3 Important Secrets about JBL Xtreme 2 -Low Frequency Mode, Resetting Xtreme 2, Learning Firmware V.
HTML-код
- Опубликовано: 8 сен 2024
- This video is about JBL Bluetooth Speakers' Secrets that are:
1-How to turn on Low Frequency Mode
2-How to turn off Low Frequency Mode
3-How to reset JBL Bluetooth Speakers
4-How to learn Firmware Version
P.S:: As I explained in the video, I do not advice you to use your bluetooth speakers in Low Frequency Mode...
** Feel free to ask any question, I will do my best to answer them **
DO NOT FORGET TO PRESS LIKE BUTTON AND SUBSCRIBE TO MY CHANNEL
I’m just interested in the accent lmao
LuSh x NinJaZz I’ll bet he works at 7-11 during the day
Its a turkish accent
🤣🤣🤣🤣 loool
🙂🤣🤣🤣
Yes … Dank You Veddy Veddy much
Thank you come again.
Ive got the xtreme 2 squad. Since the day it came out ive used low frequency modes and nothing went wrong. Only a bad battery
It does not mean that any time you use it, your device will be affected. It can be harmful when you listen music very loudly. In normal mode, as explained in the video, the limiter is active and it does not let the speaker to be defectively loud. But in low frequency mode, the limiter is not active and at some level there is probability that your speaker can be harmed. It is like a circuit breaker in electricity. I don't prefer to take this risk and I just want to warn JBL Xtreme users. Besides its very important side effects, some youtubers advice people to use it in low frequency mode without any warning. That's why I wanted people to learn this risk.
Wait how does low frequentie mode work? I tested it and their was litterly almost no bass
SnukkieBoy it just gets louder. It works best at louder levels. And outside it sounds best. Couse inside bass is nicee
LFM nothing do
@@luukdebeijer5062 play at max volume and you'll notice the difference.
Low frequency mode I just to turn off the bass if it starts to annoy you or at night in bed it's not harmful to the device! Xtreame 3 firmware is vol+ and vol- for the read out and low fq is Bluetooth and vol - but honestly why you would use it on a daily basis is beyond me it just makes it sound like an old sony speaker!
Its better to use low frequency
When your playing bass boosted music
But not advisable becoz it can damage your woofers
No man always use bass mode and play it a loud as possible
Nice I notice playing without bass messes it up makes it less loud everytime u use it selling for £120
Would be good if you shut off the music when you are giving instructions. First secret, low frequency mode. Second secret, reset speaker, third secret, activate what? Different firmware-
Nothing said about the Different firmware, some info on that would be useful
One of my tweeters ripped (the bouncing rubber on the sides) after playing it in this mode all night it’s makes them go crazy bouncy 😂
He told you so… 🤣
I understood about 4 words in this entire video.
Hahahahaha
You should train your English a bit more then
All i understood is jbl xtreme 2
I thought I heard him say something about a free blizzard at DQ 😀🤷🏼♂️
just arrived 2 extreme 2's can not connect via app and if i connect+ them in pair it is not in stereo...what should i do?
Hard reset your JBL Xtreme by below video, also in your cell phone's Bluetooth connection settings, remove (forget) JBL Xtreme 2 connection, close and re-open your cell phone, than try to re-connect your xtreme 2 to your cell phone and check it whether it works or not.
To hard reset watch below video:
ruclips.net/video/jCNpavfu_Hc/видео.html
Great video
Abi Türk olduğuna yemin edebilirim
harbi la fsgvfykkj
What does the different firmware do?
It is highly recommended that it is better to use the latest firmware everytime for every devices. You can update your firmware through your cellphone. Latest firmwares improve the performance of the item and fix some bugs.
How do i know if frequency mode is on or off
Actully nvm its better when its on lfm
Do you know if it is possible to prevent from others connecting to the speaker ? And only one device connected to it ?
After I make the reset it doesn’t open again. Can you explain that?
My xtreem 2 Before this trick working🙂🙂🙂 but after update not work☹️☹️☹️☹️
Any trick??
Plz reply
Plug it in and turn in on will anlo rest that mode your in which is off mode the plug rests it. Hope that helps
@@MarkBrown-ku5jx not working
Next update date??
How do I know if my jbl is in lfm I don’t remember I used befor
Just reset it and everything will be back to normal
Cual es la version de actualizacion
I wouldn’t use it I have on my old jbl xtreme and it messed it up all through low frequency mode is super fun because of the bass just don’t do it if u don’t want to ruin a expensive and extremely good speaker
Had the hardest time understanding him 😴 Subtitles would have been great!
Why not to use lfm? I use it all the time. It came with it on. It doesnt harm the speaker and it at least has some bass.
