Hello, i just did this battery replacement and it works! I will give some more info. I replaced the Lipo for the LG INR18650-HG2L 3000mAh - 20A which costing around 50% less than the brown ones in the demo. And another very important issue i was dealing with, my battery pack was slightly to big for its chamber caused by wiring. Therefor the lower lid could not seal properly and AIR was leaking when playing music loud. So resonance distortion was the result. I almost gave up, thinking my speaker was blown. So keep in mind the casing must be sealed completely!!! I used EPDM kit at the base of the inlet cable assy battery pack. Succes everyone, succes Léon
@@ballessss well have you ever tried doing something like that? I sometimes hate clips because it's really tight and feel like it was gonna break when dissasembling something
Thanks to you. I understand how to use the bms on this device. Every one needs to not throw away their battery powered items but to repair them their self. "Gear show" shows how we all can make a difference.
I did the same with my xtreme except that I used Samsung Lithium batteries. I like the Panasonic ones though. This was a fun project for me at the time. Great work on yours too.
Those Batteries need to be isolated with soft material. Otherwise the sound will be soon or later bad because of their vibrations mate.😊 Otherwise good job👏🏿👏🏿
Dude, just replaced my old tired, empty batteries, Can't thank enough. Jus hope my batteries purchase was a good one. Anyways, if/when change is needed again, I'll be ready!
Great job. One thing I would like to ask why we should use 2 yellow cables to join the pcb (BM) to the battery. Could we simply join the two BM points on PCB and use a single cable to connect it to the battery?
Try answering some of these people's legitimate questions and concerns! Not just thanking people for stroking your ego. Or don't even make these videos if you can't explain yourself.
You haven't put back the rubber gasket. Not only this use for waterproof but also help to airtight the internal to produce more vaccum to help create more bass in low frequency. Thats a very useful one. The JBL portable series are marvelous engineering of speakers.
Great job, but be careful when screwing the driver, you wouldn't be the first who let the screwdriver slip and puncture the foam of the speaker (don't ask me how I know...) 😅
Thank you very much for such a great detailed instruction. I can disassemble the device but I cannot solder. I never had to deal with soldering. Is there a direct replacement of Li-Polymer battery?
Yes, here's a battery available on Amazon www.amazon.com/dp/B082V93V1J 5000mAh Battery Works with JBL Xtreme Extreme Portable Bluetooth Speaker 5000mAh Li-Polymer
For us that we do not own any equipment, how can we join the four 18650 cells at home? I mean, I can get a soldering iron, but that machine you use to connect the terminals I am guessing it is pretty expensive.
Love the video... I'm not sure the average Joe can do this repair. And even though the battery exchange is really the most technical part of this, I'm not sure a local electronics shop would b worth the money they would charge to do it. Obviously it's gonna be less expensive to change the battery vs buying a new speaker, I would just need some help doing the battery switch itself.
Although it's awesome that he replaces the cells themselves, new (pre-wired) battery packs are also freely available online! This means you only have to do the screws and clips, the new battery will look exactly the same as the old one upon removal and simply snaps into the socket.
@@Jwk2211 the point is: the factory battery is Lithium Polymer this pack he's building is Lithium Ion. Lithium Ion is a safer battery, and does better with charge discharge cycles than LiPo. I personally don't have the ability to build a Li Ion pack, so I bought another LiPo from Amazon. Would be nice if someone pre-made ion packs and sold online 😉
I'm a bit suprised, i did many conversions like this, but the 18650 cell pairs did not fit inside right away, without some dremeling. Also, if you planning on using the speaker for years to come, you should definetly put in a 2s balancer. The lack of it, in the original bms is what causes the lipo cells to die so soon.
@@gartheligon140 @Garth Eligon It is a little circuit, that is either a separate circuitboard that you can buy and connect parallel to the existing bms board, or it is a function sometimes built into the bit more expensive bms circuits. Its function is exactly what its name is suggesting: it equalizing the cell voltages in a battery pack when the pack being charged. The "2s" simply means how many cells it is design for, in this case 2s means 2cell. Without a balancer, lithium cells tend to drift from each other in voltage, and over time, when charging the pack, one cell gets overcharged(and the bms shuts the pack down to prevent an explosion, while the other cell is far from being fully charged). And when discharging the less charged cell will depleat quickly, and the bms will again shut the pack down suddenly, to try to prevent the depleated cell from damage.
Nice upgrade. I hate that startup/shutdown sound. It's silly and annoying. You can turn it off by using the JBL app. I've done on mine - now it's quiet.
