In the meantime you can get a ferro wingthing and mount the smoke grenade pouch of your choice on it. I think agilite and other companies make similar products to the wingthing but I don't have any hands on experience with them.
A couple tips I have... 1) If your carrier has molle on the back, I am a huge fan of running a remote cable for my radio antenna. Antennas run off of line of sight and running my antenna off my back gets the antenna a little higher and doesn't impede the movement of my one arm. 2) I am a huge fan of running my IFAK from a dangler pouch off of my rear plate bag. The catch is that the IFAK has to have an ambi draw mechanism like the new Agilite med pouch or the Ferro Concepts Roll med pouch. It is still very accessible but out of the way and I find it adds lumbar support while sitting.
This has nothing to do with you professionals, but as a civilian that enjoys the modern martial art and getting out in the boonies with buddies for training, "keep it one layer" is some of the only advice I 100% know I can give somebody just getting set up. Lots of folks want to load up with stuff that will be moved the next time they use their kit, and would be absolutely horrible in hot situations. Spreading things around so you're somewhat slick and can get as low as possible really beats getting hung up on every snaggy obstacle (and equipment etc) and most importantly hitting the dirt only to lay on top of a pile of gear. Buddy pack strategy is my other favorite. Especially with small attached packs that hold your bladder and some goodies - everybody in your squad should have a somewhat uniform set of items in there. A couple spare mags, an extra loose dressing, energy gel, light sticks, little spare battery holder - whatever it is, there should be a compact assortment of stuff everyone will need. Team contract settles what it is and where it goes. Man I'm grateful I'll never actually have to use this stuff - I'm bad at it, but it's challenging and compelling.
Been wearing kit since 06. My biggest thing I noticed about new operators is too much gear. They want to wear a ton of cool stuff but quickly become too heavy. Be fast and light. Let your training dictate movement and control your battle spaces.
Everyone Shout Levi, on these tips and tricks… very informative. I would like to add one tip, if your carrying heavy plates or a lot of added weight make sure carrier is properly secured and tightly secured but not so tight you can’t breathe this will reduce the tension on your shoulders during hard use.
Minor gripe, I wish the K19 had the number sizing system on its straps too, I think that should be a standard for all PCs imo. And if u make the grenade pouch I hope it can fit either smoke or flashbangers 👍
From my point of view, if I should choose one item that is not already in the Agilite production list, that should be a collapsible dump pouch. As a mention, with this new item, my Magnetix belt will be complete. All my combat/war setup (PC and belt) are Agilite in this very moment but the dump puch that I have is made by one of your competitor. :)From my point of view, if I should choose one item that is not already in the Agilite production list, that should be a collapsible dump pouch.
Smoke pouch is an awesome idea! Just maybe have some sort of a latch that can be pulled to pull it out or have some kind of band in the bottom so it won't slip out💪🏻
cumber bund is derived from Farsi language. Cumber( کمر kamar) in Farsi means waist and bund ( بند band ) in Farsi means bounded or fixed (so fixed or bounded to waist). This word is also used for Belt.
If you get QD cummerbund and need another pouch for some reason (I hate that on CIRAS.) Just use inner pouches with velcro to get addtional pouches bothj sides always cuz its on front pc and use QD on both sides.
Defense mechanisms make great cummerbunds that solve the problem of the loss of molle. I use them with my K19 and it’s great ! Agilite should take a look at it for their next Cummerbund 😀 (Also Shaw concepts use the same system but with a different rear attachment system)
you guys should design a plate carrier backpack that has a QD so that you can get to it with out taking off the vest but also a easy way to put it back on with out taking it off, similar to your battle belt design
I improvised a similar smoke grenade hanger for my K19, in Gaza as well. I would suggest that you add an elastic band on top, so it wont slip out from a hit/bump on the bottom. The elastic band can be mpved easily and take the grenade out. Usuallywith smoke grenadesyou have that extra 1 sec to do so (vs frag). If you do use this hack, maybe kit my team with them ;)
Smoke holder initiated...i say yes. maybe two styles. one without flap. think urban/cqb. one with flap, think airborne/amphib ops. drain hole or slot bottom. snap or buckle fasteners. small web loop for dummy cording item not of pyrotechnic design close to opening.
