It's too bad all the corny channels that already have the money for sweet setups get all the views, likes, & moneys, but you still got a shot kid! Good on ya! Also, appreciate you keeping it 100% and showing the growing pains which are our mistakes. Or to quote Bob Ross, "happy accidents." Doesn't work out so well when you're trying to forge weld. So I've heard.
That’s a beast of a hunting knife, and that San mai came out awesome! My first San mai is my Viking build so that’s gonna look pretty sweet when it’s done!
A very timely video for me, as I will be starting a wrought go mai knife this morning. Hope mine comes out as well as yours! I'm going to etch mine before the glue-up and am curious about why you etched after you put the scales on. My way doesn't involve that cursed nail polish . . . .
Good luck. And i did it this way because i like to have my knives fully etched and its difficult to get the handle and knife flush all around the handle before etching. And it could lead to line up issues because of the tiny tolerance between the material and pins.
Was hammering wrought iorn into stock today and I noticed the blacksmith who worked it before me worked the bending too cold leaving fractures I welded most of them closed and one little peice was splitting like crazy and freying apart so I decided to weld the whole thing together.. I got the weld good and made some workable wrought iorn gonna work it more tomorrow and get some impurity’s out not sure what I’m gonna use it for but from folding the edges into itself to keep from splitting apart I imagine there’s gonna be some crazy grain on it once done ( I did this for all the ppl who say you can’t weld your ends and bits into workable wrought iorn & or that it’s not worth it.. it’s always worth it when you have some clean fresh wrought)
This summer once I build my coal forge I’m gonna make a billet full of wrought iorn bits and weld them all together and make some new stock (my current forge vevor single burner can weld with 7psi it’s also not the heat as much as the person working it.. before I couldn’t weld steel lower than 10-15 so gonna go back and try it on 7 tmr
The slag that's in wrought iron will dull a band saw blade almost immediately. Just always grind it or use a andle grinder to cut it. It seems it's only like that after you hot work it for some reason.
I currently dont. I only ship continental US. You could email me and we could figure something out if you find one thats avaiable and you want it. The one on this video is already sold so i cant do this one.
Hi. Nice job man! I do not know what this "wrought iron" really is, but if it is just a raw iron, it doesn include any carbon, or other stuffs, so it doest get hardened no matter how hard you try to quench it. Of course you will get that nice looking by queinching, even if it doesnt get hard. But anyways, nice job! I like to watch your knife making videos. Pro!
Its old school mild steel from like 100+ years ago. Since the process isnt as good as it is today it had tons of impurities which give it that grain when etched.
I see editing should be improved especially the transition of what you're doing. It jumps to another sequence skipping the details. Still a very good product of your craft.
It's too bad all the corny channels that already have the money for sweet setups get all the views, likes, & moneys, but you still got a shot kid! Good on ya! Also, appreciate you keeping it 100% and showing the growing pains which are our mistakes. Or to quote Bob Ross, "happy accidents." Doesn't work out so well when you're trying to forge weld. So I've heard.
Thanks. Growth is slow but sure.
That’s a beast of a hunting knife, and that San mai came out awesome! My first San mai is my Viking build so that’s gonna look pretty sweet when it’s done!
Speaking of which i need to start my build soon. Im tired of starting the challenges 2 weeks before i need to upload 😑
I always find forging wrought iron really fun because of how much it moves compared to tool steel/HC steel.
It moves nice and easy
Beautiful knife, great craftsmanship 👍
Thank you. Glad you liked it.
That turned out amazing!
First time working with wrought iron. It really is a beautiful material.
Beautiful knife. Great job
Thank you
Very well done.
Thanks
Great work, beautiful knife
Thank you
Beautiful knife !!
Thank you
Love this channel
This channel loves you
A very timely video for me, as I will be starting a wrought go mai knife this morning. Hope mine comes out as well as yours! I'm going to etch mine before the glue-up and am curious about why you etched after you put the scales on. My way doesn't involve that cursed nail polish . . . .
Good luck. And i did it this way because i like to have my knives fully etched and its difficult to get the handle and knife flush all around the handle before etching. And it could lead to line up issues because of the tiny tolerance between the material and pins.
Very beautiful. 👍👍👍
Thank you
That was sick!
Thanks glad you liked it.
Awesome blade and stunning handle.
Thank you. Glad you liked it.
Neat a smiley face in the blade!
Where i didnt see one?
Great job
Thanks
That thumbnail for the video.👌🏼👌🏼👌🏼
Thank you. I tried 😬
Well done come out beautiful
Thank you
Nicely done 👍
Thanks
Damn dude you make some clean knives
Thanks
Best lookin knife I've seen on RUclips!
Thanks. Glad you liked it.
Was hammering wrought iorn into stock today and I noticed the blacksmith who worked it before me worked the bending too cold leaving fractures I welded most of them closed and one little peice was splitting like crazy and freying apart so I decided to weld the whole thing together.. I got the weld good and made some workable wrought iorn gonna work it more tomorrow and get some impurity’s out not sure what I’m gonna use it for but from folding the edges into itself to keep from splitting apart I imagine there’s gonna be some crazy grain on it once done
( I did this for all the ppl who say you can’t weld your ends and bits into workable wrought iorn & or that it’s not worth it.. it’s always worth it when you have some clean fresh wrought)
This summer once I build my coal forge I’m gonna make a billet full of wrought iorn bits and weld them all together and make some new stock (my current forge vevor single burner can weld with 7psi it’s also not the heat as much as the person working it.. before I couldn’t weld steel lower than 10-15 so gonna go back and try it on 7 tmr
Looks sick bro. 👍🏻
Thank you
fantastic!
Thank you
Love from Florida
Back at you from Florida as well
Gorgeous 😍 😍
Thank you
Thanks for the tips
Thanks for watching!
HAHAHA Dennis Tryell money... That was great!
We can all dream 🥲
The slag that's in wrought iron will dull a band saw blade almost immediately. Just always grind it or use a andle grinder to cut it. It seems it's only like that after you hot work it for some reason.
I didnt know. Thanks for the info.
Very cool
Thanks
Your work is brilliant this knife looks amazing do sell and ship to the UK?? I would love one of your knives
I currently dont. I only ship continental US. You could email me and we could figure something out if you find one thats avaiable and you want it. The one on this video is already sold so i cant do this one.
@JPsBladeworks thanks for getting back to me I've just joined up on your website so I will definitely be sending you an email. Thanks again
The silica in the wrought iron is really hard on bandsaw blades…cutoff wheels on an angle grinder is your friend!
I didnt know that. Thanks
That’s awesome looking, can you try one with a nickel shim on the same materials. Fla in the house
Once i get some
Hi. Nice job man! I do not know what this "wrought iron" really is, but if it is just a raw iron, it doesn include any carbon, or other stuffs, so it doest get hardened no matter how hard you try to quench it. Of course you will get that nice looking by queinching, even if it doesnt get hard. But anyways, nice job! I like to watch your knife making videos. Pro!
Its old school mild steel from like 100+ years ago. Since the process isnt as good as it is today it had tons of impurities which give it that grain when etched.
Just leaving a comment for the algorithm
I appreciate you
Nice
Thanks
👍👍👍
🙏
👏👏👏🤜🤛
🙏
I see editing should be improved especially the transition of what you're doing. It jumps to another sequence skipping the details.
Still a very good product of your craft.
Thank you. Im a very crappy editor. One day ill be able to hire someone with actual skills 😅
That would be a great nice to kintsugi. Fill the gaps with gold. ❤
If i could afford it