/3 of the price and still standing by our LIFETIME WARRANTY.
Thus... leaving our R&D budget wide open to develop the worlds most innovate armor... which... we do. We only have so many units of energy to devote to true innovation so we put that into our lifesaving armor technology.
Hope that helps explain some things my friend!
Does a 10x12 CURVED plate fit this?
Cool! Can you also do a video on your plate carrier vest??
I will pass this on to the team!
Great piece of equipment! 🇺🇲
What size plate fits best
Do you guys have a swimmer cut version of the plate carrier?
The BattleVest V2 will accommodate swimmer cut plates! We are currently offering a bundle deal with SAPI cut plates!
Do the trauma pads add comfort?
Yes they add a bit of comfort between you and the plates, as well as help with shock absorption
Does the 500D Nylon protect against fragmentation ?
great question! From my testing and experience yes. This is Nolan here, I don't have combat experience. That being said I have shot quite a few of our plates inside of the carriers. From my finding the jacketing from 9mm, 5.56, and 7.62x39 gets completely locked into the frag coating of our plates. Only after about 65-75 rounds did the coating start ripping up. so again from my experience yes it helps.
Are there plates included?
Feed that guy Jake !!
can't do it! He puts the lotion on the skin or he gets the hose again! lol
@@TacticonArmament To Funny
just ordered mine only 4 payments 👍
Just got this for 41.26 shipping included
What are the little clips for on the sides? I have a vest for myself and can’t figure out what they are for
for clipping... the ultimate of clippers
But in all seriousness, not sure what ya mean. Contact our CS at 916-538-6205 to learn more my friend
I was curious myself … what the plastic buckles are for 2 in the front one in the back on both sides
can you use side plates with this vest?
yes
Looks cool.
As a bigger guy, 5”11 270, how would this fit?
Just right
Seems like snake oil but I can’t say without trying it so I bought one and I’ll be doing a review soon
Let us know what you think brother! Looking forward to your input so we can improve anything on our second production run.
i just ordered one with the plates but didn't let me add the trauma pads :(
Hey Ariel! I checked on this for you and our customer service team said they will be reaching out to you to help fix this.
Does this support danglers?
You can put a danger on this yes
Nice got one in my cart....oh yea your pretty funny dude 😆 Lmao....
Hey, thanks!
I have a battle vest2 with level 3a plates
Noice!
ordering mine as soon as my dad gets home along with foam plates to hold the carriers shape until i can afford level 4 plate
You're out of inventory and i added my contact info to get notified when the plate carrier is back in stock.
Are there available for big and tall I'm 290 pounds
BattleVest V1 my friend! Fits up to 3XL
How does 8x10 fit
It will fit! The max it will hold is 10x12 so you’ll have some room!
@@TacticonArmament Is there an internal strap to hold the 8x10 plates up against the top of the carrier? Or would they be swimming around and against the bottom?
@@TheMattMoy Yes, there is an internal retention strap to hold any size plate securely inside the torso pockets.
what placard is that??? shown on 7:25
That's our Tacticon BattleGear Elite Chest Rig. He's using the prototype in the video. The product will launch in November for about $30/unit.
@@TacticonArmament Will it come in Multicam Color?
Just got one,
Ordered one for my girlfriend, then watched this video and ordered one for myself 😂
Buying one today!
Check out the bundle deal we have right now! BattleVest V2 & two AR500 plates for $150!! tacticon.com/product/battlevest-v2-w-2-ar500-plates-combo/
@@TacticonArmament I got put off a day but that's the deal I'm grabbin. Are there any camo ones???
Unfortunately, we are out of stock in camo! But all 5 other colors are still available!
@@TacticonArmament Thanks.
Gonna cut the integrated mag pouch off
What's an "ouch pouch?"
A pouch for ouchies
@@TacticonArmament So, I ask a serious question and get a wise-ass reply. You must not want me to take you seriously and buy anything from you, huh? Because that's the way to make sure I don't.
It’s a first aid kit. A pouch for ouchies.
@@TacticonArmament Now was that so hard?
If you can't put together what an ouch pouch is I'm sure they could care less about selling to you. Lol
Here's a comment for the comment section down below.
My yard cat needs one
You're yard cat must be a Navy Seal
Pinky up!
Why would you take a step backwards by removing the more modern hook and loop ONLY cummerbund? And why won't you tackle the topic of stitching on your products? You have some of the lowest quality stitching on the market, despite having prices higher even than like Condor Outdoor, who are arguably higher quality, which is REALLY saying something.
Country of manufacture?
North korea
Is it 1 size fits all?
Hi Mark, we have different sizes available. There is a size chart available on the listing. a.co/d/3AZ195a
I have got the v2 carrier...but the cummerbund is tight...im about 220.how can I adjust it in the back...
Love the carrier just need more room on the bun...ideas
@@marknemeth539 untie the knot on the elastic paracord on the back of the carrier and weave it vertically back through the MOLLE closer to the outside of the plate carrier. This will give you several more inches... and we could all use a few more inches 😉
Broski!
A Garand Thumb fan, are you?
who isn't!?
How neat it that😂
Are these made in the USA?
WANT
I only buy gear from TA. Had a Haley rig once. Never again
How tall are you looks small
6'2" but it covers all vitals as it's supposed to.