Great video!!! I have a 75inch Hisence tv. I followed your instructions step by step and you saved me over $500. You definitely earned my subscription! 👍🏾
I watched your video as a guide before purchasing and performing the replacement of my LED'S on my 85" Hisense. Your video helped out so much. The only real difference was that my LED'S were glued down rather than clipped in, but I managed to get them off. All 16 of them...lol. TV is back up and running now. Thanks again for the upload of the video and for supplying the correct replacement part.
Was it just bad leds? Or did you have to replace any boards? My 85 just went out. I have sound but not picture. I replaced the Main Board but same problem.
I ordered the set of LED strips from Shop Jimmy for this model. They were listed as used. They burned out within 2 weeks so I returned them for a refund and they had no more in stock. So I replaced a total of 10 single bad LED's on the original strips with LED and lens cap kit I bought from them, and over 2 months later, it still works.
I can say that I safely was able to do this with my 55H7B today and I’m so happy, tried with Samsung in the past and failed but this guy made it simple and clear. Previous fail was I bent the screen a tad but what I did this time was do it in a king bed and slide the screen off and back on
If the screen went dark all at once wouldn't that mean that there must be another issue than LEDS?.. What are the odds that ALL 14 (or how many in the Hisence 75R6E3) light strips went out at once?...or are they connected to where if 1 goes out they all go out? I do see a picture in the screen when I get close to the TV screen. And the sound is working. Thanks
Parts on order from ShopJimmy, but what did I get myself into? This looks like several careful hours. At age 84, I'll have to do it to save my excellent picture Hisense 55" TV. Thank you.
@@Franckystudios unfortunately no. I had a board issue and it cause further problems. It was an easy fix but I couldn't find a board anywhere so I had to toss it.
@@anthonywert Thank you. I was going to try to fix mine, I thought it wasn't worth doing that. I had to ask you. Thank you for the update. I will trash it now.
Whys nobody done a video yet explaining about the voltage regulator and how that can cause spontaneous backlight issues? I've seen it no where on RUclips but just came into the issue myself. So anybody who's having spontaneous backlights that work fully but don't work until properly until the tele warms up you probably just need a new power board. Thank goodness I didn't take my screen apart for nothing or though I did order new backlights.
Accidentally mixed up the filters I got everything back together can see small scratches under screen when it's white and see finger prints also is this because there not in right order or did I mess it up
Turn the lights off in the room, grab a flashlight, and shine it on the TV. If you can’t see anything on the screen then you don’t have a backlight problem. You have a black screen problem. Completely different diagnosis
I was thinking of repairing my hisense 55r6e but its a hundred dollars cheaper now then it was when I first bought it so meh just bought a new one. It lasted a little over 5 years so most likely something else was going to go like the mainboard or power supply.
My 65 hisense roku TV 2018 got really dark on half side of screen could see light flickering a little bit hisense 65r6107 is its model number where do I order light strips
I have a Hisense 50 50H7C and the other evening while watching TV I ran downstairs and came back up to a blank TV that still had the audio going, after shutting it off + unplugging for 60+ seconds I tried turning the TV on only to briefly see the Hisense Logo fade away... yet I could still hear audio and change channels/inputs with the black screen. I purchased a replacement T-Con board, proper model for my model TV and it looks like an easy enough replacement... I'm just hoping I don't have to do all of this!!
Hello sir good morning,i have a hisense tv 65" ,unfortunately my little boy hit this by his toy and the screen has been damaged (crack / black) but still working.i just want to ask what was the damaged,what is to be replace?and how much is the cost? Thabk you sir
If you can even find people that repair tvs good luck. If you are not mechanical and electrical inclined don't even try. Most time now days the parts cost as much as a new tv with some components. Everything is just throw away now... I've got a 75" to try and repair... 😬 Gotta have a heck of a room and tables to lay everything on to even try this...
there are three sheets and the hard plastic.... i replaced my strips and am mounting everything back together again..... could someone tell me what is the order of the sheets to make them fit together
Hi my name is eric I have a hisense 50 inch led lcd 4k tv here is the info I turn it on and the hisense logo appears also the no signal logo but the top half of the screen is so dark you can barely see the bottom is still lit. screen goes dark after about 30 seconds completely hisense 50 in 4k led lcd 50h7gb1. Not sure I have the tools to fix it should I take it somewhere?
