When I was looking for fogging machine that I could be used for as a fogging insecticide machine to kill mosquitoes the JDR 400W Fog Machine website popped up and it advertised that this machine could actually do the job. My question is: Is it necessary to add water to the oil fogging insecticide to make fog or it can make fog without adding any water to the fogging oil? The Black Flag Fogging insecticide fogging oil that I bought does't say add water to the oil to make fog. Thank you and looking forward to hear from the JDR 400W Fog Machine manufacturer.
Sure.Dear friend. E.g:In a space of 40 square meters, ①Use 1:10(Oil: Water) light concentration of smoke oil, spray for 20 seconds,the smoke disappears after 5 seconds; ②Use 1:5(Oil: Water) medium concentration of smoke oil, spray for 20 seconds, the smoke disappears after 30 seconds; ③Use 1:3(Oil: Water) high concentration of smoke oil, spray for 20 seconds, the smoke disappears after 5 minutes.
I bought this machine from the U.S. My question is could I use this fogging machine in another county that have 220 volts power generation? The Parameters said that 110 volts for U.S. and 220 volts for Europe. That does mean this machine have dual voltage input??? Thanks.
Hello. I bought this machine about a year ago and don’t use it too much. My machine heats up and I have replaced the fog switch control, but still no fog comes out.
Hi.The machine might be blocked due to high concentration fluid, not clean fluid or overheat, so regular care and maintenance can ensure long-term use. After about 40 hours’ continually use, please use 80% distilled water and 20% white vinegar to remove the accumulated impurities inside the heat pipe, as following steps: 1）Washing the pipe in the tank and the filter head. 2）Pour out the fog liquid, replace by the cleaning liquid (80% distilled water and 20% white vinegar), turn on the power, and keep it operating till the cleaning liquid runs out.
Dear friend You can try to clean the smoke machine. Periodically clean your machine to reduce replacement parts and repair expenses. 1.The poor fog liquid can cause blockage. It is recommended to use high quality fog liquid. 2.The machine might be blocked due to high concentration fluid, not clean fluid or overheat, so regular care and maintenance can ensure long-term use. After about 40 hours’ continually use, please use 80% distilled water and 20% white vinegar to remove the accumulated impurities inside the heat pipe, as following steps: 1）Washing the pipe in the tank and the filter head. 2）Pour out the fog liquid, replace by the cleaning liquid (80% distilled water and 20% white vinegar), turn on the power, and keep it operating till the cleaning liquid runs out. 3. If the fog turns less, and the pump makes noise, or cannot spray fog, you should turn off the power immediately and at the same time check the fluid tank, fuse, controller interface and power plug. If all of these are normal, please connect the power with the plug and try again. If it still doesn't work, please contact us via back office order.
Periodically clean your machine to reduce replacement parts and repair expenses. 1.The poor fog liquid can cause blockage. It is recommended to use high quality fog liquid. 2.The machine might be blocked due to high concentration fluid, not clean fluid or overheat, so regular care and maintenance can ensure long-term use. After about 40 hours’ continually use, please use 80% distilled water and 20% white vinegar to remove the accumulated impurities inside the heat pipe, as following steps: 1）Washing the pipe in the tank and the filter head. 2）Pour out the fog liquid, replace by the cleaning liquid (80% distilled water and 20% white vinegar), turn on the power, and keep it operating till the cleaning liquid runs out. 3. If the fog turns less, and the pump makes noise, or cannot spray fog, you should turn off the power immediately and at the same time check the fluid tank, fuse, controller interface and power plug. If all of these are normal, please connect the power with the plug and try again. If the problems still cannot be solved, please connect us at any time.
Hi, dear friend The oil drum is fixed inside the machine , and the white knob at the top of the machine is the opening for the drum. Have a nice day! JDR Music
When I was looking for fogging machine that I could be used for as a fogging insecticide machine to kill mosquitoes the JDR 400W Fog Machine website popped up and it advertised that this machine could actually do the job. My question is: Is it necessary to add water to the oil fogging insecticide to make fog or it can make fog without adding any water to the fogging oil? The Black Flag Fogging insecticide fogging oil that I bought does't say add water to the oil to make fog. Thank you and looking forward to hear from the JDR 400W Fog Machine manufacturer.
