NOCO GENIUS 10 HOW TO PUT IN REPAIR MODE
HTML-код
- Опубликовано: 28 авг 2024
- LIKE/SHARE/SUBSCRIBE😉
Enjoyed the video consider pitching in👍
cash.app/$Regal00
/ huntermapp
check out my car dyno🔥
• 00' Buick Regal GS dyn...
My tool box 🧰 tour
• Snap On 84" Epiq tool ...
Tool box 🧰 tour pt.2
• Snap On Epiq 84" ToolB...
#PHILLYDEE #NOCOGENIUS10
Thanks for watching🙏
Share & Subscribe 4 more🔥
finally a vid that explains what i needed to know
GLAD TO HELP, STAY TUNED FOR MORE‼️😉
REALLY appreciate your succinct and informative video -- the user manual wasn't clear but your video was perfect. Thanks!
No doubt...I tried to keep it short & sweet😉
Thanks for watching Subscribe & stay Tune for more‼️🤝
The instructions say to press and hold the mode button for three seconds...all it did for me was to go into 6V mode. Thanks for adding the "secret sauce" that once the 6V light comes on to press the mode button repeatedly until REPAIR is lit.
That's exactly why I made the video
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Just borrowed a Noco Genius 10 from a buddy and have it on repair mode. I live up in the mountains of CO and my battery is about 3 1/2 years old. It was really cold last week and truck was a little slow starting. Hoping this helps me get through the winter.
Glad to see an illustration
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Thank you. Excellent video. Lots of good info and straight to the point. The video on setting supply mode is also excellent. Keep on keeping on.
Thank you
Thanks needed to know how to use the button.
Thanks. Just what I needed to know. Great video.
Glad to help you....
Thanks for watching Subscribe & stay Tuned for more‼️🤝
thanks, exactly what i needed to know and short and sweet
That just what I need,Really helpful 👍, thank you.
Thanks for watching Subscribe & stay Tune for more‼️🤝
Important note, you're supposed to force charge it to 100% before doing repair mode as per the manual. But great video nonetheless
Thanks for watching Subscribe & stay Tuned for more‼️🤝
i'm thinking about buying this, how long would it take it to charge a 80 amp hour platinum agm battery with 1000 cca at 32° and 850 cca at 0°?
@@fallback8314 Probably about an overnight charge, about 8-12 hours? Theres a guide in the manual when you buy it that tells you by amp hours 1000 cca would be 8 hours so 850 would be close behind. It's rated to that between -20C and 40C.
Force charging isn't always required but a good idea.
@@jam3498 I appreciate your response
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Great help! Thanks!
Glad I help you....
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Succint, short and sweet!
YOU GOT IT🤟
Helpful, thank you.
No problem, your welcome back anytime🙏
I believe you are supposed to disconnect the battery from the car to avoid damaging the electronics!!
Yeah...but I've done it multiple times and never had an issue. The Noco is pretty smart and reliable when it comes to avoiding issues like that. I just had it in repair mode and slow charge on one of my cars for two days.
Good looking g 👍🏼
Did it help your Odyssey battery? I have one that is in questionable condition but still less than a year old. I want to try this with my Genius 10 to see if i can get full capacity out of my battery again.
Yo, peace. Thanks for the succinct video.
Thanks for watching Subscribe & stay Tuned for more‼️🤝
How long did it take for the battery to go back to full charge?
1-2hrs
Sorry 4 the wait🤦♂️
THANKS FOR WATCHING, SUBSCRIBE AND STAY TUNED FOR MORE🤝‼️
Did you fully charge the battery 🔋 on regular mode, then put it in trickle charge mode? And did you disconnect the battery terminals from the car and charge it ?
It will charge automatically then once done it'll automatically go into trickle mode maintaining the charge. It's designed to not over charge
THANKS FOR WATCHING SUBSCRIBE AND STAY TUNED FOR MORE🤝‼️
What did you said at the beginning!!??
Cha dele feed bad ??? What was that?
Are you ok broo?
Hello good Morning. Let's see if you can clear up a doubt I have about this battery maintainer/charger. My idea is to install this maintainer inside my vehicle right next to my AGM gel battery connected perpetually to the battery posts with the noco eyelet cables; Having only to connect the 220v power cable to my home network when I want to charge the battery or when I am going to be away from using the vehicle for more than a month.
The question and doubt I have is:
Is the battery drained or rather, could there be some consumption in the battery in the event that while my vehicle is stopped WITHOUT CONNECTING the charger to the power, the battery drains slowly due to some consumption (because it is not connected to the 220v power?
I ask you because I have an optimate and if I leave the maintainer connected to the battery without it being plugged into the house power, the battery will completely drain in two weeks.
I wouldn't leave nothing connected to the battery unless your servicing the battery, but are you sure there's nothing wrong with the battery itself?
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Thank you 🙏🏽
Glad to help👨🔧
THANKS FOR WATCHING SUBSCRIBE AND STAY TUNED FOR MORE🤝‼️
The manual confused me with "solid red". Coz that's blinking red. 😑
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Same here, The manual is not helpful, it says solid red light. should of said flashing red light.
How long do you keep it in repair mode
Til the light turns green but I think it said for a standard wet 12v battery it said 4 hours?
What does it mean when you attempt to go into repair mode and all 3 warning lights come on? I'm referring to the 3 left of the standby light. As we speak I have my battery in charge mode.
