You bet gdubbs! So glad we could help out. We have a great video on sizing your print (using a text example) here: ruclips.net/video/USBAQ6ulrmE/видео.html
Thanks Paul! Left chest print locations are the source of frustration for many decorators just starting out, so we wanted a resource that helps make print placement as accurate and easy as possible!
I’ve had Transfer Express on my radar for quite some time now. I find the videos to be helpful and I’m feeling pretty confident to place my first order sooner rather than later.
Thanks Lou, we're always happy to help out however we can, be it heat printing education & resources, apparel trends or small business tips. If you have any specific questions we're right here to answer them 👍
Thanks, We're always happy to help apparel decorators out- Especially with tricky placements like these left chest prints (That aren't actually so tricky) ;)
I really love this video. I went to your website to look at ordering some DTF prints from your company and was unpleasantly surprised to find that you have a 50 minimum. I'm small business and print one shirt with one design here and there. Unless I get a sports team or something, 50 is a bit much. Guess I will stick with who I use now
Thanks Trish! While we carry a variety of different heat transfer types, our DTF Transfers (UltraColor Max: www.transferexpress.com/heat-applied-transfers/ultracolor-max ) are available in any quantity, there is no minimum. You may have had our single-image screen printed transfers selected, which are made for lower costs on more bulk-production runs and do have a 50 quantity minimum. Our UltraColor Max DTF Transfers can be ordered in any size from .25 x .25" all the way up to 22 x 22" and start at just 6 cents per square inch for very low costs in any quantity.
I’ve seen so many operators who just don’t take the time to evaluate the garment accurately. There’s nothing worse than a low left print on shirts for women’s groups.
Can you guys do a video on where and how to do a back Hoodie & Crewneck placement ? Also how large can a back dtf design can go as I want to add a large back piece to fill the back of Hoodie’s and Crewneck Thanks Willie
That’s a great suggestion Willie! While we’re working on it, you can check out the print placement on the back of hoodies that we cover in this video right around 14 minutes: ruclips.net/video/dwRFRT2iyFw/видео.htmlsi=iBRkvBazs00qLf6q As for sizing, on adult sizes you can pretty safely print 13” w x 17”h or larger on the back for a big full back print.
Great question Jack! Unfortunately, we're not going to be in Cincinnati this year, but we will be in Indianapolis Oct 3-4th at the Graphic Pro Expo. You can see all of upcoming in-person & virtual events here: www.transferexpress.com/events-schedule
I have the same shirts, same brand, same size. I fold my shirts in half an press the center line (to later add a back design), then I find where the collar meets the shoulder and place my LEFT chest logo. Each shirt comes out different. Some logos are closer to the center line than others. Am I doing something wrong ? Is this normal? OR should I press the center line for each shirt and place the LEFT chest logo at the same distance from the center?
Thanks so much .. I have searched high and low to get this explanation .. i am using print on demand so I have to do it all on the computer .. do you do print on demand at all?
Yes, a few different ways. We do offer print on demand services through STAHLS' Fulfill Engine, essentially just set up products to sell online (even integrated with Shopify) and push production and fulfillment out to a vendor (print shop) that will fulfill your apparel orders for you. Learn more at fulfillengine.com Additionally, we also offer the backend of that software for decorators or brands looking to produce in-house for higher profit margins compared to outsourcing for print on demand. With heat transfers (like the Goof Proof screen printed transfer or the Ultracolor Max direct to film heat transfers we use in this video) it's easier and a lower investment into equipment than ever before. No need for the risk of expensive bulk printing runs or stocked pre-printed inventory, order what you need when you need it, and produce when the order comes in. You can learn more about that software and the benefits here: www.stahls.com/fulfill-engine We have a video showing that process of printing on demand with a heat press a little bit here: ruclips.net/video/Ja4vXMgaaOU/видео.html
You're in the right spot! We have a great video on printing hoodies here: ruclips.net/video/qqpjz8fREOc/видео.html As well as a video about the right transfers to use for printing photographs on apparel: ruclips.net/video/eHTV_Kf1eIY/видео.html
Can pls explain again with spacing for 4in or 4.5in round logo print. Include image with crosshair where should we make sure is correctly alligned for polo shirt. Thanks @transferexpress
For a round image, I would recommend a graphic closer to 3.75"-4" as 4.5" can look a little large for a left chest with circle or square graphics. We can't provide an image in the comments section here, but we have some placement guidelines here, as they do differ with the size of the garment: blog.transferexpress.com/left-chest-shirt-printing-placement/ Additionally, in our print placement and positioning video, we show a left chest placement on a polo: ruclips.net/video/dwRFRT2iyFw/видео.html
I have a design that the length is 6.78 but the height 4.0. No matter what size I bring it to the length makes it a challenge. I don't want it to be small because of the length. How should I measure it for a left chess placement.