So on my 75" hisense there's this black bezel piece that snaps on all the way around. Before you put the metal bezel on. I cant figure how how the piece on the bottom goes on where all the ribbon cables are. No matter what I try the ribbons cables are in the way. I can't rem how they were on originally
Hello, i changed the LED lights and it flashes on and goes back out i can tell the tv is on because i can hear the sound is there another reason why this would be happening
@@chrismarsh2649 it didnt work… im guessing the motherboard in it up Or something but i had to get rid of the entire 75 inch tv and i just bought another
75R6E3 backlight need to be changed and wanna know should I hire someone to do it? Afraid I won't put back together right after reading comments. It's my sister's TV went out while was house sitting over summer and I feel responsible.
@@charmgurl It ended up being the powersupply to the leds, I had changed all the leds found them on aliexpress but it hadnt fixed it. I was going to put it all back together, the damn cat walked on the screen and shattered it... At least costco refunded it before and I got a Hisense LG5 120inch Lasertv , SO much better!
Oops. Cracked the screen trying to take it out and pressing my thumb a little too hard on the edge. be careful I was working on a 55-in 6-year-old cheapo model so I just wanted to try it for the experience. everything else worked out smooth but be careful with that screen.
Greetings, Thanks for the Vid. I have a HiSense 55" Roku TV It shut off the other day and would not turn back on. The standby light turns on when plugged in then dims and flashes once goes black for a couple seconds this sequence repeats continuously. I replaced the power board. Same issue. I measured the power from the USB port and the USB power seems to cycle with the light sequence. as if the TV is rebooting. Any ideas ?
I think this is what it does when the LEDs go out. Take your phone flash light or light in a dark room hold the light at your screen you will be able to see the logos if tv is on. But the LEDs aren't lighting up. They work like Christmas tree lights. Few go down none will work. Boards usually know how much power they are supposed to be using so it could flash off and on as a safety measure.
@@regularguyfixes3142 I have a Hisense 58A6100UWR and when I turn it on I can see the Hisense/Roku logo, but then it goes away. Does this sound like backlight only issue? I would be willing to replace the backlight, but I don't want to go down a rabbit hole.....
@@ryahrens if the logo Is bright like normal then I don't think your leds are bad. I get no image on mine when turned on unless you hold a flashlight to the screen then you can just barely make out an image.
Does anybody know how many LED strips I would need for a Hisense 43H4030F3 43" TV? I hate to do a complete teardown before ordering just to count the strips. More chance of screwing something up or otherwise breaking something else. I've searched all over for a count or another teardown I could count myself but was unable to find anything. (Apologies for the necro-posting)
Nothing solders in right? Just clips and screws? If so I can do this definitely!!! I’m going to. Cost of parts for my two TVs need repairing is just 130 bucks. Repair guy wants to charge 500 at base! I’m not rich lolz So I’ll do it myself
I have the Hisence 40 H3C that recently the back light went out . When powering the TV on the logo lights up momentarily . I have sound but can barely see the picture. Trying to determine if it is a unit board issue . What indicates that the led strip need to be replaced?
Did it all, found a blown led bulb. Replaced it, and when I turned the tv on, Hisense came on quick, and then went away. The infrared light started blinking, but no picture. I was able to fix a Samsung tv earlier and resolved that one. This one I don't know. Guess take it all apart and check ribbons and connections at the light strips ?
@@avitanoyt7953 i fixed backlighting issue but broke screen when we were flipping it back over cause we didn’t support each corner (only three corners supported) so I guess im pitching it
Jeremy Pineda hmmm that's funny...mine just died tonight...wonder if they have a two year timer installed to power surge the LED to force you to pay for repair or upgrade. I'm pissed right now.