Good job! But I need some clarification. I've seen different schemes on the same issue, there minuses were connected to BM and B- respectively... Pluses were connected to B+ and another BM. Also only two minuses were connected in parallel (for each battery). In your example you have connected all minuses in parallel and then to BM (one BM left alone). Why so different? I bought another BSM, since I'm not sure that stock is still alive. But that new BSM has 4 contacts: B+, B-, BM1 and BM2. So I wonder how to connect it to batteries. Thanks
You can increase the capacity to 10000 using 21700 batteries (higher price) instead of 18650. Maybe a modification is needed but from the looks of the compartment, I think it can fit in nicely.
Awesome. But the soldering is still not good. In some places I see poor contact, the wire barely touches the plate and the solder does not spread. Try using a flux.
Did this 2 years ago... But never ever it will fit like you shown or the shown xtreme isn't sealed anymore. The passiv speakers loose a lot of power if this case isn't correct sealed. I had to remove a bit of cover both sites to get the seal close enough together with no little air gap. Other option would be to seal the hole and let the encloser with this gap.
Bro, I'm having a fake JBL charge 2+. I used it in my school dance practice for like 3 years. And suddenly one day it stopped working. When I pressed the power button, it was dead. But when I keep for charging, the speaker will not work but the light comes on. What should I do?
Hi, I'm thinking of doing the same. Is the battery indicator working fine? I have less knowledge about how the battery indicator works. Does it measure the new battery installed capacity, or still consider the old one which it was programmed for?
U blind bro, check 2 parrallel two in series 2x6.7amps=53.6watts, if your talking li-ion laptop cells, they provide .7amps continous, you can get 2 amps peak discharge but audio quality suffers due to voltage drop on cells cant handle. Also, series cells needs balancer charger/discharge otherwise one series cells dies because of reverse charge
Он не боится, что со временем может спалить или процессор зарядки или аккумы просто перегреются и взорвутся, как перезрелые помидоры ? Защита и ток зарядки рассчитаны на Li-po аккумы.
Go with li ion batteries from a Tesla model 3, they are 4800mah each and if you make it like this battery then it will be 9600mah and they are 21700 size so they will fill up the battery compartment but it might need slightly modified to fit them. batteryhookup.com has the Tesla batteries for around $3.50 each.
Do you have, (or know any videos on How to get an Altec Lansing bluetooth speaker apart? I have 2 of them, one is their "Baby Boom" model, it has no sound and painfully short battery life. Being a $20 unit, I want to learn on that; the other is their "Super Lifejacket" which does work, but no matter how long I charge it, the battery never indicates being fully charged, (the red LED never goes out).
Hello, i just did this battery replacement and it works! I will give some more info. I replaced the Lipo for the LG INR18650-HG2L 3000mAh - 20A which costing around 50% less than the brown ones in the demo. And another very important issue i was dealing with, my battery pack was slightly to big for its chamber caused by wiring. Therefor the lower lid could not seal properly and AIR was leaking when playing music loud. So resonance distortion was the result. I almost gave up, thinking my speaker was blown. So keep in mind the casing must be sealed completely!!! I used EPDM kit at the base of the inlet cable assy battery pack. Succes everyone, succes Léon
hi my jbl extreme battery dead
The confidence you have while you disassembly that device is astonishing. I'd be afraid of breaking clips and stop immediately.
He is not a coward
@@ballessss well have you ever tried doing something like that? I sometimes hate clips because it's really tight and feel like it was gonna break when dissasembling something
It looks like the video was sped up a bit so his movements looks fast.
There is also a possibility that it's not his first rodeo.
Experience is the best teacher
Thanks to you. I understand how to use the bms on this device. Every one needs to not throw away their battery powered items but to repair them their self. "Gear show" shows how we all can make a difference.
Yes indeed
Yeah totally agree, too bad some companies make it impossible to repair
Bms' WTF
@TheNigaHigaFan4Ever "coughs" Apple
Please do more such videos.. you are the Battery King
Yes indeed
I did the same with my xtreme except that I used Samsung Lithium batteries. I like the Panasonic ones though. This was a fun project for me at the time. Great work on yours too.
Which type of batteries brother
I like your videos because I can feel the love and respect you give to all the items you repair.
As if they were alive.
Yes indeed
Yogkgk
@@sitihalifah7402 truja bruta
Those Batteries need to be isolated with soft material. Otherwise the sound will be soon or later bad because of their vibrations mate.😊
Otherwise good job👏🏿👏🏿
Thanks a lot, I did that on my Xtreme and worked PRETTY FINE, about 11 hours duration using high quality cells.