It does not mean that any time you use it, your device will be affected. It can be harmful when you listen music very loudly. In normal mode, as explained in the video, the limiter is active and it does not let the speaker to be defectively loud. But in low frequency mode, the limiter is not active and at some level there is probability that your speaker can be harmed. It is like a circuit breaker in electricity. I don't prefer to take this risk and I just want to warn JBL Xtreme users. Besides its very important side effects, some youtubers advice people to use it in low frequency mode without any warning. That's why I wanted people to learn this risk.
@@TechAbetSolutions yeah.... I kinda tried without and it got even louder. But then the bass isnt good at all. I prefer the lfm but the speaker isnt harmed yet. I have been using it for a year now and its been aleays on max or at least 75%
Same i got lfm out of the box too i think cause pressing the buttons makes the bass lower
normal mode bass so bad on some normal people music, just for bass and high freq songs jbl is good
It didn't came with it turned on, it actually makes bass worse. Only low notes are played well, low, mid and upper bass. No weird bass boosted songs, try rebasses of songs and you'll see.
Why on me jbl extreme 2 not working anymore low Frequency mode? 😭
Plss help guys
How can I tell which mode I am in? Does a reset turn the speaker back to normal mode and not LFM?
Thanks!
Sander if you have youre speaker on normal. You hear a dun dun sound when u max the volume out. Than it is in normal mode. But if u hear no dun dun than it is most likely in lfm
If you are not sure about the mode, I advice you to hard reset it.
ruclips.net/video/jCNpavfu_Hc/видео.html
Just turn it off then back on
@@TechAbetSolutions No need, restarting is more than enough. People make such dumb mistakes and I can't bear reading them.
@@proxyhx2075 so how do i know what mode am i in
I only use that mode for parties 😉 and it does get loud
Why is there LESS bass in the low frequency mode in this video? I think you must have messed it up and actually turned it off instead of on...
I do not use professional or high quality recorder, so sound may be different than the original one. Besides this video does not aim to show the sound differences. I am only trying to show how you can access 3 secrets about JBL products.
@Water Bass Tester yup on max volume it has LOUDER bass. Not more bass
Lfm isn’t Bass it just makes the woofers move Moree then they should it’s not tru Bass
Would be nice if you could understand what he’s saying
Does resetting mean that lfm is turned off??? Please let me know!
That's true but just to be sure try hard reset. You can watch below video to learn how to do hard reset:
ruclips.net/video/jCNpavfu_Hc/видео.html
@@TechAbetSolutions thanks so much! You're the man
My JBL xtreme 2 is not doing anything when I press Bluethoot and vol down buttons for more than 10 seconds. I have a problem, on low volume the speaker is going into some kind of sleep mode, so I thought that enabling/disabling LFM would help, but I can't do it.. Could anyone help me?
they patched it
made no difference but it could be the mic ?
yes it's the mic
Y did they make it a function? And it sounds a lot better.
sir may i help me i want to update my firmware but its failed what can i do to fix this?
low frequency means like high volume !!! or low volume !!! and can u please fully advice about xtreme 2 cz i ordered xtrm 2 from amazon so please advice me how to care this speaker ... because this is so expensive for me and i don't want to loss this... so can u pls tell me long term review like 1 year 2 year and 3 year thank you
This is a very good bluetooth speaker. It won't create any problems for you in the near future as long as you good take care of it. I advice you to:
1-Not to use it in low frequency mode.
2-For its battery life, don't keep this speaker attached to electric with its charger. Charge it, than unplug it from the charger, use it until you get the red light on the battery indicator
3-Do not apply any changes depending on youtubers advice unless you are 100% sure. There are many videos on the internet that cause infollution.
4-Do not listen the music with very high capacity voice (95% or above) all the time.
I have this 1 and a half years. I listen to music with a lot of bass. (rap or trap). And the speaker is exactly like when i first used it. The bass is greate and remains the same. The volume is the same too. And the battery life is greate because i use it for 3 days and then it shows the red dot(low battery). It is greate but i used low freq only 10 times. But i use a bass boost app that makes the bass 5 times louder. Thats not good for the speaker i think but i like it(and it still is like a new one). Also yesterday i got outside with this and started rainning. It was wet but still ok. Remember it is Rain proof but you can't put it on water. (I AM TALKING ABOUT XTREME 1)
why from my jbl boombox sound comming just from one side? and its like that Seans I get it :(
Then it’s broken lmao
Ppl cya read it's volume down and Bluetooth bottom
It does not work help
So is lfm supposed to lower the bass or boost it?
Why do not use in this mode
leant of 'low freq mode' after i updated firmware to 2.6.0. nope seams to not work. i fear the "bug fix" update removed it doh! wanted to see if it disables dynamic range compression for better quality at low levels where bass/xmax limit of drivers not reached.