I bought a Samsung, and it had a stripe on it right out of the box. Took it back for a replacement. Same thing. Bought a Hisense, and was working pretty good for a couple years. Then, got this black screen problem. Mine's a backlight issue, but I'm not going to take it all apart like the video.
@@jessesamson7392 hisense is junk. ours quit just after two years. Pretty sure the backlights are bad cause you can turn the TV on and take a phone flashlight and see the hisense logo
You missed one of the clips the led strip goes under ! It was the next to the last strip you botched ! That should have been obvious when you edited this video ! This would drive me crazy , and I would have gone back and fixed it !
Great video!!! I have a 75inch Hisence tv. I followed your instructions step by step and you saved me over $500. You definitely earned my subscription! 👍🏾
I watched your video as a guide before purchasing and performing the replacement of my LED'S on my 85" Hisense. Your video helped out so much. The only real difference was that my LED'S were glued down rather than clipped in, but I managed to get them off. All 16 of them...lol. TV is back up and running now. Thanks again for the upload of the video and for supplying the correct replacement part.
Was it just bad leds? Or did you have to replace any boards? My 85 just went out. I have sound but not picture. I replaced the Main Board but same problem.
Wowww
I ordered the set of LED strips from Shop Jimmy for this model. They were listed as used. They burned out within 2 weeks so I returned them for a refund and they had no more in stock. So I replaced a total of 10 single bad LED's on the original strips with LED and lens cap kit I bought from them, and over 2 months later, it still works.
Y
I can say that I safely was able to do this with my 55H7B today and I’m so happy, tried with Samsung in the past and failed but this guy made it simple and clear. Previous fail was I bent the screen a tad but what I did this time was do it in a king bed and slide the screen off and back on
I have the same exact model. The picture quality is tinted blue. Does LED replacement fix that?
If the screen went dark all at once wouldn't that mean that there must be another issue than LEDS?.. What are the odds that ALL 14 (or how many in the Hisence 75R6E3) light strips went out at once?...or are they connected to where if 1 goes out they all go out? I do see a picture in the screen when I get close to the TV screen. And the sound is working. Thanks
I just fixed my hisense 48 using this video and I'm paying somebody to do it next time 🤣🤣 super useful video though thanks
Parts on order from ShopJimmy, but what did I get myself into? This looks like several careful hours. At age 84, I'll have to do it to save my excellent picture Hisense 55" TV. Thank you.
Looks extremely tedious but boy am I glad they plug in and you don't have to solder anything!
Watching you lift a screen without suction cups both impressed and frightened me lolol9p
Where do you buy the parts? Mine just broke down tonight.
I have the 43 inch Hisense 4k UltraHD
Thanks to you sir, I was able to fix my tv without paying much out of pocket.
Is it still working
@@Franckystudios unfortunately no. I had a board issue and it cause further problems. It was an easy fix but I couldn't find a board anywhere so I had to toss it.
@@anthonywert Thank you. I was going to try to fix mine, I thought it wasn't worth doing that. I had to ask you. Thank you for the update. I will trash it now.
@@Franckystudios Yes, I will trash mine too, thanks for helping me make the decision.
Can I use LED backlights from a TCL ROKU on a Hisense Roku television?
Hi i was woundering if you could tell me were to get led strips for a hisense model 50H5G? Also would just one led keep all of them from turning on?
you get it working i got same model
Does anyone know how many led stripes I need for a 50h6d? Can't seem to find info. Thank you!
Would have been nice to see the tv be turned on at the end of the video. It's still a good walk through .
Probably didn't work
I didn’t see it plugged in or turned on, how do I know if it even works?
Worked liked a charm thank you so much for this guide!!!!
Where I can buy 55 inchu 55u6hq back light led strip..please provide the link.. I can't buy any where...please help I bought new tv 3 month before 😢
Are the led strips wired series or parallel to eachother. I have 25 volts going to the leds and none of them work.