We had a real problem with setting off our fire alarms. Even though we ventilated well, we couldn’t use the machine without the alarms going off. FYI.
Good Instructions. Thank you.
Am I supposed to use a mixture of water and fog fluid? I saw it says use a 1:3 mixture for super thick fog lasting up to 5 minutes.
Sure.Dear friend.
E.g:In a space of 40 square meters,
①Use 1:10(Oil: Water) light concentration of smoke oil, spray for 20 seconds,the smoke disappears after 5 seconds;
②Use 1:5(Oil: Water) medium concentration of smoke oil, spray for 20 seconds, the smoke disappears after 30 seconds;
③Use 1:3(Oil: Water) high concentration of smoke oil, spray for 20 seconds, the smoke disappears after 5 minutes.
How do I order another wired controller for the JDR-FMW-400 model?
Will one light controller control both fog machines?
What's size battery I need for the remote?
I bought this machine from the U.S. My question is could I use this fogging machine in another county that have 220 volts power generation? The Parameters said that 110 volts for U.S. and 220 volts for Europe. That does mean this machine have dual voltage input??? Thanks.
Dear friend
Thank you for choosing the JDR Fog Machine.
The voltage range of The JDR fog machine is 90-130V.
Have a nice day!
JDR Music
Hello. I bought this machine about a year ago and don’t use it too much. My machine heats up and I have replaced the fog switch control, but still no fog comes out.
Hi.The machine might be blocked due to high concentration fluid, not clean fluid or overheat, so regular care and maintenance can ensure long-term use. After about 40 hours’ continually use, please use 80% distilled water and 20% white vinegar to remove the accumulated impurities inside the heat pipe, as following steps:
1）Washing the pipe in the tank and the filter head.
2）Pour out the fog liquid, replace by the cleaning liquid (80% distilled water and 20% white vinegar), turn on the power, and keep it operating till the cleaning liquid runs out.
@@musicjdr8373 does " keep it operating" mean spray fog or just turn it on ?
Is this a water based Fog machine? What Fog fluid will you recommend in this machine
It is a smoke machine.Professional fog machine oil is sold in Amazon, you can search for "fog machine"
My machine won't heat anymore after approx 6 uses. The light on the back is green but only spits out cold juice... help!
Dear friend
You can try to clean the smoke machine.
Periodically clean your machine to reduce replacement parts and repair expenses.
1.The poor fog liquid can cause blockage. It is recommended to use high quality fog liquid.
2.The machine might be blocked due to high concentration fluid, not clean fluid or overheat, so regular care and maintenance can ensure long-term use. After about 40 hours’ continually use, please use 80% distilled water and 20% white vinegar to remove the accumulated impurities inside the heat pipe, as following steps:
1）Washing the pipe in the tank and the filter head.
2）Pour out the fog liquid, replace by the cleaning liquid (80% distilled water and 20% white vinegar), turn on the power, and keep it operating till the cleaning liquid runs out.
3. If the fog turns less, and the pump makes noise, or cannot spray fog, you should turn off the power immediately and at the same time check the fluid tank, fuse, controller interface and power plug. If all of these are normal, please connect the power with the plug and try again. If it still doesn't work, please contact us via back office order.
I just couldn't screw the handle on! Help!
Should water be run thought the machine to clean it out after using?
Periodically clean your machine to reduce replacement parts and repair expenses.
1.The poor fog liquid can cause blockage. It is recommended to use high quality fog liquid.
2.The machine might be blocked due to high concentration fluid, not clean fluid or overheat, so regular care and maintenance can ensure long-term use. After about 40 hours’ continually use, please use 80% distilled water and 20% white vinegar to remove the accumulated impurities inside the heat pipe, as following steps:
1）Washing the pipe in the tank and the filter head.
2）Pour out the fog liquid, replace by the cleaning liquid (80% distilled water and 20% white vinegar), turn on the power, and keep it operating till the cleaning liquid runs out.
3. If the fog turns less, and the pump makes noise, or cannot spray fog, you should turn off the power immediately and at the same time check the fluid tank, fuse, controller interface and power plug. If all of these are normal, please connect the power with the plug and try again. If the problems still cannot be solved, please connect us at any time.
Where is the oil drum
Hi, dear friend
The oil drum is fixed inside the machine , and the white knob at the top of the machine is the opening for the drum.
Have a nice day!
JDR Music