I'm not a speed freak but I love watching you guys doing your stuff, at the same time I'm learning so much from you. Knowledge is power, and the faster you will be able to go ❤️
Another amazing episode Raz!!! I don’t mind long videos from you because the content is so amazing! Short videos seem like a rush job. Thanks again for sharing your knowledge brother!!!
@@TheSkinon I disagree...if it takes an hour to show or teaching something then so be it. But if it can be done in 2 minutes then that’s great also. 1 hour long video or 4 15 minute videos...same difference to me. Just keep putting out the best content on RUclips and length does not matter to me.
That is so funny, when you were removing the wires and it was being a little troublesome you said "come on be a friend". I do that. I say "come on be my friend" when I'm struggling with getting something to work. Never heard anyone else say that.
You are the Bob Ross of RC building for sure. You work is so neat and tidy . Loving the tutorials , learning a lot . I am mostly a basher but I want to do a speed run car for sure . Thanks again.
Love your builds and appreciate sharing all your knowledge with the community! You are legend Raz. Keep up the good work and products 😘 from the Basherqueen
Good job. 👍🏼 I love watching your builds and your dad jokes 🤣 Keep it going and I don't care how long it is. I always save to my watch later and or download load the videos I'm interested in so I can watch them when I have time.
I just bought a limitless roller off a member of the Arrma forum and can’t wait to get it. I’m a total noob to speed running’s I’m thinking starting with a lower power setup I already have. A max6 and 1650 combo on 6s. I hope it will be a decent start. Thank You again for your content…
Thanks so much for the detailed wiring explanation. Super helpful especially with perfect pass , tacking away the unused and excess lengths. I just hope by the end I can get a half as good a build as yours. 👍🏼
I would never drop that much money on a esc and radio that couldn't do two way telemetry that aux Cable is where it's at,and s.bus2 paired with the xlx2 means live motor Temps , esc Temps and that means no more taking the body off unnecessarily even the gps is visible on your phone. If we didn't have all the awesome technology to use I'd lose a huge percentage of my fun. And so your videos are good I prefer the longer more technical videos personally but I watch most of em anyway. Keep up the good! And get those shafts ready .
Nice video. I am fairly new to rc. I am watching your videos to build my limitless. Quick question. Did your 1717 1650 motor come with 8mm male connectors? Mine came with 6.5mm connectors instead. What should I do to make the connection?
I love your builds, but I have to purchase Chinese clones and build them due to wanting to stay married to my lovely wife of 35 years! I love to take the WL Toys stuff and make them go 70 to 80 mph. I do love the hobby. I own 40-50 quads, 20 or so rc cars and trucks 5 helis, 4 boats and 6 planes, plus 8 rc tanks, 5 3d printers two laser engravers and I am still married! Thank you China and my wife who understands men will always be big kids! I love to build the sub 250 micro quads using a jewelers loop and magnifier wearing glasses LOL!
What was the reasoning for changing the connectors in the last video? I love your content I'm new to the hobby and I love learning new things about it! Your videos are always informative and indepth
Loving this build Raz! Is it not near time you sent that dual motor build down that runway? I know it kept breaking the ends of the dog bones, but it would be interesting to see how it can do on a runway, were you can bring it in slow over a longer distance 💨💨💨
Dude love your videos. It's not the length of tour video's it's the five times you tell us the same thing. most of the people that watch your videos no the drill. keep the info flowing.
What is a "sexie" look is when three motors are used on a electric super charger for a full size application. Place the motors so they balance the tork wide gears and case for lube. gets 10 psi on stock applications for a0 to 60 percent hp gain bolt on.
Doesn’t the esc to receiver harness have the potential to get caught in the spur gear from vibration? Looks very close but kinda hard to see. Maybe a thin little Velcro strip to secure it to esc or chassis would give some piece of mind?
Did you change the bullets from 6.5mm to 8mm on the motor? Just bought this setup but the XLX2 has 8mm female bullets and the 1717 motor has 6.5mm male bullets
Thanks for everything you do for the hobby Raz, you are appreciated. What type of receiver are you running? I badly need more range! I’m currently using a Futaba 7PXR
What are your thoughts on using the Rovan 1/5 wings on a wider body setup? I have the Delta Plastics Ford prototype style body. Does a heavier wing harm the performance at higher speeds? Thank you Sir :-)
I’ve been watching these videos since episode 1 because I just picked up a limitless V2. I’ve got a hobbywing max 5 esc and was thinking about running the 1721 2400kv castle motor but I keep hearing you say the 1717. Which one would you recommend over the other? 1721 or 1717?