Qual tempo de carregamento?
@@eltonsilva5922 nunca medi, deixo carregando enquanto durmo
Muito obrigado! Feliz natal
you should add foam for the battery compartment, so they dont rattle while playing music
Or even moving the unit around, would imagine it would clunk around as well. Maybe that part/addition just wasn't included in the video.
*rolleyes*
Agreed
@@macaroni2415 Looked like it was in there firm and tight anyway.
ruclips.net/video/shkY7Q_Wmus/видео.html
Estupendo video sobre el cambio de bateria de este JBL Extreme de tipo Lipo a Li-ion, respetos y saludos desde Venezuela.
💯💯💯💯👍👍👍👍👍🤘🤘🤘🤘🙏🙏🙏🙏💯💯💯💯
Hno. Venezolano, tenes idea del porqué cambio las pilas de color marrón, a las de color verde????
Desde BsAs. Argentina, un saludo
@@cleofec.7585 por que a bateria verde tem mais capacidade
@@cleofec.7585 Yo también me quede con el interrogante.
Y todavía no se porque.
Cómo determinó que referencia de baterías le coloco o cuáles son esas verdes que le coloco ?
I've done it too, it works way better than the stock battery 😎👌
Yea I put 4 3000mAh 18650s into my JBL Xtreme 3 because the stock batteries sucked
Dude, just replaced my old tired, empty batteries, Can't thank enough. Jus hope my batteries purchase was a good one. Anyways, if/when change is needed again, I'll be ready!
Great video! I love it when you branch out! 🤩
Yes indeed
Thanks, I did this to my Speaker too and it last much longer now than the stock battery.
Great job. One thing I would like to ask why we should use 2 yellow cables to join the pcb (BM) to the battery. Could we simply join the two BM points on PCB and use a single cable to connect it to the battery?
I did nearly the same with mine, but i used again a lipo. Great vid!❤️👍
Well done, that Lipo is a better choice.
What site can I order the batteries from ?
I own a dindinmodern brand speaker. Honestly, it's really good. I prefer his bass. I've been using it for a year so far and it deserves my praise.
New juice for blue tooth! .... hey that rhymes... great Job Gear Show!!! Warm regards!
thanks, I was afraid to use the li-po pcm and transfer it to the li-ion battery, but now I consider it an option.
Thank u, this is exactly what I need to do with my Harman Kardon speaker👌
You're welcome, I'm glad it helps you!
Try answering some of these people's legitimate questions and concerns! Not just thanking people for stroking your ego. Or don't even make these videos if you can't explain yourself.
Love the way you regonize your working place so nice. ^_^
You haven't put back the rubber gasket. Not only this use for waterproof but also help to airtight the internal to produce more vaccum to help create more bass in low frequency. Thats a very useful one. The JBL portable series are marvelous engineering of speakers.
I put it back, but I don't firm. Anyway thank you for suggestion!
Qe CD v
The one battery pack you made in the start of your show was not the same as the battery pack you put at the end of your show Sir! Why is that?
Great job, but be careful when screwing the driver, you wouldn't be the first who let the screwdriver slip and puncture the foam of the speaker (don't ask me how I know...) 😅
Okay, thank you for reminding me :D
I would use my fingers to surround the screw driver and hold it in place because it's better safer than sorry😂
Hi, I am from Indonesia, I Like your video
Yes indeed
Thanking you bro...from this video learn something new....
and effective? did it last longer than the previous battery??
if you have good soldering skills something like this would be easy great job well done
JBL7 de boa tarde vou para casa de mãe e esqueci com
Thank you very much for such a great detailed instruction.
I can disassemble the device but I cannot solder.
I never had to deal with soldering. Is there a direct replacement of Li-Polymer battery?
Yes, here's a battery available on Amazon
www.amazon.com/dp/B082V93V1J
5000mAh Battery Works with JBL Xtreme Extreme Portable Bluetooth Speaker 5000mAh Li-Polymer
GRACIAS, Saludos de Lima, Perú
有一种干冰清洗机，接到空压机上，混合干冰气体之后喷出来，可以清洁电子电路和汽车油泥，有条件的话试试那个？
Great as always
Yes indeed
No freaking way! This is awesome..
Yes indeed
For us that we do not own any equipment, how can we join the four 18650 cells at home? I mean, I can get a soldering iron, but that machine you use to connect the terminals I am guessing it is pretty expensive.
What a masterpiece of art 👍
I PREFER 10000 TIMES BUY OTHER ONE. ANYWAY IS AMAZING YOUR VIDEO.