Hi Brady- Scaled to 4 x 2.37" would be a great size for an adult left chest print. Anywhere in the 3.5 - 4" wide range would size perfectly to the print location. The only thing that's worth double checking is that any small details or lines still meet print minimums.
Great question! It would be just slightly lower: this is where checking the placement against the sleeve like we show at 03:20 here would confirm the correct placement.
We have our placement rulers available in our Application Kit: www.transferexpress.com/heat-press-accessories/application-kit The kit also includes some very helpful heat printing tools: A mousepad for raising print areas, temperature test strips, a pack of cover sheets, application guides, $10 account credit and a t-shirt pre-printed with standard print sizing and placements!
Great question! With proper loading of the garment onto heat press you can line it up to the edges of the platen (just like we did for the Palm Bay text graphic we show at 5:58 for a straight placement). However, with smaller platen sizes it can be tricky to ensure the garment is straight, so you can lay it flat on a table to place the graphic straight, then tape it down, similar to how we show it at 4:16 in this video (just we show it on a mannequin). Using a technique like we show in this placement in positioning video ( ruclips.net/video/dwRFRT2iyFw/видео.html ) you'll see we find the center of the transfer and then crease it at the top and bottom- Ensure those creases line up with the centerline of your left chest placement and it'll be perfectly placed, nice and straight! Alternatively, just like with the placement guide we use in this video at 5:36, you can align your graphic to the bottom edge (or if the transfer carrier is cut straight you can align to that too) when aligned to the collar and the shoulder seams. Hope this helps!
While we do not provide drop shipped decorated apparel or transfers, you can find drop shipping solutions from a network of decorators using www.stahls.com/fulfill-engine
learned nothing. nothing here is efficient and systematic. I think the best way would be to print a template for employees to follow. I think you are speaking to people who make shirts with dtf as a hobby
You aren’t going to be a pro at anything done for the first time. T shirt pressing works as you get a feel for it overtime. This video is spot on for finding where to place a logo. once you get good, you become efficient. Then you won’t even need a centerline as you can eyeball it and get it perfect every time.
![Lethal Company Music Video 🎵 "Follow The Orders" [VERSION A]](http://i.ytimg.com/vi/QeooZB4Z7RA/mqdefault.jpg)
Dave, if no one has told you this today, "YOU ARE THE MAN!!!!"
Thanks Christopher- I'm so happy I can help other decorators and entrepreneurs succeed! 😁 This comment made my day!
Exactly what I needed. Straight and to the point. Cheers!
Cheers! We're so happy we could help out!
The best explanation I've seen in years. Thank you.
We're so happy we could help out!
I have lost many shirts to the cursed left chest print 😅 but I learned the hard way and now we’re good lol.
Hahaha I'm with you Joshua! I too learned the hard way many years ago and want to help as many decorators avoid the same mistakes I did! 😆
Just did my first left chest placement order and used this video as reference! thank you so much!
Thanks Nick, We’re so happy we could help! Did they turn out spot on? 🙌
Thank you for the simple how to guide for those of us doing a diy shirt at home!
Absolutely Dennise! We're always happy to help apparel decorators both big and small
Thank you for the video and explaining step by step and straight to the point.
Thank you!! I will screen print and this explanation was very helpful!!!
Awesome, we're always happy to help out!
Super informative and to the point. Thanks!! Just the video I was looking for.
Thanks Emily! We're so happy we could help out!
Omg this helped so much i have been struggling with this. Do you have a video for sizing wording on a shirt.
You bet gdubbs! So glad we could help out. We have a great video on sizing your print (using a text example) here: ruclips.net/video/USBAQ6ulrmE/видео.html
Thank you for the video. You do a wonderful job explaining and teaching .
Thanks Jack! So glad we could help out!
