How to replace Sony WF-1000XM4 batteries.
HTML-код
- Опубликовано: 4 окт 2024
- Replacing Sony WF-1000xm4 batteries. The batteries were bought here:
$13.55 50％ Off | 2PCS ZeniPower replacement CP1254 1254 for Sony WF-1000XM4 XM4 Bluetooth Headset Battery 3.85V 75mAh Z55H
a.aliexpress.c...
Loctite extra time control was only available at a local Jewel Osco.
The background music is from:
Music from #Uppbeat (free for Creators!):
uppbeat.io/t/n...
License code: WVZ5P9QGAHKOYMA
Excellent 2160p quality. Congratulations for this very useful video 👍
Thanks. I used my iPhone 14 Pro. Strapped to a tripod. Filming down low on the floor on my knees, and leaning awkwardly forward. I constantly wanted to adjust myself. Also wanting to look closer not to make any mistakes. I kept pulling the earphones closer to myself and getting off the camera.
@@DAN1Kpro You did a great job. A high quality video is priceless for such a tutorial. Keep up the great work 👍
Both earbuds are charging but one is full disconnected and not detected when pairing. Not even displaying battery life
same
If you’re not getting anything in one earbud after replacing batteries then some connection came loose or apart. If all else is good try factory resetting them. Resetting: put both earbuds into the case and press and hold both earbuds until led indicates. Take them out and put both in your ears. Then press and hold them till you hear the pairing mode. I recommend first prior to pairing to remove or forget device in your Bluetooth settings.
So uh... how are you going to repair it again???
por que las baterias no vienen cerradas . me llegaron sueltas.como si fuesen usadas.
first time i did it in 30min doing as above. second time it took about 5min. i skipped heating (just knife) and detaching this tiny tape.
Replacing batteries with a new one will resolve the draining issue? As some users have complained the issue still persist may be a motherboard causing draining issue
I replaced my earphone batteries only. Not the case, and they don’t drain instantly anymore. Also I’m on the latest firmware.
@@DAN1Kpro thanks
does changing the battery solves the problem with the product ??
Yes, the problem was the original batteries. Lesson learned: always buy extended warranty/ insurance.
@@DAN1Kpro I read that Sony replaces this product out of warranty but the problem persists. They keep the same battery that originates the problem .
The warranty is only 1 year which mine were past a little over. That’s why I would recommend. Replace the battery and sell the earbuds and get the new ones with extended warranty that stores offer. Choose a store that has hassle free warranty exchange. Some stores might sell extended warranty but will waste your time and try to troubleshoot the product. As if it’s fixable with a reset when it’s not.
Does the battery hold up for a long time after it is replace or does it resume the battery drain after a while?
Yes, the headphones work for a long time again with new batteries. I don’t know how much you used your headphones if the case also dies fast then you’ll need to also replace the case battery.
Hello is it possible to replace the vattery without unplugging anything?
No, 1 cable goes one direction and the other another direction. You would risk ripping a cable or both.
You should have used different glue that one is too strong you won't be able to open it again with the heat gun.
The B-7000 would be the ideal glue to use. Plus it was only an online product, but I had the batteries and wanted to get this done right away. Overtime from heat and just time. Everything deteriorates. I’ve had “loctite professional” superglue come apart overtime from a cracked plastic handle that was consistently pulled on . Planning on selling them. I bought AirPods Pro with AppleCare+ from this battery experience. I used the Sonys a few times a day. Wasn’t really a heavy user. Then 1 day out of the blue(a little over 1 year) the earphones stopped holding a charge. Before they lasted for many hours as usual. Then the next day when I pulled them out fully charged. Both died in a ridiculous 17-20+ minutes. At first I thought maybe the case wasn’t charge, but I would always put them on my anker wireless charger. The case was always green(fully charged). After making sure they were fully charged by the Sony app. I tested them and I never do full volume. The batteries % was dropping quickly from 100% before my eyes. Now the batteries are like new.
Also it will save you from the embarrassment of having earphones fall apart in a public location. I would also recommend to do an all around seal instead of some people showing spots. That way it’s better at keeping water and sweat out.
