Lenovo Legion Go SSD upgrade guide! up to 2tb! all steps covered!
HTML-код
- Опубликовано: 27 июл 2024
- Full guide on upgrading your SSD to up to 2TB as well as how to use a 2230 sized SSD on the legion Go. In this guide I will show you how to clone your ssd, so no what stage you are at with your legion Go, you won't have to restart from nothing.
*Tool kit:*
Ifixit pro
a.co/d/5MhAlEM
*SSD adapter*
a.co/d/3SgCHMM
*SSD enclosure:*
www.amazon.com/UGREEN-Enclosu...
*A few dock/hub options:*
9-in-1 usb c hub
www.amazon.com/UGREEN-Docking...
7-in-1 usb c dock
bit.ly/3pEVr3V
Unitek dock
www.amazon.com/gp/product/B0B...
cable creations
www.amazon.ca/dp/B0967WZBGZ/r...
Jsaux dock
jsaux.com/products/docking-st...
00:00 intro
00:12 what you need
00:31 preparing your SSD
01:37 prepare your Legion Go
02:00 Cloning software
03:25 Clone SSD
04:28 open device and swap SSD
06:51 reassembly
07:40 boot up and test
#lenovo #legiongo #handheld #handheldpc #umpc #handheldgaming #gaming #DIYupgrade #upgrade #ssd #ssdclone #repair #fix #repairguide #tutorial 
Игры
**Important**
Not shown in video, but you should transfer the foil cover from the old ssd to the new one.
**Tool kit:**
Ifixit pro
a.co/d/5MhAlEM
**SSD adapter**
a.co/d/3SgCHMM
**SSD enclosure:**
www.amazon.com/UGREEN-Enclosure-Thunderbolt-Compatible-Tool-Free/dp/B09C8DPNZJ?maas=maas_adg_155068245E75FF5D443ADAFFA720EBC0_afap_abs&ref_=aa_maas&tag=maas
**A few dock/hub options:**
9-in-1 usb c hub
www.amazon.com/UGREEN-Docking-Extended-Charging-Ethernet/dp/B0BLNCNCMZ?maas=maas_adg_B4B0D110EBD54877A7ECE97DC2CF39DE_afap_abs&ref_=aa_maas&tag=maas
7-in-1 usb c dock
bit.ly/3pEVr3V
Unitek dock
www.amazon.com/gp/product/B0BGLJ5KBV?maas=maas_adg_D8DF5ED3B987846D227C200686D0D147_afap_abs&ref_=aa_maas&tag=maas
cable creations
www.amazon.ca/dp/B0967WZBGZ/ref=twister_B09HSY84M1?_encoding=UTF8&th=1
Jsaux dock
jsaux.com/products/docking-station-for-steam-deck-hb0702?_pos=1&_sid=2eb9c4393&_ss=r&variant=43310256554204
thanks for the reply, Hi I got my legion go in the UK , Should i have power indicators when the unit is off, i only have power indication when the unit is on , the unit works and plays and charges , but when its off , there are no lights , is this Normal thanks >>>?????
I have already done this and didn't tranfer the foil, is this essential?
@@8ruce007 it should be fine without it. Mine has had no issues. More just a precaution to avoid interference with your wifi from what I understand
I have taken the back off again and fitted it to be honest, better to be safe than sorry, total pain in the a@@e working out where to start peeling from lol but all done. Great video thuogh and thanks for the help@@okestgamer
@@8ruce007 no problem, I’ve heard others had issues with the sleeve as well. Glad it worked out though
I just recv''d my "Legion Go" 1/30/24. Thank You for all the the steps you provided; I am even amazed how I was even able to upgrade it to a 2TB(from a 512GB). I am a senior citizen, it is definitely gone take some time to get used to this. Normally play w/ my PS5. THANKS AGAIN!!!!!!!
Sorry for late reply. It's never to late to jump into handheld gaming. Congrats on the new device and successful upgrade 💪
Thanks dude! I was able to clone and upgrade both SSD's in my Legion Go and ROG Ally. I really apperciate you and your videos.
No problem man, glad my videos were able to help you!
Did this today. Massive help watching this. The foil shield was a right bastard to sort & take off the HDD. Just about managed it. Got a faster 1tb drive all cloned and working. You gained a sub and thanks again
Congrats on the successful upgrade, and thank you for the support
Thank you so much, followed all the steps. Everything Worked perfectly! Did have some trouble when it came to screwing on the 30-60 adapter to the SSD and removing the battery cable during the process but everything else went smoothly. I now have a 2TB SSD and a 1.5 TB MicroSD card inside my legion.
Thank you for another amazing video Okest! This is a big help for me since I’m not too knowledgeable with any cloning. Looking forward for more Go videos
No problem man! I’m looking forward to making them
Thanks for this video. Used an adapter from Amazon for $22 and was able to put a 4th 2280 drive in. Macrium was clutch!
No problem man, glad it worked out for you. The adapter definitely is nice to use some smaller SSDs.