Raz don’t lesin to people who say hurry ? Lol so please take ur time sir ur doing us a big big favor showing us what to do snd how ? Most importantly Wheh no one else will because there haters and ur not so if the guy that is at work and he can’t watch ur whole video to do things rite then he don’t have to watch it because u may by pass something important or foeget something because at the end of the day where all humans and again thank u so much for helping us all be better at our hobby / way of life 😊
Hello Looks good . My compliments.👍 may i ask you for some advice? (Instead of ) I also have a Limitless and now I am concerned that this car really eats dogbone.s pin’s i think that is not normal how quickly these wear out. thanks in advance for your answer. Regards Hollandia 🙏
I don't have Instagram . Twitter and Facebook . Are you on either of those . I hardly ever get on either of them . I would like to get some of the carbon fiber kit for infraction . Especially drive shafts . Don't know where to buy them . Can you let me know please .
Oh . I should have looked . I didn't think . I really appreciate it . I want to get the carbon fiber kit . I don't know what body I'm going to get yet . I like the Corvette body and there's another but not sure what it is . Looks more like a racecar body of some kind . I watch your videos and tell everyone to subscribe . Most of my friends fly planes . I'm into a little bit of everything . Fly every Saturday and cars rest of time . Still have my 1st rc from 1984 or 85 . LoL
Awesome series brother! Im hoping to get the perfect pass and carbon fiber kit for my infraction very soon. Glad you chose the 1717 1650kv motor cus thats what I have with a monster X 8S. Where can I get a set of those driveshafts? Looking forward to part 4 and the test runs!
I am referring to the AWD truck when you broke it on first and second jumps the first jump landed hard . Can't remember if the front hit in first and second jumps and then hit hard on back straight down and same as front. In What I CAN SEE IS ON THE FIRST JUMP AS YOU HIT THE JUMP THE BOTTOM OF THE TRUCK BOTTOMED OUT AND BROKE A AXEL I BELIEVE AND THE SECOND JUMP FRONT OF TRUCK BOTTOMED OUT IT HIT JUMP THEN BACK WHEELS HIT BOTTOM OUT BUT THE BACK IS BOUNCING UP AND DOWN TO EASY TRY BETTER SHOCKERS EVEN 4 -2 SHOCKS EACH WHEEL
just go with what's available here in the UK the max6 combo by hobbywing has the same rating motor at 1650kv I know people say castle are better but doubt it's night and day difference still be a fast speed runner im sure.
@@mattyosborne2986 definitely worth a try buddy just work with what you have got or whats available to you along as it makes you smile that's all that matters
Don't make sorter videos raz i mean you can if you wish of course but the length of the video is the length of the video for the sake of people moaning they can't watch an entire video on there break at work i say tuff sh*t wait till ya get home to watch it simple as that keep going as you are brother don't change for nobody! people don't like it that's there problem people should like you and watch your content for you being you and you doing it the way you like to do it if subscribers don't like it they can always unsubscribe and go watch another channel with shorter videos rant over 🤪.
![ROSÉ (로제) - number one girl [더 시즌즈-이영지의 레인보우] | KBS 241129 방송](http://i.ytimg.com/vi/A9oByH9Ci24/mqdefault.jpg)
Everything You Need Is Here..
www.perfectpassrc.com/
Now you have to make a triple 1717 car !
I'm not a speed freak but I love watching you guys doing your stuff, at the same time I'm learning so much from you. Knowledge is power, and the faster you will be able to go ❤️
Thank you Raz. Can’t wait for the suspension setup vid.
Another amazing episode Raz!!! I don’t mind long videos from you because the content is so amazing! Short videos seem like a rush job. Thanks again for sharing your knowledge brother!!!
Thank you:)!
Yea I reckon 15 mins is the sweet spot 👍
@@TheSkinon I disagree...if it takes an hour to show or teaching something then so be it. But if it can be done in 2 minutes then that’s great also. 1 hour long video or 4 15 minute videos...same difference to me. Just keep putting out the best content on RUclips and length does not matter to me.
@@RazShifrin hi raz can you do a build with the vendetta pls (AND WHAT NOT) thnx
That is so funny, when you were removing the wires and it was being a little troublesome you said "come on be a friend". I do that. I say "come on be my friend" when I'm struggling with getting something to work. Never heard anyone else say that.
Please skip tripple motor and go straight for quad motors🙈🤣 on for each wheel🙌
Nice video thanks
You are the Bob Ross of RC building for sure. You work is so neat and tidy . Loving the tutorials , learning a lot . I am mostly a basher but I want to do a speed run car for sure . Thanks again.
I always hope for long videos from u. ! Best rc channel. Love it and thank u.
Thank you Mike you've been a long time subscriber!🙏🏻🙏🏻
future build? a triple motor or quad motor car would be awesome and ridiculously powerful
Love your builds and appreciate sharing all your knowledge with the community! You are legend Raz. Keep up the good work and products 😘 from the Basherqueen
Thank you Kimberly!🙏🏻❤️
No braces. Love it!! No need with carbon shafts... Still sold out 🤔
U r a awesome guy 👍👍...a. learned a lot from watching your videos ty👍
I meant to say I lol sorry
Thanks!