Agreed. Never superglue electronics. If you face issues down the line, "superglue come apart overtime" is not what you should gamble on.
Another point is to never use metal when taking these apart. If you're unlucky enough you can shortcircuit and fry the entire bud.
If anyone sees this video and reads this comment before buying, be patient and get yourself a common adhesive such as B7000 or E8000 (available cheap and fast online).
Yo no puede componerlos lo desarme y ya no carga ni aparece el audifono
Do not use superglue on electronic seams unless you were raised by a pack of wild animals…
Putting that ribbon back on is hard ar
Yeah, and on top of being tiny it has to be aligned exactly. Take your time not to damage it from using too much force. If it’s not going in pull it out and try again.
i've changed it and it is charging right now. but it's not turning on. could you find a solution to that?
Do you mean not connecting or pairing when taken out of the case? If that’s the case. To reactivate pairing you have to put both earphones into your ears. Then at the same time tap and hold on the earbuds till you hear a feedback “Bluetooth pairing.” I’ve had to do that with mine then the Sony app shows there’s a firmware update which took a while.
@@DAN1Kpro yes i am doing all of these but no pairing sound is coming and not entering pairing mods
If the device is still saved in your Bluetooth you have to press forget or remove first.
Factory reset them. You put them in the case. Open the case, tap and hold both earbuds until you see the case blink red then let go. Then attempt the Bluetooth pairing mode.
@@DAN1Kpro yes i tried all but none of these work
Bro, i have the same problem, but with sony linkbuds S, can you do any video with it?
thewalkmanblog.blogspot.com/2022/06/sony-linkbuds-s-teardown-by-52audio.html?m=1
Replacement battery bundle with glue.
Just found this amazing item on AliExpress. Check it out! $11.99 | 100％ new ZeniPower 1240 Z52H 3.85V Battery for Sony LinkBuds S WFLS900N/B Truly Wireless Earbud Headphones
a.aliexpress.com/_mNSThTc
I would not recommend using a razor on such a small object which almost guarantees accidentally cutting yourself deep. Just use heat. You can also browse around on AliExpress if you want just the batteries and no razor.
thx for your guide 👍..can i ask how to change battery on anker soundcore liberty 4?
I don’t have those earphones but I would think disassembling would be similar accept I don’t know if the company has the battery spot welded or just sitting like the Sonys. If you google teardown, there are photos of model 3 teardown but the batteries look like they have 2 spot welds with a small circuit board.
@@DAN1Kpro thx bro 😁
Hi, how are the things after the batteries were replaced?
Everything works fine. I tried them once but I use my AirPods Pro 2. I might sell the Sonys. They also released the 5th gen.
Man, I broke the flex! Do you know if I can buy it?
I would try searching for parts on AliExpress if not there then online.
Man, excuse me. One of my earbuds is no longer charging. Do you think changing the battery is enough?
Did you mean to ask changing the battery? I would change both batteries. If 1 went the other one will go bad soon as well. Once batteries go bad there’s nothing you can do but replace them. I bet once you place it into the charger it says 100% real quick but as soon as you take it out it drops to 0%.
@@DAN1Kpro Exactly the last thing you said happens to me, however, my specific question was about the fact that in the smartphone application it can't recognize one of the headphones and that worries me a little to know if just changing the battery will be enough
@@CarlosDiaz-zy7mv maybe you need to redo pairing mode again?
@@DAN1Kpro I've already tried. I'll change the battery to see if that works.
@@CarlosDiaz-zy7mvdid you find a solution. Exactly happened to me
what if I don't have a heat gun, is a hair dryer okay?
i saw that method before so it would be okay
Yes, thanks @burackbb for answering. I’m sure if you had nothing and had the black color ones. You could of even let them sit out in the sun on a hot summer day and they would come apart. Or inside a black car by the windshield on a hot day. Just don’t forget to remove the foam ear tips or they will shrink and harden from heat.
No pude ya no reconoce nada el audifono que cambie la batería