Awesome guide, I have now upgraded from 512Gb to 2TB with an additional 1TB micro SD
Thank you very much for the guide :)
Hey no problem man, glad it was helpful for you, and congrats on the successful upgrade
what 2242 ssd did you use and how much?
Thank you so much OKestGamer for the detailed process, good thing that no need to remove the stock SSD for you to do the cloning, this will be my guide once i received mine, by the way new subs here..
Hey thanks for your support! I’m glad the video was helpful for you and hope it goes smoothly for you as well.
Thank you! I had no idea you could use an adapter for a 2230! I will consider this for when I eventually upgrade my Legion Go!
No problem man! Glad this was helpful. Also transfer the foil from the legion ssd when you do so. I missed including in the video
your ally video i used for my ally, so im glad you have one for the Legion Go!
I’m glad to hear it, it’s the main purpose behind the channel so it’s always nice to hear this.
Thank you for this tutorial it made the process simple!
Thanks bro. Creative way to use M.2 2230 + adapter.. 💪🏼
No problem man! Yeah I wanted to make use of the 2230 which was a little better spec than some I had seen of the 2242 size ones
Great video thanks.
I fitted cloned and fitted a 2tb (double sided) 2242 SSD. Didn't need a dock though as I laid the Legion Go flat and powered through the bottom USB.
That’s good to hear, I mention to be safe, as I’ve had it fail on other devices without a powered dock. But that’s good to know for the legion
I was wondering why he used a usb dock when you can do as what you said and use the bottom usb c to charge. Unless I’m missing something
@@Jwheels613 just my old experience with another device kicking in. I can’t even remember which one it was that was giving me trouble now.
Good video, easy to follow and installation was a breeze. NOTE: If you didn't get the NVME 2230 Adapter you can carve your guitar pick into one using scissors. This worked perfectly for me.
Hey glad to hear it went well and this was helpful!
just upgraded mine with 1tb drive. thanks for the tutorial. the foil quite hard to peel, mine got some tearing apart lol. but my set, the battery connector was hard to pull out, so I let it stay plugged in during swap. So when I turn on the console, the booting is instant.
Glad it worked out for you! Sometimes when the battery is left in, it can short something during the swap (has happened on some other devices to folks I talked with).
I love that the manufacters of this handhelds ( also on steam deck ) make that easy to change the ssd´s on the devices and not to hide them deep under other components. I thought i could stay happy with my steam deck until version #2 arrives but i´m honest this Legion Go makes my finger which always clicks "order button" quite nervous. 🤣
It’s pretty nice, and I get that about device fomo haha. I get it far too well
I agree. I got mine yesterday and I'm loving it so far. I'm installing a 2tb now just waiting for the cloning to finish up. I still love my Steam Deck but being 50 my eyes are getting bad and that 8.8 inch screen looks nice 🎉
Yeah I can imagine it would help make it easier to read.
This type of info is great for new owners.
Content game is strong 💪🏽. 😁
Thanks man! Glad you enjoyed it. I’m working on a Day 1 setup and optimize guide right now. I hope to have it live soon
thanks alot for the video i finally got the stupid adapter that almost took 2 weeks to get.
Not a problem, yeah the adapters can take awhile to ship
Thank you for this, great tutorial and detailed as well. I had a extra 2 tb 2230 laying around so that’s perfect you can use a adapter for it! 🎉🎉
That’s great! Yeah I wanted versatility to use on another device in the future if I chose to. Pretty simple with the $7 adapter
How does one even have an "extra" 2 tb just laying around?!?! 💀💀
Huge thank you !!! ❤
Not a problem, hope it’s helpful
your content is great, thank you. I just subbed
Thanks man! Appreciate the support and kind words
Really well done video
Thanks man, glad you enjoyed it!
FYI, there is a built-in tool within windows to make an image from an existing computer, then apply that image to another computer.
It is a subset of commands within DISM, but its not for everyone because it is command line.
but basically you boot from a Windows 2 Go USB drive, capture the original SSD making sure you will have access to the captured image after pulling the old SSD out(weather your windows 2 go disk is big enough for the image, or if you have an M.2 to USB adapter) Use RUFUS on another computer to create a bootable install disk from the captured image, and then boot from this disk after getting the new SSD installed.
I personally like to start fresh from a new drive, and i usually wipe the OEM drive before i start using a new computer, i dont trust that its clean.
That sounds like another great option. I mainly target newer users with the guides, so I pick easy to use software. I can definitely appreciate starting with a fresh install as well though. I've done that with other devices.
@@okestgamer Since its built into windows, i really hope Microsoft just goes ahead and makes a GUI to migrate from one drive to another, with a checkbox telling it that its the same computer, or a different computer that requires different drivers.
perfect, works first time
Awesome! Glad to hear it worked
Excellent clean video. No bs. I ordered that same little adaptor on your advice… arrived in 2 weeks
.
.
.
Which is probably fine since my legion go still hasn’t shipped
Thank you!
And Really? Where did you buy it from
@@okestgamereBay… 🫠
Wow I didn’t expect they would have one up so soon.