Dave is doing such a great job 👏 amazing video.
Thanks Paul! Left chest print locations are the source of frustration for many decorators just starting out, so we wanted a resource that helps make print placement as accurate and easy as possible!
Thanks bro for the tips!
Thanks RJ! We're always happy to help out in anyway we can!
I’ve had Transfer Express on my radar for quite some time now. I find the videos to be helpful and I’m feeling pretty confident to place my first order sooner rather than later.
Thanks Lou, we're always happy to help out however we can, be it heat printing education & resources, apparel trends or small business tips. If you have any specific questions we're right here to answer them 👍
@@transferexpress Thank you, I appreciate it. I surely will keep that in mind too. 🙌🏾
Thank you! The easiest way explained!
Thanks, We're always happy to help apparel decorators out- Especially with tricky placements like these left chest prints (That aren't actually so tricky) ;)
I really love this video. I went to your website to look at ordering some DTF prints from your company and was unpleasantly surprised to find that you have a 50 minimum. I'm small business and print one shirt with one design here and there. Unless I get a sports team or something, 50 is a bit much. Guess I will stick with who I use now
Thanks Trish! While we carry a variety of different heat transfer types, our DTF Transfers (UltraColor Max: www.transferexpress.com/heat-applied-transfers/ultracolor-max ) are available in any quantity, there is no minimum. You may have had our single-image screen printed transfers selected, which are made for lower costs on more bulk-production runs and do have a 50 quantity minimum.
Our UltraColor Max DTF Transfers can be ordered in any size from .25 x .25" all the way up to 22 x 22" and start at just 6 cents per square inch for very low costs in any quantity.
@@transferexpress Thank you :)
I’ve seen so many operators who just don’t take the time to evaluate the garment accurately. There’s nothing worse than a low left print on shirts for women’s groups.
Bingo, You got it! Just that extra couple seconds to check placement to the garment makes a world of a difference!
Wearing one I flubbed right now. 😅
Thank you so much!!!!!! Very helpful!!
Absolutely! We're always happy to help out.
Thank you! Great video.
We're so happy we could help out! 😊
Can you guys do a video on where and how to do a back Hoodie & Crewneck placement ?
Also how large can a back dtf design can go as I want to add a large back piece to fill the back of Hoodie’s and Crewneck
Thanks
Willie
That’s a great suggestion Willie! While we’re working on it, you can check out the print placement on the back of hoodies that we cover in this video right around 14 minutes: ruclips.net/video/dwRFRT2iyFw/видео.htmlsi=iBRkvBazs00qLf6q
As for sizing, on adult sizes you can pretty safely print 13” w x 17”h or larger on the back for a big full back print.
great tips, thank you
Thanks! We're always happy to help!
Thank you for a great tutorial.
You're welcome, we're always happy to help out!
When are you having a convention in Cincinnati? I would love that.
Great question Jack! Unfortunately, we're not going to be in Cincinnati this year, but we will be in Indianapolis Oct 3-4th at the Graphic Pro Expo.
You can see all of upcoming in-person & virtual events here: www.transferexpress.com/events-schedule
is it my eyes but whatever i print mainly letters it never ends up straight any tips ???
Thanks Dave!
Always happy to help!
Thanks Dave
I'm always happy to help! Thanks Penny!
I have the same shirts, same brand, same size. I fold my shirts in half an press the center line (to later add a back design), then I find where the collar meets the shoulder and place my LEFT chest logo. Each shirt comes out different. Some logos are closer to the center line than others. Am I doing something wrong ? Is this normal? OR should I press the center line for each shirt and place the LEFT chest logo at the same distance from the center?
Thanks so much .. I have searched high and low to get this explanation .. i am using print on demand so I have to do it all on the computer .. do you do print on demand at all?
Yes, a few different ways. We do offer print on demand services through STAHLS' Fulfill Engine, essentially just set up products to sell online (even integrated with Shopify) and push production and fulfillment out to a vendor (print shop) that will fulfill your apparel orders for you. Learn more at fulfillengine.com
Additionally, we also offer the backend of that software for decorators or brands looking to produce in-house for higher profit margins compared to outsourcing for print on demand. With heat transfers (like the Goof Proof screen printed transfer or the Ultracolor Max direct to film heat transfers we use in this video) it's easier and a lower investment into equipment than ever before. No need for the risk of expensive bulk printing runs or stocked pre-printed inventory, order what you need when you need it, and produce when the order comes in.