Whys nobody done a video yet explaining about the voltage regulator and how that can cause spontaneous backlight issues? I've seen it no where on RUclips but just came into the issue myself. So anybody who's having spontaneous backlights that work fully but don't work until properly until the tele warms up you probably just need a new power board. Thank goodness I didn't take my screen apart for nothing or though I did order new backlights.
So there’s the TCON board on the bottom, main board on the right. And what’s the board on the left? Power supply including the LED driver?
Accidentally mixed up the filters I got everything back together can see small scratches under screen when it's white and see finger prints also is this because there not in right order or did I mess it up
How do you expect me to do factory reset if i cannot see a thing on my tv
Turn the lights off in the room, grab a flashlight, and shine it on the TV. If you can’t see anything on the screen then you don’t have a backlight problem. You have a black screen problem. Completely different diagnosis
Right!!!!😡😡
@@dangledownoutdoors7302 how do you fix the blackscreen problem
Lazy 😂
Should be a button on that back of the tv
This brand of tv seems to have many problems and most of them occur within three or four years.
How much will cost to fix this issue on a Hisense H9e?
I was thinking of repairing my hisense 55r6e but its a hundred dollars cheaper now then it was when I first bought it so meh just bought a new one. It lasted a little over 5 years so most likely something else was going to go like the mainboard or power supply.
My 65 hisense roku TV 2018 got really dark on half side of screen could see light flickering a little bit hisense 65r6107 is its model number where do I order light strips
you have to UNCLIP the IR sensor from the frame, there is a screw underneath holding the frame on, that's probably why they broke their frame.
I have a Hisense 50 50H7C and the other evening while watching TV I ran downstairs and came back up to a blank TV that still had the audio going, after shutting it off + unplugging for 60+ seconds I tried turning the TV on only to briefly see the Hisense Logo fade away... yet I could still hear audio and change channels/inputs with the black screen.
I purchased a replacement T-Con board, proper model for my model TV and it looks like an easy enough replacement... I'm just hoping I don't have to do all of this!!
Did replacing the T-Con board end up working for you? I'm having this same exact problem on my TV....
Did the t con work?
I have a hisense 75 inch I cannot find it on your site. I need the LED lights model number not coming up.
Hello sir good morning,i have a hisense tv 65" ,unfortunately my little boy hit this by his toy and the screen has been damaged (crack / black) but still working.i just want to ask what was the damaged,what is to be replace?and how much is the cost? Thabk you sir
i have a similar problem and i would love to know. was it resolved?
If you can even find people that repair tvs good luck. If you are not mechanical and electrical inclined don't even try. Most time now days the parts cost as much as a new tv with some components. Everything is just throw away now... I've got a 75" to try and repair... 😬 Gotta have a heck of a room and tables to lay everything on to even try this...
Mine works but has a blue tint, would that be LEDs or Tcon board ?? Taking it apart not to check LEDs.
U left the boards on the back of the tv when u flipped around to take led out?
there are three sheets and the hard plastic.... i replaced my strips and am mounting everything back together again..... could someone tell me what is the order of the sheets to make them fit together
Hi my name is eric I have a hisense 50 inch led lcd 4k tv here is the info
I turn it on and the hisense logo appears also the no signal logo but the top half of the screen is so dark you can barely see the bottom is still lit. screen goes dark after about 30 seconds completely hisense 50 in 4k led lcd 50h7gb1. Not sure I have the tools to fix it should I take it somewhere?
Yeah
So on my 75" hisense there's this black bezel piece that snaps on all the way around. Before you put the metal bezel on. I cant figure how how the piece on the bottom goes on where all the ribbon cables are. No matter what I try the ribbons cables are in the way. I can't rem how they were on originally
hello Jimmy Do you have a 6 led backlight for a Hisense TV model48H5
Where do I order the backlights strips at
Hello, i changed the LED lights and it flashes on and goes back out i can tell the tv is on because i can hear the sound is there another reason why this would be happening
Also can see the screen with a flashlight.
You ever figure this out?