Great Hacks Hevre, You know the say: Equipment is never enough, Just Designs and Better Fabrics and Quality changes with new Ideas which comes Under Fire situations. I like your Gear and must have some. Why you dont do Video about Combat Uniforms of IDF Tier Forces? Smoke Grande Pouch is always good...
Like the idea of a the smoke hanger pouch, if you do put it in to production is there any chance you can add slots in the Velcro so you can thread the Cumber band QD mounts you find on the kzero through ?
Any idea on when you guys may do just a chest rig setup? Would love to have a chest rig with a pincer placard and a few pouches for at the home rapid deployment to where I don't have to throw on my plate carrier but still have the extra mags etc. Just in case a poor soul wants to invite himself into my home! Any input on this would be great thanks!
![J.P., NLE Choppa - Bad Bitty (Remix) [Official Music Video]](http://i.ytimg.com/vi/rBDa6BCvw10/mqdefault.jpg)
The smoke grenade pouch is great! Please launch this commercially.
I 2nd this motion ✊🏽
But we need smoke grenades
There's a really similar product by helikon tex and it works great for tqs also
Other punches are external only this would be so amazing
Definitely manufacture that smoke hanger pouch.
Would be huge and get it off the belt or taking up space on the outside of the cummerbund
In the meantime you can get a ferro wingthing and mount the smoke grenade pouch of your choice on it. I think agilite and other companies make similar products to the wingthing but I don't have any hands on experience with them.
A couple tips I have...
1) If your carrier has molle on the back, I am a huge fan of running a remote cable for my radio antenna. Antennas run off of line of sight and running my antenna off my back gets the antenna a little higher and doesn't impede the movement of my one arm.
2) I am a huge fan of running my IFAK from a dangler pouch off of my rear plate bag. The catch is that the IFAK has to have an ambi draw mechanism like the new Agilite med pouch or the Ferro Concepts Roll med pouch. It is still very accessible but out of the way and I find it adds lumbar support while sitting.
This has nothing to do with you professionals, but as a civilian that enjoys the modern martial art and getting out in the boonies with buddies for training, "keep it one layer" is some of the only advice I 100% know I can give somebody just getting set up. Lots of folks want to load up with stuff that will be moved the next time they use their kit, and would be absolutely horrible in hot situations. Spreading things around so you're somewhat slick and can get as low as possible really beats getting hung up on every snaggy obstacle (and equipment etc) and most importantly hitting the dirt only to lay on top of a pile of gear.
Buddy pack strategy is my other favorite. Especially with small attached packs that hold your bladder and some goodies - everybody in your squad should have a somewhat uniform set of items in there. A couple spare mags, an extra loose dressing, energy gel, light sticks, little spare battery holder - whatever it is, there should be a compact assortment of stuff everyone will need. Team contract settles what it is and where it goes.
Man I'm grateful I'll never actually have to use this stuff - I'm bad at it, but it's challenging and compelling.
Definitely manufacture that smoke hanger pouch but I prefer dimension to accommodate and flash-bang too.
im defiantly going to run the one side QD now, it just blew my mind how ive never thought about that.
Love the smoke grenade idea!!
Been wearing kit since 06. My biggest thing I noticed about new operators is too much gear. They want to wear a ton of cool stuff but quickly become too heavy. Be fast and light. Let your training dictate movement and control your battle spaces.
Everyone Shout Levi, on these tips and tricks… very informative. I would like to add one tip, if your carrying heavy plates or a lot of added weight make sure carrier is properly secured and tightly secured but not so tight you can’t breathe this will reduce the tension on your shoulders during hard use.
The smoke pouch is a good looking bit of kit.
I like that its elasticated so could be unitised for other uses if needs be.
