Excellent work. Best design for a bench from pallets that I have seen. I especially like the drawers you added. Very creative design. Thank you for sharing!
I made one today (6/19/23). Nice little project. My pallet was a bit rough so it took a few hours to get it up to snuff, and I skipped the drawers as I don't need them, but all in all, pretty cool, especially for free. Thanks for the great how-to video. Happy Juneteenth Day to all in the US!
@@sheenascott5405 I did. Assuming the "2x4's" in the pallet are indeed standard 2x4's, then the total thickness will be 3.5" plus .5" or .75" for the slat on each side. So either 4.5" or 5" total. Setting the saw at full depth will do the trick. Of course, be careful as it's your first time using the saw, always keep those fingers away from the blade, let the blade stop before reaching for it after each cut, and it can't hurt to make some practice cuts on some waste pieces of wood first to get a feel for the saw. Last, if you have clamps, you can clamp a straight edge board or 4" level to the pallet to guide the saw. In the video, he doesn't use clamps on the straight edge. Good luck!
That's why you need a bunch of them so you can salvage the good pieces. But the pallets he is using are all brand new you can tell. He probably purchased them because they are way to perfect to be free or used.
I have so many different methods of money house for someone else nahhhh I'm gonna make a whole bunch of stuff and work it until it fine garage quaility my garage will be full of practice work furniture i made so much last time it was spring to fall 🍁:)
Hi. Places that refurbished used pallets and send them down to make him look that way he can music purchase them from anywhere from five to seven dollars a piece. Lot of scrappers go around picking the used ones up and taken on the beach place to sell him for a couple bucks and they end up seeing them down and fix them and then reselling
I find very clean pallets on Craigslist (for free) pretty often, actually.. but I do agree, I noticed just how clean this one was and thought it was odd. It looks brand new. I assumed he cleaned it up a bit before recording.
It's a shame that you didn't show how or where all of the ripped timber lengths came from. That part alone would be more than 50% of the time spent on the total build. And there was some timber in the build that definitely didn't come from a pallet. Makes it hard to call this a pallet workbench.
That's the best pallett made bench I've seen,thank you for showing.I think I can handle making that,doesn't look too hard.Thanks again.
Excellent work. Best design for a bench from pallets that I have seen. I especially like the drawers you added. Very creative design. Thank you for sharing!
I made one today (6/19/23). Nice little project. My pallet was a bit rough so it took a few hours to get it up to snuff, and I skipped the drawers as I don't need them, but all in all, pretty cool, especially for free. Thanks for the great how-to video. Happy Juneteenth Day to all in the US!
Nice! I'd like to make this but I've never used my circular saw. Do I set the blade at full depth when I'm cutting the pallet in half? Thanks.
@@sheenascott5405 I did. Assuming the "2x4's" in the pallet are indeed standard 2x4's, then the total thickness will be 3.5" plus .5" or .75" for the slat on each side. So either 4.5" or 5" total. Setting the saw at full depth will do the trick. Of course, be careful as it's your first time using the saw, always keep those fingers away from the blade, let the blade stop before reaching for it after each cut, and it can't hurt to make some practice cuts on some waste pieces of wood first to get a feel for the saw. Last, if you have clamps, you can clamp a straight edge board or 4" level to the pallet to guide the saw. In the video, he doesn't use clamps on the straight edge. Good luck!
Ficou lindo e fácil!
Watched a couple of other videos before I watched this one , this is the best one
Very nice job. I am glad to see lumber repurposed, so it doesn't end up in a land fill.
its a brand new pallet
I like that a lot. Good work and good job. Thank you for sharing your video and build techniques.
That’s the nicest looking pallet I’ve ever seen
Hola soy Guillermo Villafañe de la Argentina vivo en la Rioja muy bueno muchas Felicidades
Good luck finding nice pallet wood
That's why you need a bunch of them so you can salvage the good pieces. But the pallets he is using are all brand new you can tell. He probably purchased them because they are way to perfect to be free or used.
thanks for this great idea!
It was a pleasure watching you build this. It requires a number of very accurate measurements that I am not able to make.
i like how you showed how to fill in the gaps and clean up the ends!!