Hi sir I am your big fan
Love from India
I really like when you do the battery replacement like this, could you do more please
Give heart ❤️ broo!!!
Very nice, but to be honest it seems like a lot of work. So i'll just throw mine in the bin and buy another one if you don't mind. 😊
Sell it or give it away
Love the video... I'm not sure the average Joe can do this repair. And even though the battery exchange is really the most technical part of this, I'm not sure a local electronics shop would b worth the money they would charge to do it. Obviously it's gonna be less expensive to change the battery vs buying a new speaker, I would just need some help doing the battery switch itself.
Although it's awesome that he replaces the cells themselves, new (pre-wired) battery packs are also freely available online! This means you only have to do the screws and clips, the new battery will look exactly the same as the old one upon removal and simply snaps into the socket.
@@Jwk2211 the point is: the factory battery is Lithium Polymer this pack he's building is Lithium Ion. Lithium Ion is a safer battery, and does better with charge discharge cycles than LiPo.
I personally don't have the ability to build a Li Ion pack, so I bought another LiPo from Amazon. Would be nice if someone pre-made ion packs and sold online 😉
@@Jwk2211Where can one find such a thing?
Love from india,,,😁😁
Good job, you need hear music while restore the other tools.
Yes indeed
I love your channal 🤩🤩😍😍😍😍😍
Awesome video..Thank you for sharing 💙💙💙
Very Good Video 👌 Good Work.
I have a question , how many mHA have the selfmade Akku Pack and how many mHA have the Original?
Nice job! But do I need to replace the charger or can I use the original charger? Inscribed on the original 19v And in these batteries is it 7.4v?
Isn't Li-po max voltage something like 4.35V? It could overcharge these cells. Is it still alive?
Thanks for this vedio 👍👍🙏🙏😎😎
Nicely done 👍👍👍Thanks for sharing
Yes indeed
I didn't need to watch this but watched it anyway.
良い仕事の兄弟、あなたの仕事は本当に素晴らしいです。❤️
Omg bro you are a GOD 👏🏻👏🏻👏🏻👏🏻
I'm a bit suprised, i did many conversions like this, but the 18650 cell pairs did not fit inside right away, without some dremeling.
Also, if you planning on using the speaker for years to come, you should definetly put in a 2s balancer. The lack of it, in the original bms is what causes the lipo cells to die so soon.
What's that?
What is a 2s balancer?
@@gartheligon140 @Garth Eligon It is a little circuit, that is either a separate circuitboard that you can buy and connect parallel to the existing bms board, or it is a function sometimes built into the bit more expensive bms circuits. Its function is exactly what its name is suggesting: it equalizing the cell voltages in a battery pack when the pack being charged. The "2s" simply means how many cells it is design for, in this case 2s means 2cell.
Without a balancer, lithium cells tend to drift from each other in voltage, and over time, when charging the pack, one cell gets overcharged(and the bms shuts the pack down to prevent an explosion, while the other cell is far from being fully charged). And when discharging the less charged cell will depleat quickly, and the bms will again shut the pack down suddenly, to try to prevent the depleated cell from damage.
@@M0rtin67 Thank you, now I know. 👍👍
What’s a good site to buy the batteries from ?
QUE SE VE FÁCIL HACER LO QUE TÚ HICISTE.
FELICIDADES.
SALUDOS DESDE CHILE.
Ş
SUPER!!!!
Yes indeed
Would it better or safer to discharge the batteries before tack welding then together?
yes, you must discharge them up to 3.6v to solder safely. with them loaded there is risk of explosion
Nice upgrade. I hate that startup/shutdown sound. It's silly and annoying. You can turn it off by using the JBL app. I've done on mine - now it's quiet.
I believe this reaper
Love work like this now I know great 👍
Amazing sir
High power my step mom hehe now spoiler Reddy assistant woo dam you making I love it 😍
Thx for uploading beyond drill machines
Try factory reset,will solve lot of issues ,just find right method , different buttons combination for JBL series like 2,3,4,5, etc
I think he fell in love with these 18650 ,so he's converting every electric product's battery to this.
Gayet başarılı bir çalışma olmuş elinize sağlık. 👍
Good job! But I need some clarification. I've seen different schemes on the same issue, there minuses were connected to BM and B- respectively... Pluses were connected to B+ and another BM. Also only two minuses were connected in parallel (for each battery). In your example you have connected all minuses in parallel and then to BM (one BM left alone). Why so different? I bought another BSM, since I'm not sure that stock is still alive. But that new BSM has 4 contacts: B+, B-, BM1 and BM2. So I wonder how to connect it to batteries. Thanks
This really confues me too.