Minor gripe, I wish the K19 had the number sizing system on its straps too, I think that should be a standard for all PCs imo. And if u make the grenade pouch I hope it can fit either smoke or flashbangers 👍
Smoke cover does not make, Concealment it is. - Yoda
Just have to point out it's the C7 vertebrae, T7 is lower.
Great tips, great gear, great work 👍
Great tips and yes definitely on the smoke grenade pouch!
Thanks for tips. For the prototype make it elastic with a retention systepe at the bottom ! 👌
Great tips and plate carrier education Lev! Straight from the battle field!
Definitely make that smoke pouch. The market for support grenade pouches is way too small and you guys make awesome stuff
Never thought about the weak side still using Velcro to use that space.
So informative, thanks Lev and guys!
Thanks for the tips Lev! Yes, definitely manufacture a smoke grenade pouch🤙
Always great info/reminders from Agilite!
From my point of view, if I should choose one item that is not already in the Agilite production list, that should be a collapsible dump pouch.
As a mention, with this new item, my Magnetix belt will be complete. All my combat/war setup (PC and belt) are Agilite in this very moment but the dump puch that I have is made by one of your competitor. :)From my point of view, if I should choose one item that is not already in the Agilite production list, that should be a collapsible dump pouch.
Love the QD hack on just one side!! Gotta test it out!
Great tips -- and it's a yes from me on the smoke grenade pouch (and flash bang would be nice).
You guys make the best gear I’ve ever got my hands on!
one side QD is a very good one!
Useful tips and tricks for a plate carrier. You should definitely make a grenade pouch but make it adjustable for different grenade sizes.🤙
Putting the mag that’s on the side cummerbund upside down, held with a retention tab, for a quicker and easier draw
Cringe
אני אוהב אתכם!
תודה לכם על העבודה המדהימה שאתם עושים
Great knowledge and tricks as always! Thanks, and yes to the hanger!
Love the smoke grenade pouch!
Make a video on the differences between the k zero and k19 and what each one is for
They did
I got you
ruclips.net/video/hla8y062y94/видео.html&pp=ygUOazE5IHZzIGsgemVybyA%3D
Amazing video as usual!
That's a firm YES on the smoke holder!
I’ve been using pouches for a water bottle up front. The smoke grenade pouch is a great idea.
Love your gear, and videos. Semper Fi Guys
Great content as always!!! Need this smoke grenade, asap!
I say let’s make the smoke grenade pouch!!! Also the QD and Velcro combo is something I’ll be testing out!
Smoke pouch is an awesome idea! Just maybe have some sort of a latch that can be pulled to pull it out or have some kind of band in the bottom so it won't slip out💪🏻
Got one k19, awesome product, hight level 👌🏼
Yall are awesome! love
Another very informative vid! Thanks for sharing your experiences. Oh, and release that smoke grenade pouch!
YES...please make that smoke carrier...possibly with an adjustment strap other than the stretch fabric.
yes. 1000% a GO on that smoke grenade pouch.
Definitely turn out the smoke pouch for commercial production.
Definitely make the smoke grenade pouch.
I'd love for you to make the smoke hanger pouch, definitely very much needed.
I’d love to try the smoke grenade. It’d be great for flashbangs
Great video!
Yes on the smoke grenade holder please!
cumber bund is derived from Farsi language. Cumber( کمر kamar) in Farsi means waist and bund ( بند band ) in Farsi means bounded or fixed (so fixed or bounded to waist). This word is also used for Belt.
Yes, please make the smoke pouch!!
Mount an additional Tourniquet to the stock of your Longrifle, so you always have verry easy acces.
Nice hacks! And that smoke grenade pouch is just the missing piece of gear that my unit needs. Build it and sell it Lev!
A Molle side wing would be sick
Yes on the smoke grenade carrier please.
If you get QD cummerbund and need another pouch for some reason (I hate that on CIRAS.) Just use inner pouches with velcro to get addtional pouches bothj sides always cuz its on front pc and use QD on both sides.
Definitely produce the simple "smoke" pouch!
