Hi Marc, I've been checking out a few of your vids! This one was really cool with the dice and all the dice towers and stands and holders. My name is Alex or Alexandra! I subscribed to your page and give ya likes regularly from here on out. Great work! And thanks!❤
If you have a resin printer, I’d recommend using that for dice. I printed the same dice as the ones in the video and they came out great. They have amazing detail as well as a nice weight to them.
I'm having trouble imagining any 3d printed dice would be evenly weighted. You know any amount of infill is going to be balanced in one direction or another.
Just looking for some tips on how one would go about designing there own dnd dice holder like show with the dagger how do you get the dice imprints if anyone can point me in the direction of a video or has any advice on doing this that would be great thank you 🙂🙂
which printer model and settings do you use? I've found that quality depends a lot on a) the correct flow rate and b) belt tension. If you need crisp details, also make sure not to print too fast.
Could you share your slicer settings, your prints look amazing! my slicer settings are all over the place. Also Great Video, all my prints I have ever made (3 months of printing) have came from your videos
@@Marc3DP thanks a lot! My problem is the printing sticking way too much to the bed. I print pla with creality ender 6. With raft I may have a better time unsticking it. Thanks again!
Hi, I'm new to 3D printing, Martin. Love your videos. I have an unusual name and would love it if you could send me a stl. file for Carmen so I can slice and print on my Fokoos printer. Many thanks, I'll be busy watching all your videos now!
Please support me with a Like and Subscribe If you like my videos 😊
And watch my LATEST VIDEO, you really have to see this😀👇
geni.us/Latest_Video
Hi Marc, I've been checking out a few of your vids! This one was really cool with the dice and all the dice towers and stands and holders.
My name is Alex or Alexandra!
I subscribed to your page and give ya likes regularly from here on out. Great work! And thanks!❤
How can I get this amazing things ??
Oh sweet, you printed two of my designs! The dice, and modular shelves.
Yes, and both designs are really great 🙂
Where can i find more of your work?
Those dice are my favorite sets
My favorite part would be the spiral staircase for rolling dice. It should be taller for fun.
Please support me with a Like and Subscribe If you like my videos 😊
And tell me what name or nickname print next? 😉
Mitkasan 🤘
Feltics?
How do I get supporst like yours? Can you share your settings??
Can you do Tobi, with an i? It’s my nickname and most people spell it with a y.
If you have a resin printer, I’d recommend using that for dice. I printed the same dice as the ones in the video and they came out great. They have amazing detail as well as a nice weight to them.
I don't have a resin 3D printer yet, but I can't wait to get some 🙂
Real
I oughta show my dad this since he has a 3D printer. I may not play D&D but I love collecting those kinds of dice! Chessex, anyone?
I'm having trouble imagining any 3d printed dice would be evenly weighted. You know any amount of infill is going to be balanced in one direction or another.
I wish I knew what you were talking about so I could help😅
100%infill should bring the best result?. I think
I believe there are a few infill patterns specifically for even distribution, such as cubic or gyroid.
Have no idea if these dice are weighted, I have to ask designer. I think the best results will be with 100% infill.
You can always print them off to use them to create a mold so you can create the proper resin dice
Everything looks good in silk filament
As a dnd enjoyer, this stuff is godly :3
Thanks :)
i love that you called a heptagon a hexagon
You need to print yourself a Turntable for the glamor shots
Really cool prints!!
Not a bad idea :) Thanks !
So many cool things to print,so little time :P Thanks for making this.
Why did the initial sentence give me Sonic.EXE vibes? It shouldn't have but it did.
All your items looked good. Wish I had a 3d printer. Keep up the good work.
Thanks :)
cool he made the name i asked for!
i love gold print items. sooo shinny.
I really like all of the 3d printed stuff you made👍
Thank you :)
you should add links so we can buy some of those metal dice sets as well
I had many of these dice sets directly from the manufacturer as a sample. But I think most of them are available on Amazon 🙂
Thanks for the cool prints! Could you do the name Katelyn next?
Nice done working on
LOVE the D&D content!!
Nice work 👍
Thanks :)
My name in Stefano! Stl file would be great! I am a Patreon's subscriber, you are a genius!
You should print "PeterAndel"
that's not hexagonal (6 sided), that's heptagonal (7 sided)
Just looking for some tips on how one would go about designing there own dnd dice holder like show with the dagger how do you get the dice imprints if anyone can point me in the direction of a video or has any advice on doing this that would be great thank you 🙂🙂
Cool Prints
rw:my bro would go crazy for something like this.
Perfect
Neat!