Same 2
Me jbl xtreem 2 Before working 🙂🙂🙂🙂🙂
After update not working ☹️☹️☹️☹️☹️☹️☹️
Guys why are you Upgrading the fucking Firmware?? Its just removes the Secret funcions
why would it have low frequency mode if you can't use it ?
You can use it, but with caution. If you use it with very high volume, than it may be harmful to your speaker
@Bass Tester229 engrish
Io ne ho due e lo regolo tramite equalizzatore del telefono perché ho notato che i bassi sono troppi e con equalizzatore del telefono parto con le frequenze da 125 hz in.su..mai a 63 hz
UPS i tryed low frequency mode on max volume on my flip 5 (IT broke :( i forgot to watch this video.
Why did it break?
IDK it was a little old so maybe that.
why i have static noise when low volume and then no volume
Try to hard reset the speaker with the help of below video:
ruclips.net/video/jCNpavfu_Hc/видео.html
If it does not work, than you should have mechanical problem. The reason may be:
1-You may used your JBL over powered and this may cause one of or both of your speakers to be blown.
2-There maybe loose contact problem inside of your JBL
If you still have warranty send it to the JBL.
@@TechAbetSolutions i send they nothing find
Porque no lo recomiendas usarlo en modo baja frecuencia?
Puedo causar daño a la bocina si la está usando mucho en este mode
I was expecting the bass to sound better in now frequency mode, but it actually just boosts the highs more and lowers the bass, exact opposite. Unless it is now shipped with low frequency mode on from the factory. Mine came with firmware version 2.4.0 and there's no upgrade available at this time.
Mine has still 2.3 for the firmware and there is no upgrade available right now for regular users. I guess 2.4 is at the trial mode now. For cancelling the low frequency mode, you can hard reset (+ sign and play button for 10 seconds) your JBL to have normal mode.
Yup just got mine and the bass is louder on the normal mode
@@AXELVISSERS same
my guess is it disables a high pass limit on bass and other filters. so if u send sub bass to it, it will play it. in normal mode it boosts bass but cuts and limits sub bass with tricks and reduces highs to better match loudness of lows.
Me I have Orion Bluetooth speaker it doesn't switch on but it's charging a battery am struggling
It may have a problem with the power switch. It is better for you to take it to mechanics.
Can u restart the frimwere
The volume up and Bluetooth thing isn’t working. Anyone else having this problem?
That didnt work for my JBLExtreme 2 speaker too. The Bluetooth and up volume.
Probably because it's bluetooth+volume down
@@cloroxbleach5771 its lfm
whats your fimrware version? seams newer firmware has it disabled :(. did u update firmware?
@@nkaujthao3781 whats your fimware version?
Merhaba, şu modlarını birde Türkçe açıklayabilir misiniz rica etsem. Hiç bir yerde doğru düzgün bir açıklama bulamadım. Hoparlörü yeni aldım ve test ettiğim yerdekinden daha az ses çıkışı var. Bunu yükselmek istiyorum. Ayrıca diğer tüm modlar hakkında da bilgi verirseniz çok sevinirim.
Merhaba gerek bu videoda gerekse de aşağıda linkini attığım videoda JBL Xtreme 2 ile alakalı (bu ayarlar diğer bir çok bluetooth hoparlörde de çalışır) pek yaygın olarak bilinmeyen özellikleri anlatıyorum. Bunlar:
1-Low Frequency Mode (bluetooth tuşu ile ses düşürme tuşuna 10 saniye bastığınızda low frequency mod aktif oluyor): Bu modu insanlar kullanıyor ama tavsiye ettiğim bir özellik değil. Bu modda bluetooth hoparlörün daha fazla ses çıkartması için zorlanması söz konusu. Bir nevi hoparlörlerin zarar görmemesi için koyulan sigorta bypas ediliyor. Uzun süre bu modda yüksek sesle kullanırsanız hoparlörünüz zarar görebilir.
2-Soft Reset (basit reset): Bluetooth ve ses arttırma tuşuna 10 saniye basınca aktif olur. Low frequency moddan çıkar ve hoparlörü kapatır.
3-Hoparlörde yüklü yazılımın versiyonunu öğrenmek: Ses düşürme tuşu ile JBL bağlantı tuşuna aynı anda 10 saniye bastığınızda cihaz size yüklü versiyonu sesli olarak söylüyor.