Smoke grenade hanger would be dope
Please make the Smoke Grenade Hangar! Thanks :D
I wouldn’t mind seeing a Agilite Grenade Pouch in general
@@zwelch1662 Agreed a Grenade Pouch in general would be nice to see
Definitely produce the smoke pouch!
smoke hanger is a good idea, only issue is the location id put it i run a mag. I'm sure i could find a spot though :)
Would like to see the smoke grenade pouch!
Smoke provides concealment, not cover. Also smoke hanger is a dope idea #testteam5
"All stations standby - Smoke pouch needs to happen: now - now - now" 🤘🤘🤘🤘🤘🤘🤘
Defense mechanisms make great cummerbunds that solve the problem of the loss of molle. I use them with my K19 and it’s great !
Agilite should take a look at it for their next Cummerbund 😀
(Also Shaw concepts use the same system but with a different rear attachment system)
Yes, please make something for Smoke Grenades and Stun Grenades
you guys should design a plate carrier backpack that has a QD so that you can get to it with out taking off the vest but also a easy way to put it back on with out taking it off, similar to your battle belt design
Yes 1000% to smoke grenade pouch. I’ve been using a double mag pouch as a make shift and it works but isn’t great.
Smoke Grenade Pouch- YES
Make the smoke grenade pouch!!😊
thanks very usefull
good stuff
I improvised a similar smoke grenade hanger for my K19, in Gaza as well. I would suggest that you add an elastic band on top, so it wont slip out from a hit/bump on the bottom.
The elastic band can be mpved easily and take the grenade out.
Usuallywith smoke grenadesyou have that extra 1 sec to do so (vs frag).
If you do use this hack, maybe kit my team with them ;)
Ok real talk make that smoke grenade hanger and get we get flashbang hangers too
I’d love to get my hand on that grenade pouch
I would definitly buy that smoke grenade pouch but I would put a water bottle in it to stay hydrated
I would love a smoke dangler if I can fir a 16oz redbull in it lol
Thanks
Also a radio pouch!
A smoke grenade hanger is useful but it would be better as a front attachment for me.
So U don't accidentally discharge it.
Make those smoke hangers
Definitely make the smoke grenade pouch
Smoke holder initiated...i say yes. maybe two styles. one without flap. think urban/cqb. one with flap, think airborne/amphib ops. drain hole or slot bottom. snap or buckle fasteners. small web loop for dummy cording item not of pyrotechnic design close to opening.
Great Hacks Hevre, You know the say: Equipment is never enough, Just Designs and Better Fabrics and Quality changes with new Ideas which comes Under Fire situations. I like your Gear and must have some. Why you dont do Video about Combat Uniforms of IDF Tier Forces? Smoke Grande Pouch is always good...
Prayers and support for Israel, stay safe brother. Godspeed.
merci
I say yes to the smoke grenade pouch
Like the idea of a the smoke hanger pouch, if you do put it in to production is there any chance you can add slots in the Velcro so you can thread the Cumber band QD mounts you find on the kzero through ?
Yes make the smoke grenade pouch and no smoke does NOT provide any cover, it provides concealment. Bullets go through smoke my guy.
True but he said "soft cover" and that's what that means
I would love to see the MC Tropic color in K-Zero and accessories as it is a Nordic + UK color
Make the smoke carrier for the commercial market.
SG...yes. Do it.
Any idea on when you guys may do just a chest rig setup? Would love to have a chest rig with a pincer placard and a few pouches for at the home rapid deployment to where I don't have to throw on my plate carrier but still have the extra mags etc. Just in case a poor soul wants to invite himself into my home! Any input on this would be great thanks!
I'd buy the smoke grenade pouch
Definitely interested in the smoke hanger!! Would this be adjustable for different sizes or FSDDs?
Make the smoke grenade pouch hanger into an actual product !!!!
Yes make it. Grade Tips i try it.
Yes make the smoke grenade. Im just going to buy it like i bought everything else Agilite😊
Wish I had the resources to prep myself one for emergency