Great video. Can this speaker work without battery , only with charger connected ?
Great video...can I use a 7.4v 10000 mah battery for my jlb..??
Super Material!👍 Very handy!👌
excellent project👍
Yes indeed
That welder! Do You have instructions of how you do something like that? Too expensive where I live
Yeah, This one is a good build, is professional enough, but very cheap and easy to make.
ruclips.net/video/8bxBGA0L8NQ/видео.html
￡32.69 25%OFF | DH20 Pro Adjustable 9 Gears Mini Spot Welding Machine With Quick Release Pen Nickel Plate 18650 Battery Welder Spot Welder
a.aliexpress.com/_uX2d0m
LG HG2 ! GREAT CHOICE!
Yes indeed
I wish we could swap bigger batteries for smartphones at least as easy as this
You can increase the capacity to 10000 using 21700 batteries (higher price) instead of 18650. Maybe a modification is needed but from the looks of the compartment, I think it can fit in nicely.
These batteries are 3000mAh each so all of them together are 12000mAh. More than 10000 so that's good too.
@@peterparisopoulos9968 it's 2S2P configuration so 6Ah 7.4Vnom
@@peterparisopoulos9968 wrong
Awesome work thanks 🙏
EGJ Extreme Good Job!
Thank you RUclips for recommend me always think about this love JBL Xtreme 1 it's error battery nowadays
Ressuscitei minha charge 3 assim! Muito bom! não deu para fazer com meu drone por conta de espaço....
Awesome. But the soldering is still not good. In some places I see poor contact, the wire barely touches the plate and the solder does not spread. Try using a flux.
Thanks 👍👍😌
عمل رائع شكرا لك اخي
Very nice video 👏❤
Did this 2 years ago... But never ever it will fit like you shown or the shown xtreme isn't sealed anymore. The passiv speakers loose a lot of power if this case isn't correct sealed. I had to remove a bit of cover both sites to get the seal close enough together with no little air gap. Other option would be to seal the hole and let the encloser with this gap.
Of the battery brands you use, which are the best?
I will do it exactly the way you did it. Thanks
Too Good Brother
أنت فنان بمعنى الكلمة
Gacor ya boos tahan lama mangkinan karena di ganti baterai
This upgrade works also for the JBL Partybox 100?
How is the water prof ness of the JBL now.
It was never waterproof...... its a splash proof speaker.
Not good.
Bro, I'm having a fake JBL charge 2+. I used it in my school dance practice for like 3 years. And suddenly one day it stopped working. When I pressed the power button, it was dead. But when I keep for charging, the speaker will not work but the light comes on. What should I do?
Hi, I'm thinking of doing the same. Is the battery indicator working fine? I have less knowledge about how the battery indicator works. Does it measure the new battery installed capacity, or still consider the old one which it was programmed for?
Excellent
Is that the same as lowbat?
Woow 👌👍,nyimak malam bosquu
Lithium polymer chemistry vs lithium ion. Check discharge rate of the batteries, might not be able to deliver enough current for low bass
U blind bro, check 2 parrallel two in series 2x6.7amps=53.6watts, if your talking li-ion laptop cells, they provide .7amps continous, you can get 2 amps peak discharge but audio quality suffers due to voltage drop on cells cant handle. Also, series cells needs balancer charger/discharge otherwise one series cells dies because of reverse charge
انته الافضل دائما
Он не боится, что со временем может спалить или процессор зарядки или аккумы просто перегреются и взорвутся, как перезрелые помидоры ? Защита и ток зарядки рассчитаны на Li-po аккумы.
And is it possible to insert a higher capacity battery and where can you buy a battery?
Yes it's possible use higher capacity cell but consider the size so they can fit under the compartment easily
Go with li ion batteries from a Tesla model 3, they are 4800mah each and if you make it like this battery then it will be 9600mah and they are 21700 size so they will fill up the battery compartment but it might need slightly modified to fit them.
batteryhookup.com has the Tesla batteries for around $3.50 each.
Do you have, (or know any videos on How to get an Altec Lansing bluetooth speaker apart? I have 2 of them, one is their "Baby Boom" model, it has no sound and painfully short battery life. Being a $20 unit, I want to learn on that; the other is their "Super Lifejacket" which does work, but no matter how long I charge it, the battery never indicates being fully charged, (the red LED never goes out).
Hi, Nice work!👍
Комментарий в поддержку канала и видео, а также труда мастера