With 3 engines it will fly to the moon and back in 1.5 sec🤣🤣🤣….
Amazing work. 💪
you should do a three motor build
Informative video keep dropping the knowledge
Good job. 👍🏼 I love watching your builds and your dad jokes 🤣 Keep it going and I don't care how long it is. I always save to my watch later and or download load the videos I'm interested in so I can watch them when I have time.
Im gonna get an infraction soon so this whole series helps me out so much and it’s even entertaining to watch. Good job!
Thanks Raz for sharing.
Longer video fine with me!!
I just bought a limitless roller off a member of the Arrma forum and can’t wait to get it. I’m a total noob to speed running’s I’m thinking starting with a lower power setup I already have. A max6 and 1650 combo on 6s. I hope it will be a decent start. Thank You again for your content…
Tri motor thumb nail brought me here ;)
Awesome videos… building my first speed run car and these videos are a big help… thank you
Thanks so much for the detailed wiring explanation. Super helpful especially with perfect pass , tacking away the unused and excess lengths. I just hope by the end I can get a half as good a build as yours. 👍🏼
I would never drop that much money on a esc and radio that couldn't do two way telemetry that aux Cable is where it's at,and s.bus2 paired with the xlx2 means live motor Temps , esc Temps and that means no more taking the body off unnecessarily even the gps is visible on your phone. If we didn't have all the awesome technology to use I'd lose a huge percentage of my fun.
And so your videos are good I prefer the longer more technical videos personally but I watch most of em anyway.
Keep up the good!
And get those shafts ready .
Great content hopefully the next video will be about wiring the battery 🤙
Nice video. I am fairly new to rc. I am watching your videos to build my limitless. Quick question. Did your 1717 1650 motor come with 8mm male connectors? Mine came with 6.5mm connectors instead. What should I do to make the connection?
Hey I feel lucky because this is 3rd time I got here so quickly 😅 24sec after you upload the video
Excellent! Thank you
U da man Raz
Excellent as always! You’re the man!
Thanks dude another great one,I'm building my infraction gt build at the minute and loving this series
Omg u killed I love heat shrink I have no life
I love your builds, but I have to purchase Chinese clones and build them due to wanting to stay married to my lovely wife of 35 years! I love to take the WL Toys stuff and make them go 70 to 80 mph. I do love the hobby. I own 40-50 quads, 20 or so rc cars and trucks 5 helis, 4 boats and 6 planes, plus 8 rc tanks, 5 3d printers two laser engravers and I am still married! Thank you China and my wife who understands men will always be big kids! I love to build the sub 250 micro quads using a jewelers loop and magnifier wearing glasses LOL!
This has been a really good series Raz.
Hi Raz what size is the motor and Kv you used
Nice ,move on 👍
You should teach me to do that some time show me the ropes keep it up
Nice. P.s.
If you take 30min then I will gladly watch 30min!!,
God bless Raz
I need an 1100kv 2028 motor build so I can get ideas, ha. Don't need multi-motors just one big one. :P
What kind of servo are you using?
Wohooo!
What was the reasoning for changing the connectors in the last video? I love your content I'm new to the hobby and I love learning new things about it! Your videos are always informative and indepth
Awesome raz I’m having no luck with my runs bud crashed today again getting fed up bro lol
Loving this build Raz!
Is it not near time you sent that dual motor build down that runway? I know it kept breaking the ends of the dog bones, but it would be interesting to see how it can do on a runway, were you can bring it in slow over a longer distance 💨💨💨
Nice bro
nice
I'm enjoying this build 👍I dare you to try and build a triple motor on your next build 😎😂
Dude love your videos. It's not the length of tour video's it's the five times you tell us the same thing. most of the people that watch your videos no the drill. keep the info flowing.
What is a "sexie" look is when three motors are used on a electric super charger for a full size application. Place the motors so they balance the tork wide gears and case for lube.
gets 10 psi on stock applications for a0 to 60 percent hp gain bolt on.
Doesn’t the esc to receiver harness have the potential to get caught in the spur gear from vibration? Looks very close but kinda hard to see. Maybe a thin little Velcro strip to secure it to esc or chassis would give some piece of mind?
The heat shrink makes it very stiff it's not moving anywhere:)
Did you change the bullets from 6.5mm to 8mm on the motor? Just bought this setup but the XLX2 has 8mm female bullets and the 1717 motor has 6.5mm male bullets
This is the 1717 1650kv motor right? Did you have to change the motor connectors from 6.5 to 8 to fit in the XLX2?
👍
Longer video is more information, please don't shy away from your style. The busy bee's can make time!