@@kentresadrake1957 you guys and not updating is driving me nuts lol
@@chrismarsh2649 it didnt work… im guessing the motherboard in it up Or something but i had to get rid of the entire 75 inch tv and i just bought another
Am I able to replace the screen my kids cracked mine on the 65 hisence
I tried finding the LED strips for mine but can't, does anyone know where I can order for model 75R6109? 75 inch only 3 years old.
75R6E3 backlight need to be changed and wanna know should I hire someone to do it? Afraid I won't put back together right after reading comments. It's my sister's TV went out while was house sitting over summer and I feel responsible.
Did you resolve yours?
@@charmgurl It ended up being the powersupply to the leds, I had changed all the leds found them on aliexpress but it hadnt fixed it. I was going to put it all back together, the damn cat walked on the screen and shattered it... At least costco refunded it before and I got a Hisense LG5 120inch Lasertv , SO much better!
Do you have a set of these lights in stock currently?
Oops. Cracked the screen trying to take it out and pressing my thumb a little too hard on the edge. be careful I was working on a 55-in 6-year-old cheapo model so I just wanted to try it for the experience. everything else worked out smooth but be careful with that screen.
Where can I buy the reflector sheet
I got problem with my hisense 50k320uw no picture but had sound. Its possible backlight faulty?
Research how to test back light
What is the exact code for the Hisense TV 43inches 4k UHD I need those Led Strip. Thanks.
I know which ones, but I can't log into ebay to get the info. ebay login errors,
Research how to test back light
hello my screen broke please assist..where can i buy or order lcd
Hie where can I get a39 inch lcd screen replacement my little boy broke the tv
Bezel corners will not come off my hisense all screws removed? any suggestions?
Are screens interchangable among Hisense TVs 55 inches?
@Taco but connections on back all the same?
Greetings, Thanks for the Vid. I have a HiSense 55" Roku TV It shut off the other day and would not turn back on. The standby light turns on when plugged in then dims and flashes once goes black for a couple seconds this sequence repeats continuously. I replaced the power board. Same issue. I measured the power from the USB port and the USB power seems to cycle with the light sequence. as if the TV is rebooting. Any ideas ?
I have same issue. Any luck?
I think this is what it does when the LEDs go out. Take your phone flash light or light in a dark room hold the light at your screen you will be able to see the logos if tv is on. But the LEDs aren't lighting up. They work like Christmas tree lights. Few go down none will work. Boards usually know how much power they are supposed to be using so it could flash off and on as a safety measure.
@@regularguyfixes3142 I have a Hisense 58A6100UWR and when I turn it on I can see the Hisense/Roku logo, but then it goes away. Does this sound like backlight only issue? I would be willing to replace the backlight, but I don't want to go down a rabbit hole.....
@@ryahrens if the logo Is bright like normal then I don't think your leds are bad. I get no image on mine when turned on unless you hold a flashlight to the screen then you can just barely make out an image.
@@ryahrens ruclips.net/video/BjaNCZ6B6eo/видео.html
What causes all the strips to go out at once?
They don't go out at once. Probably just one goes out. It's early grade physics: the series connection.
Does anybody know how many LED strips I would need for a Hisense 43H4030F3 43" TV? I hate to do a complete teardown before ordering just to count the strips. More chance of screwing something up or otherwise breaking something else. I've searched all over for a count or another teardown I could count myself but was unable to find anything.
(Apologies for the necro-posting)
Look up ur brand it tells u how many
I’m having the same issue finding out how many strips to order for the same Hisense model
Could you please tell us what order the light filters go back in please. Thanks.
Matthew Cairns for real
I just broke the screen on my brand new 43 inch hisense tv
Would it be cheaper to buy a new one or can it be repaired cheaper?
Nothing solders in right? Just clips and screws?
If so I can do this definitely!!!
I’m going to. Cost of parts for my two TVs need repairing is just 130 bucks. Repair guy wants to charge 500 at base!
I’m not rich lolz
So I’ll do it myself
This is 65inch TV?
Y no llevan pegamento? Para que quede bien asentada la tira a la lámina??
I cannot find the hisense L32A01A LED strips?
how much inches is this Hisense? do you have 43inches available on your shop?