Great job.. so many idea.. love the drawers
The most clean pallet I ever seen
The best pallet idea workbench yet
Just amazing sir for get the snow flaks friend👍😁👌brilliant work keep the faith uk
Very nice! 👍
Excelente trabajo 👌
Amazing work!
Simple and nice 👍🏻
Muy lindo le quedó el mueble,y que buena idea ponerle gavetas en eso yo había pensado antes que se las pusiera .
Excelente muy bueno, soy de la región del Bio Bio - Chile, por favor poner las medidas para poder realizar este fantástico mesón de trabajo 👏🏻👏🏻👏🏻👏🏻
Sehr schön!
عمل ممتاز 🎉🎉🎉
Гениально. 👍
mantepmeen gK kudu ngerbah palet👍👍👍
Great idea. A lot of missed opportunities with wood glue tho. Would’ve reduced amount of nails and screws and added strength and longevity
Can you let me know all your measurements and supplies you used, I’d love to try to make one. I don’t know much about wood working. Thank you.
Following
Огонь. Всех благ.
Oi madrinha ê l e 01bem de caminhão ❤
احبك يا الله اللهم صلي على محمد وآل محمد
Very Nice, although I would have gone for Flush Ring Pull type hanldles as I would catch my trowser pockets all teh time.
Chou de bola 👍
Great work
Great job
Brilliant!
Bravo, bravo, bravo!
Where does one find such prestige pallets from ? Asking for the world.
Pretty interesting idea, dude! Fantastic work! 😃
Stay safe there with your family! 🖖😊
I never seen pallets vlean like thi one ! Did you make it ?
Só dá certo se vc trabalhar com Serra 🪚 elétrica e de chinelo 🩴😂😂😂😂😂😂😂😂
Great video i
Apprenticeship carpenter yes i make houses yes but i mostly do these 😊
اقتصادي وعملي ومبدع ، تحياتي لك .
We buying pristine new pallets for this? How much do new pallets cost?
Wearing open toed sandals while using a circular saw next to your feet. Yeah, that's real safe. But at least he is wearing a dust mask.
❤❤❤❤❤❤❤❤
I have so many different methods of money house for someone else nahhhh I'm gonna make a whole bunch of stuff and work it until it fine garage quaility my garage will be full of practice work furniture i made so much last time it was spring to fall 🍁:)
There's no way you found a pallet that fresh and sanded
Hi.
Hi. Places that refurbished used pallets and send them down to make him look that way he can music purchase them from anywhere from five to seven dollars a piece. Lot of scrappers go around picking the used ones up and taken on the beach place to sell him for a couple bucks and they end up seeing them down and fix them and then reselling
It's bs. Plus he didn't show the giant table saw he would have to have to rip those long strips he put between the slats.
I find very clean pallets on Craigslist (for free) pretty often, actually.. but I do agree, I noticed just how clean this one was and thought it was odd. It looks brand new. I assumed he cleaned it up a bit before recording.
Typical RUclips tutorial indeed
Now show this with a normal average pallet that people will actually have access to
Very nicely done, how much would you sell that for in US dollars?
So good
awesome job what are the measurements please
I have a question, did you use a planner to plain the logs or you used them directly?
Thank You Sebab Bagi Tujuk Hajar Supaya kita faham apa boleh Kita buat
Muito bom
Bonito
Buenos días, ya hice mi mesa de trabajo, pero no le voy a poner un compartimiento debajo , como hago para estabilizar las patas y no se muevan.
Neat.
How much did the brand new pallet cost?
cute
Un lavorino di fino direi
Pobremente es genial jjjooo9mmmmmsssd🎉🍊👍
or just use the pallet?
❤
Love it
👍
Boa noite, gostaria q vc me enviasse as medidas ou algum ebook com modelos. Muito obrigado
It's a shame that you didn't show how or where all of the ripped timber lengths came from. That part alone would be more than 50% of the time spent on the total build. And there was some timber in the build that definitely didn't come from a pallet. Makes it hard to call this a pallet workbench.
Needs to get some good shoes
apakah channel nya di jual ?
Show
Walmart kit
That's what we could do for my eye table with the power if you want
thats not sturdy table with angled plank footing..waste of time
Great work
احبك يا الله اللهم صلي على محمد وآل محمد