Present!
what servo did you use I figure high torque low speed
what do you suggest
Thanks for everything you do for the hobby Raz, you are appreciated. What type of receiver are you running? I badly need more range! I’m currently using a Futaba 7PXR
Get futaba r2006gs and send it!!
@@RazShifrin thanks Raz, you’re awesome!
What are your thoughts on using the Rovan 1/5 wings on a wider body setup? I have the Delta Plastics Ford prototype style body. Does a heavier wing harm the performance at higher speeds? Thank you Sir :-)
Nice video Razz i follow for Instagram
Raz what is the link to the servo for the steering bro
I’ve been watching these videos since episode 1 because I just picked up a limitless V2. I’ve got a hobbywing max 5 esc and was thinking about running the 1721 2400kv castle motor but I keep hearing you say the 1717. Which one would you recommend over the other? 1721 or 1717?
Raz don’t lesin to people who say hurry ? Lol so please take ur time sir ur doing us a big big favor showing us what to do snd how ? Most importantly Wheh no one else will because there haters and ur not so if the guy that is at work and he can’t watch ur whole video to do things rite then he don’t have to watch it because u may by pass something important or foeget something because at the end of the day where all humans and again thank u so much for helping us all be better at our hobby / way of life 😊
About how much distance do you use when doing a speed run? I know there are variables, but how much on average
Hello
Looks good .
My compliments.👍
may i ask you for some advice? (Instead of )
I also have a Limitless and now I am concerned that this car really eats dogbone.s pin’s i think that is not normal how quickly these wear out.
thanks in advance for your answer.
Regards Hollandia 🙏
I don't have Instagram . Twitter and Facebook . Are you on either of those . I hardly ever get on either of them . I would like to get some of the carbon fiber kit for infraction . Especially drive shafts . Don't know where to buy them . Can you let me know please .
Everything is in the description:)
Oh . I should have looked . I didn't think . I really appreciate it . I want to get the carbon fiber kit . I don't know what body I'm going to get yet . I like the Corvette body and there's another but not sure what it is . Looks more like a racecar body of some kind . I watch your videos and tell everyone to subscribe . Most of my friends fly planes . I'm into a little bit of everything . Fly every Saturday and cars rest of time . Still have my 1st rc from 1984 or 85 . LoL
Awesome series brother! Im hoping to get the perfect pass and carbon fiber kit for my infraction very soon. Glad you chose the 1717 1650kv motor cus thats what I have with a monster X 8S. Where can I get a set of those driveshafts?
Looking forward to part 4 and the test runs!
Diggin it :)
From A to Z should be from R to a to z.
I'm dangerously close to buying a $250 esc
I am referring to the AWD truck when you broke it on first and second jumps the first jump landed hard . Can't remember if the front hit in first and second jumps and then hit hard on back straight down and same as front. In What I CAN SEE IS ON THE FIRST JUMP AS YOU HIT THE JUMP THE BOTTOM OF THE TRUCK BOTTOMED OUT AND BROKE A AXEL I BELIEVE AND THE SECOND JUMP FRONT OF TRUCK BOTTOMED OUT IT HIT JUMP THEN BACK WHEELS HIT BOTTOM OUT BUT THE BACK IS BOUNCING UP AND DOWN TO EASY TRY BETTER SHOCKERS EVEN 4 -2 SHOCKS EACH WHEEL
I need your carbon fiber kit!
Following and building this. Castle 1717 1650kv isn't available in the UK 😭
You could still import it but that’s gonna raise the price
@@crazyrc4610 yea, just had a look it's pre order. I may have to just wait
just go with what's available here in the UK the max6 combo by hobbywing has the same rating motor at 1650kv I know people say castle are better but doubt it's night and day difference still be a fast speed runner im sure.
@@gazza90rc60 I have a max6 1650 in my Kraton exb, cound pull it out for a try tbf 👍
@@mattyosborne2986 definitely worth a try buddy just work with what you have got or whats available to you along as it makes you smile that's all that matters
say white to the right!
💪🏽🇬🇧👍🏽
R u the copwatch guy
Hey raz
Anyone that says videos are too long, play the videos on 1.25x speed
Don't make sorter videos raz i mean you can if you wish of course but the length of the video is the length of the video for the sake of people moaning they can't watch an entire video on there break at work i say tuff sh*t wait till ya get home to watch it simple as that keep going as you are brother don't change for nobody! people don't like it that's there problem people should like you and watch your content for you being you and you doing it the way you like to do it if subscribers don't like it they can always unsubscribe and go watch another channel with shorter videos rant over 🤪.
Bro what's the rest of that joke u was telling I was into u u never finished it lol
LMAO so you didn't get it!:)
@@RazShifrin Oh wait u told it all I'll go back and listen again lmao 🤣