Well you wouldn't be in charge mode if you have those warning lights on, sounds like you have a problem. Maybe consider a new battery
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@PhillyDee215 I went into charge mode after I couldn't get it in repair mode. It's complete now. Fully charged.
I did some research and found that all 3 lights mean the battery's temperature is too hot or too cold for the desired mode. And since Satan was sipping a drink next to my ride I'd go with the battery was too hot.:):):):)
Can you tell me how long I needs run the repair mode to able to start charging Thanks!
Im not sure the exact time but when I use repair mode I just let it repair until it stops, the last battery i did took like 4hrs. Then I put it on the charge and it took like another 3hrs to fully finish and complete the charge. The battery was pretty dead but it worked
Thanks for watching Subscribe & stay Tuned for more‼️🤝
Thank you so much!!
How long to charge fully ded battery ?
Can i use it this battery with our weather heat note that i park my car under shadow but its in open area - the degree its more near to 40C = 104F under the shadow
I wouldn't put it in direct sunlight but you should be fine and if you can use it in a cooler area that would be more ideal
Thanks for watching Subscribe & stay Tuned for more‼️🤝
How can I know when I repaired ?? After put in repair mode ?? Does it’s automatically turned off ???
If I can remember correctly.....wants its done with repair mode it will either go into standby mode or to automatic trickle mode which it'll just maintain the batteries charged
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@PhillyDee215 thank you 🙏🏼
How long should it be left plugged in on repair
Apologies, the answer is below. Nice short video . Thank you.
Thanks. I was wondering if the flashing red light was correct for repair mode.
THANKS FOR STOPPING BY👍
right. stupid ass manual doesn't tell you anything.
I got a yellow top AGM fully dead, should I do this?
You can try. It does AGM batteries and the repair mode works great as long as your battery isn't totally shot
Thanks for watching Subscribe & stay Tuned for more‼️🤝
How long does it have to stay in repair mode?
It will automatically go into trickle mode when the repair is finished‼️
Stay tuned for more😉
@@PhillyDee215 what’s trickle mode?
@@Abel3270 basically it'll keep the battery charged as needed, it won't over charge
Do you have to disconnect the battery terminals from the car to charge it?
Nope, once you connect it....it should begin to charge. Just make sure you have the polarity correct.
Thanks for watching Subscribe & stay Tuned for more‼️🤝
For repair mode you need to disconnect the battery per instructions. Also in repair it pulse shocks the battery higher voltage so you really don’t want all that EMI noise on your ecu even tho it’s designed to suppress noise I would jsut disconnect it
@@latenttweet Thanks for watching Subscribe & stay Tuned for more‼️🤝
philly dee doesn't say to disconnect the battery terminal when in repair mode. who is correct here?
@@fallback8314 only mode that works without it being connected to a battery is the supply mode. I have a video coming out shortly explaining the Genius 10 in more detail
Thanks for watching Subscribe & stay Tuned for more‼️🤝
So when you put it in repair mode it’s supposed to be blinking cause the manual got me confused💀?
Yes that light blinks until repair mode is over
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@PhillyDee215 how long it take
@@ratedfuture2595 could take a whole day, I wouldn't take it off til its done. Should go into trickle mode automatically wants the repair is done if I can remember correctly. If not, put it in charge/maintain mode and wants thats done you'll get a steady blinking green light.
How long do I have to charge the device for it to properly function?
What device are you charging? It depends on how dead the battery is, whether its AGM or standard. I've had to use the repair mode twice on some batteries to work properly and then put it on the slow charge mode twice. If it's too dead it may not work
Thanks for watching Subscribe & stay Tuned for more‼️🤝
The noco genius, how long to charge it before I can start using it?
@@mike_beast_berriosberrios5542 Noco Genius 10 is corded so it works once u plug it in and then u can connect it to the battery
@@PhillyDee215 oh okay gotcha , thought it didn't need to be plugged it.
@@mike_beast_berriosberrios5542 the Noco Genius 10 is the battery maintainer which uses a cord.
The Noco battery jumper is cordless and is Portable. This is the one that you have to charge. I have this one too and i believe from dead to fully charged it takes 1hr-2hr. Really depends on how times you use it to jump a car or whatever your trying to supply power to
Doesnt the company recommend you take the battery out to do repair mode, so theyre not liable if it ruins your electronics.
It won't ruin your electronics
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@PhillyDee215thanks man! Im a try this method, as fully charged i can get all eltronics on...but cant get the truck to turn it over.
@@alwaysreturnNurgirl wait do you have the noco Jump box or maintainer?
@@PhillyDee215 maintainer
@@alwaysreturnNurgirl is the battery any good? If so, the maintainer should be able to charge it up or you may have to use the repair option to fix the battery then charge it
How long do you leave it in repair Mode?
It stays in repair mode until the repair is done then it'll automatically go into maintain mode
Thanks for watching Subscribe & stay Tuned for more‼️🤝
@@PhillyDee215 thanks
But first you need to do a regular cycle to 100%, then you go into repair mode
Will is take a charge before the repair? I've had a battery not take charge until I repaired it 1st
Thanks for watching Subscribe & stay Tuned for more‼️🤝
All it does is flash red
Yeah the Repair light blinks red while its repairing
Thanks for watching Subscribe & stay Tuned for more‼️🤝
How does it take to charge a battery form newly being dead back to normal?
Depends on how dead it is, you may have to use the repair mode if it's too dead
@@PhillyDee215 Maybe over 10hrs to charge?