Siemanko Marek. Spoko kanal. Tak trzymaj 👍
W sumie to Marcin ;) Dzięki 🙂 Pozdrawiam
@@Marc3DP o to przepraszam bardzo za pomylke 😁 🤜🤛
Can you try an articulated bird claws
Oo that would be cool ngl
Bangin'
Ive printed those faceted dice but ive never gotten the numbers to print that clean
which printer model and settings do you use? I've found that quality depends a lot on a) the correct flow rate and b) belt tension. If you need crisp details, also make sure not to print too fast.
@@derToblin I use an ender 3 with the high cuality setting but idk if the orientation helps
If you could print DAVID, it will be greatly appreciated.
Hi can you please print The Pink Pragon
Nice 👍
Thanks :)
3D print Charlie and the cat named ck
Hello.
Where did you find your velvet plate at 4:30 ? I wanted to do the same thing 🙂
Thank's in advance !
This is suede fabric material and I took it from real dice tray I bought some time ago on Amazon :)
Could you share your slicer settings, your prints look amazing! my slicer settings are all over the place. Also Great Video, all my prints I have ever made (3 months of printing) have came from your videos
I use "0.2mm QUALITY" printing settings in PrusaSlicer
@@Marc3DP Ok thanks! I'll try out prusaSlicer, heard its pretty good
Last Update a few hours later: Way better than cura, first layer works way better and the print is super smooth now, thank you again!
Joseph in orange
Ok, so I skipped ahead to the 'your name' part...
What the ****??
That just freaked me the f out!!!!
hii, maybe can you share the link of dice set at 5.18 minutes? Thankss👀👀
I got it on Amazon.com
7:55 hello and good night, I wanted to know if you could make the name Bolsonaro&Lula on the printer. If you can, I will be very grateful! 😊
5:13 anyone can tell me where i can find these dice sets:]
Could you 3d print ALC please
how is a nameplate related to D&D?
Cool
Dungeon and dragons, I now understand what d&d means.
please, could you print "Wakah" in 3D?
Ayeee my names Ethan
Hi there! @ 0:15 what are those string like printings under the golden piece? Looks like piece unstucks easily with those! Is it a slicer thing?
It's RAFT. It helps to stick 3d print to platform. You can turn on in slicer
@@Marc3DP thanks a lot! My problem is the printing sticking way too much to the bed. I print pla with creality ender 6. With raft I may have a better time unsticking it. Thanks again!
Print birb plz
yes!
Yus print da birb✨️
Where did you get those dice at 3:13 😮
From Amazon.com
Which printer did you use?
Prusa MK3s+ and Ender-3 S1 Pro
@@Marc3DP thanks bro!
Am I missing it? Where can I download the STL file?
Links to designs are in description
can you print periwinkle
Are the 3D printed dice fair, consistently?
Do Tugboat
Na marginesie jak się nazywa gra do której są te kostki z 20 lat temu w podstawówce pamiętam grali takimi ale w co nie wiem do dziś
Dungeons and Dragons :)
Where did you get the D&D logo you use with the Modular Dice Display? It's not included.
Sorry for that, I forgot to add link in description ➡cults3d.com/en/3d-model/art/d-d-3d-logo-dungeons-dragons
@@Marc3DP Thanks!
Could you please print FINLAY 🤪
Fantastyczne pozdrawiam
Dzięki, pozdrawiam rowniez :)
Can you do the name “Levi” please?
I’m guessing dices are very important on d&d game right?
Very :)
Oh yeah VERRY important. D20 dice are most important
Popyy pleitaim toys plzzz❤️❤️❤️❤️
3d print my name, Raynell
My name is Laith and can you make it purple
NATE the great
Can you print the name Jax or Gamergeode
print "MEANBEANZS"
Get bro a new ruler 💀
Y'know that Hexagons have 6 sides, correct?
I thought I was the only one who noticed it was a septagon
Right, I didn't check it and I was sure it has 6 sides. So it's Septagon Dice Tray like Aidan said 🙂
Hi... please print Leandro.
My name is Peter
How do I get supports like yours? Can you share your settings??
I use PRUSASLICER with 0.2 mm QUALITY settings
can you 3d print Liam please!
Print Aidan pls
Wolfy
Can you print my name? Azrael
Victor or bebo
My nickname is
My name is bum
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Noah
UKER nickname
Mael
Hi, I'm new to 3D printing, Martin. Love your videos. I have an unusual name and would love it if you could send me a stl. file for Carmen so I can slice and print on my Fokoos printer. Many thanks, I'll be busy watching all your videos now!
pleas print the name
bob
could you 3d print my name?
You can print out my name⬆️
Please, print Kvazar4ik
Only the first two were actually good
Just recently came out as enby, if you could print my new name, Sol, that would be very much appreciated
Israel
Please
Print my name
⟟ think will Byers needs this
Will the wise @noahschnapp
Looks like a bunch of useless junk
If you don't list the cost it's meaningless