You can learn more about that software and the benefits here: www.stahls.com/fulfill-engine
We have a video showing that process of printing on demand with a heat press a little bit here: ruclips.net/video/Ja4vXMgaaOU/видео.html
THANKS. I WANT TO KNOW HOW TO PUT PICTURES ON HOODIE
You're in the right spot! We have a great video on printing hoodies here: ruclips.net/video/qqpjz8fREOc/видео.html
As well as a video about the right transfers to use for printing photographs on apparel: ruclips.net/video/eHTV_Kf1eIY/видео.html
Can pls explain again with spacing for 4in or 4.5in round logo print. Include image with crosshair where should we make sure is correctly alligned for polo shirt. Thanks @transferexpress
For a round image, I would recommend a graphic closer to 3.75"-4" as 4.5" can look a little large for a left chest with circle or square graphics. We can't provide an image in the comments section here, but we have some placement guidelines here, as they do differ with the size of the garment: blog.transferexpress.com/left-chest-shirt-printing-placement/
Additionally, in our print placement and positioning video, we show a left chest placement on a polo: ruclips.net/video/dwRFRT2iyFw/видео.html
Great info and great job Dave!!
I have a design that the length is 6.78 but the height 4.0. No matter what size I bring it to the length makes it a challenge. I don't want it to be small because of the length. How should I measure it for a left chess placement.
Hi Brady- Scaled to 4 x 2.37" would be a great size for an adult left chest print. Anywhere in the 3.5 - 4" wide range would size perfectly to the print location. The only thing that's worth double checking is that any small details or lines still meet print minimums.
Is this the same with a 3x shirt? Only 4 fingers down?
Great question! It would be just slightly lower: this is where checking the placement against the sleeve like we show at 03:20 here would confirm the correct placement.
where can I get a placement ruler please? TIA
We have our placement rulers available in our Application Kit: www.transferexpress.com/heat-press-accessories/application-kit
The kit also includes some very helpful heat printing tools: A mousepad for raising print areas, temperature test strips, a pack of cover sheets, application guides, $10 account credit and a t-shirt pre-printed with standard print sizing and placements!
Preciate this fr!
Goldy T! We're always happy to help- Spot on placements help everyone succeed!
So we got the measurements down and over. How we make sure the actually horizontal wording is level and not dipped up or down at either end 😢
Great question! With proper loading of the garment onto heat press you can line it up to the edges of the platen (just like we did for the Palm Bay text graphic we show at 5:58 for a straight placement). However, with smaller platen sizes it can be tricky to ensure the garment is straight, so you can lay it flat on a table to place the graphic straight, then tape it down, similar to how we show it at 4:16 in this video (just we show it on a mannequin).
Using a technique like we show in this placement in positioning video ( ruclips.net/video/dwRFRT2iyFw/видео.html ) you'll see we find the center of the transfer and then crease it at the top and bottom- Ensure those creases line up with the centerline of your left chest placement and it'll be perfectly placed, nice and straight!
Alternatively, just like with the placement guide we use in this video at 5:36, you can align your graphic to the bottom edge (or if the transfer carrier is cut straight you can align to that too) when aligned to the collar and the shoulder seams.
Hope this helps!
bravo
Thanks! We're always happy to help out.
Do you do drop shipping
While we do not provide drop shipped decorated apparel or transfers, you can find drop shipping solutions from a network of decorators using www.stahls.com/fulfill-engine
❤
We're always happy to help!
Why are you not wearing a T-shirt?
Haha Dirk, Dave gets that a lot. We can assure you, he wears plenty of t-shirts too.
🎉❤😂😊🎉
Young James Williams Mary Moore Ronald
I bet you did plenty of pride shirts.
learned nothing. nothing here is efficient and systematic. I think the best way would be to print a template for employees to follow. I think you are speaking to people who make shirts with dtf as a hobby
You aren’t going to be a pro at anything done for the first time. T shirt pressing works as you get a feel for it overtime. This video is spot on for finding where to place a logo. once you get good, you become efficient. Then you won’t even need a centerline as you can eyeball it and get it perfect every time.
Great video, thank you 👍
Thanks! We’re always happy to help out!