I wonder how many thousands of people still have their infrared sensor hanging off their TV… The video didn’t have that in the re-assemble… LOL
How you turn on??
where can i get the led strips
10q sir so what about 39 inch coronet TV backlight
I opened up my tv and the reflector sheet is taped to the frame. If I pull it will rip 🤦🏻♂️ I might try a heat gun
Can I Ask A Question?
Looks like I’ll just get a new tv
I have the Hisence 40 H3C that recently the back light went out . When powering the TV on the logo lights up momentarily . I have sound but can barely see the picture. Trying to determine if it is a unit board issue . What indicates that the led strip need to be replaced?
Research
My hisense 32 Led shows no information about the channels. This occurred after a heavy rain here in Uganda Kampala
HI ..I mixed up the sequence of the Diffuse sheets...help
missielizzie1 nobody can help been stuck on that for a few days don’t wanna
And were can I buy this screen I call hinsense and no body works there any information?
Its been stated the cost of a new screen is prohibited (costly). May as well replace with a new tv
thank you so much
stuck at trying to remove the clear plastic cover that houses the power button
Right on
Did it all, found a blown led bulb. Replaced it, and when I turned the tv on, Hisense came on quick, and then went away. The infrared light started blinking, but no picture. I was able to fix a Samsung tv earlier and resolved that one. This one I don't know. Guess take it all apart and check ribbons and connections at the light strips ?
Did you ever fix it ?
Sir your keys scratch the LGP sheets
Ok here goes nothing, got the 75” tv layed down. Crossing fingers!
Ugh fixed backlight issue but think i didnt something to screen theres lines all over tv
@@googleaccountuser6976 did you fix it?
@@avitanoyt7953 i fixed backlighting issue but broke screen when we were flipping it back over cause we didn’t support each corner (only three corners supported) so I guess im pitching it
I NEED A COMPARISON BETWEEN LG UM 7780 VS HISENSE A174F
Why you replace them????
Is the narrator an undead zombie cursed to only speak at x0.025 speed?
one of the strips was not properly installed
second last one
Youre a bad man!!!⚡️🤲🏾🤌🏾
Ahhh MAN! You mean I can't sue you when I electrocute myself then knock over my TV?!?! 😄😁😅🤣🤣🤣🤣
Shoulda identified as a transistor
my tv is the same brand i dont know what to do
Jeremy Pineda hmmm that's funny...mine just died tonight...wonder if they have a two year timer installed to power surge the LED to force you to pay for repair or upgrade. I'm pissed right now.
what order are the filters
I have the same question
its usually thickest to thinnest, thickest on bottom and thinnest on top beneath the screen
Your answer lies in this video
Why would all the strips quit at the same time? I think I would look at the led power driver... jus sayin.
Why my TV has failed twice in a year ease inform elaborate asap
I need screen
Hisense are junk. Don't waste your time unless this is fun for you and don't mind fixing whatever breaks next on it.
I bought a Samsung, and it had a stripe on it right out of the box. Took it back for a replacement. Same thing. Bought a Hisense, and was working pretty good for a couple years. Then, got this black screen problem. Mine's a backlight issue, but I'm not going to take it all apart like the video.
@@jessesamson7392 hisense is junk. ours quit just after two years. Pretty sure the backlights are bad cause you can turn the TV on and take a phone flashlight and see the hisense logo
@@ffhjvbuydb78eb same thing going on with my 75 inch 4k ultrahd Hisense tv
@@creativebreezo5219 junk!
What TV above 75” have y’all found to perform well and that are durable/ price affordable
susah juga nak tukar screen
Почему на иностранном языке
yes,
You missed one of the clips the led strip goes under ! It was the next to the last strip you botched ! That should have been obvious when you edited this video ! This would drive me crazy , and I would have gone back and fixed it !
hi I have a question
Emmanuel Gonzalez a year later and still nobody has the answer! What a joke
@@allalonerp after 2 years, no answer.
3 years and still nothing!
4 years nadduh
Going on 5 years now. Maybe you should just ask the question lol