Aşağıda linkini verdiğim videoda ise kısaca 2 tane daha özellik anlatılıyor:
ruclips.net/video/jCNpavfu_Hc/видео.html
1-Hard Reset veya full reset de denilebilir (ses arttırma tuşuna ve oynat (play) tuşuna aynı anda 4 saniye basıldığında olur): Bu yapıldığında cihazın ayarları tamamen sıfırlanıyor. Tanımladığınız ve bağlantı yaptığınız tüm cihazlar hoparlörün hafızasından siliniyor. Ayrıca tekrar hoparlörün telefonla eşleştirilmesini anlatıyorum
2-Low frequency moddan çıkılıp çıkılmadığından emin olmak için hard reset yapılması gerektiğini belirtiyorum.
Herhangi bir sorunuz olursa yardımcı olmaya çalışırım.
TechAbet Solutions teşekkür ederim videoların her ikisini de izlemiştim. Ancak İngilizcem olmadığı için, çevirilerdende tam olarak anlayamadığım için detaylarını yazarak öğrenmek istedim. Aslında merak ettiğim hoparlörün sesini daha da yükseltebilmek için ne yapmak gerektiğini öğrenmekti. Sanırım bu sadece low frequency özelliğini açarak oluyor. Başka bir yöntemle yani zarar vermeyecek bir yöntemle sesini yükseltmemiz mümkün mü?
I had a jbl xtreme 2 and i worked but i send it back now i buyed another and it dont work anymore
New jbls doesnt have anymore
How off this Mode?
i am a cybernetic organism, model 101
Dont work
Oh ding ding
Someone should hack the firmware to reduce the limmiter effect
But that is not advisable as explianed in the video. It is like circuit braker for electricity
@@TechAbetSolutions might try adding a boost converter to the battery and have it hooked up to the dc port so I could get max power
@@tlrautomotive8410 I am not expert on this subject, I am just a regular user but looks like you have the solution, worth to try for anyone who knows what he is doing...
Why would he talk as the loud as music is playing
Yeah I’d probably never go to 100% on lfm bass boosted
plzzz how to turn of lock mode
Yes low frequency mode i don't like but max volume it's okya
that can break your speaker because in low frequency mode there’s no limiter
Its only turning the dsp on n off
It’s the testing mode
know anymore? did it disable the dsp eq and compression, etc?
Afryka roses the mode like me and ogier but only you kot efrytine ha ha ha
Dayı kesin Türk ya. Bu İngilizceyi 100 km'den tanırım.
Beğeniyi ben yaptım. İngilizlerin aksanı Amerikalılardan, Amerikalıların ki Avustralya'lılardan farklıdır. İnsanların aksanları nereden geldikleri hususunda bilgi verir. Yine bir Arap, Rus, Çinli, Hintli veya Afrika'lının aksanı ve hatta konuşurken kullandıkları kelimeler bile nereli olduklarına dair ipucu verir. Yalnız ait oldukları dil grubundan olsa gerek Türklerin telaffuzları diğerlerinden tamamen farklı. Bu arada çok şükür ki Türk'üm...
@@TechAbetSolutions dedim abi tanırım diye. 😃 En yakın arkadaşımla en büyük kavgalarımız genelde bu yüzden oluyor. Mesela 20 senedir Amerika'da yaşayıp ciddi para kazanan ve çok akıcı konuşan bir iş adamı için adama bak 20 senedir Amerika'da çok kötü konuşuyor gibi eleştiriler yapıyor. Sanki zorundaymış gibi. Sanki adam orada doğdu büyüdü. Bu konu çok uzun ama kısaca yabancı dil konuşabilmek ile yabancı dilin köpeği olmak arasında fark olduğunu ve yabancıların Türk gibi konuşması gibi bizim de yabancılar gibi konuşmamıza gerek olmadığını düşünüyorum. Ayrıca video çok yararlı oldu. Teşekkür ederim.
Why is it dangerouse if you put it in low frequentie
Beacuse we should buy sony xb43😂
@@aztech6436 not at all lol
Because It deactivate the DSP protection so the speaker go full power without any protection and honestly it makes your JBL sound like a cheap Chinese speaker hahaha
100%LFM is the full power for the woofers so the woofers are not realy damaged it's not a Problem for the woofers in the LFM
Rough english
how to get charge 3 low frequency mode off
You can use the same method as xtreme 2
wait how to i know if its in normal frequency
both the buttons lighted up
doed that mean its in normal mode?
its sounds louder
I really heard no difference
Thats because its on a recording, in person you would
Lfm is just debug mode
No lfm on firmware 2.6.0
Is it possible to go back to the older firmware
@@AhmadKhan-ow9qh no ):
Yea fr I was just tryna switch modes n shi wasn’t workin so I’ve been lookin every we’re for a vid saying it doesn’t work anymore n now I got my prof tnx g
How
Doesn‘t work anymore
Really
@youtubeblonde3958how