Your video production looks great now, I'm just curious if i just want a clean install does the BIOS have something similar to rog ally that it installs everything on a brand new hard drive
Thanks man! Glad to hear it. It does not have the same recovery option as the rog ally at this time.
Thank you for putting me at ease over using the extender. I was afraid it would cause issues with contact points.
One question though, is there a reason why you didn't move the shielding over from the OEM drive to the new drive/extender?
It was a miss on my part, when you do the change I would suggest carrying it over.
@@okestgamerthat was my plan 😊
Thanks again
Perfect! And no problem
0:48 maybe i did something wrong, but I found the ph-0 size screwdriver was the one that worked
Could be a diff sized screw. I've had some devices need 00 some need 1
@@okestgamer bought the exact thing linked in the description, but either way I got it working, nice guide
also word of advice to anyone else doing this in the future, if you're using a win11 media creation tool (or lenovo recovery media) instead of copying the SSD, make sure to remove your SD card, sat there for 1 hour with nothing happening because it was in the system and confusing things lol.
Good advice, I usually remove anything I can that's not related
thank you for this video. I also have a 2tb SSD from Sabrent for my Rog Ally. Don't I lose performance/speed through the adapter?
Nope, the adapter just bridges the gap between the end of the 2230 and the 2242 screw hole. It’s not on the connection end.
Just upgraded mine.
Nice! Congrats and hopefully it went smoothly
@@okestgamer it did.
This is not a tutorial ,this is THE tutorial. Thanks a lot for your help
Thanks for the kind words, I’m glad your upgrade went well
do you have a RAM upgrade guide? I've been looking on your channel but can't find it. BTW you earned yourself a new sub, great explanation!
Oof never mind. Just found one such video and I am not up to that particular task LOL
Thanks for the support. The ram upgrade is a very difficult and involved mod. It’s not one I have attempted.
Yes it’s a big one haha
What SSD do you recommend i was looking at the corsair 600 mini or western digital black and not sure which is better? Doing the clone pulls everything including the bios updates so its ready to go no additional set up correct?
Can you please give me advice ? I have 2tb ssd in steamdeck with dual boot and want to use it in legion go. Should I format it when conecting via enclosure and than follow your guide ?
You can actually just follow the guide. It will format the drive during the process
hey bro! why do you need USB C dock? Can we plugin usb type c from box ssd m2 to legion go?
Hello, yes you can. Early on near launch, some had issues relating to the USB c power. This was an effort to alleviate that through a powered dock. I've heard of a number of folks having no issues plugging in directly.
Do I need to factory reset my legion go to swap my 2TB ssd that’s installed in my steam deck that I want to put into my Lenovo legion go
Nope, you should be able to clone overtop the 2tb ssd. It will erase everything on the 2tb ssd
Do you need to clone the software across? Is there a way to cloud restore like the ROG Ally?
It doesn’t have the same setup as the ally for the cloud recovery. The clone will make an exact duplicate of your ssd to the new one.
Looking at purchasing a 2TB SSD between an Inland or Sabrent. Which one would you recommend?
I can’t say I have experience with inland, but my Sargent has been good
How crucial is the foil shield on the new ssd? I couldn’t cleanly get the one off the old ssd so I just put the new one in. I’ve been monitoring heat and it seems fine but I wanna get maybe another shield online but the adhesive on the old ssd was crazy sticky!
I didn't put it back on mine and it has been completely fine
I noticed you didnt apply the old nvme sleeve to the new drive. I was under the impression that it protected the drive from wifi interference
You are correct, he should have refitted the shielding.
It's the other way arround... the SSD generate interference with the wifi signal. It should still works, but with more dropped packages (ending with slower speeds and probably higher ping in online games)
Yes I probably should have transferred over. I’ll make a note in a pinned comment.
I bought a similar ssd adapter but noticed that it lifts the ssd a bit and the middle screw touches the board, i have added a piece of tape on that middle screw and used the foil that came with the original ssd to avoid any short. Do you have the same issue with your adapter?
Mine didn’t seem to have any issue, but it does lift the ssd a little.
04:07 So the software makes a backup copy of the drive? If so where is it located at how do you delete the backup after your done?
The backup option wouldn't be a full copy, aside from the actual cloning I am unsure where it stores the 'backup'
HI Great Video , Do I have to worry about the original aluminium foil on the original drive thanks ???
I would transfer it over, I missed including that when I did the swap over.
Ok Great thanks for the reply , I'm in the UK and my legion go is due today @@okestgamer
Nice! Congrats man. I hope you have a blast with it. Once I finish a few videos I’ll be playing with mine as well.
Is it recommended to change the ssd and use an adapter? Is the 2230 a superior series?
It’s more for those who have one from their ally or steam deck. It just gives you more options if you want to use it on another device in the future
If you get a Legion Go from Microcenter they offer an upgrade from from the 512 model (only size in store) , to a 1tb $750 or to a 2tb for $800. So $50 more from the 1tb to a 2tb.
Yup it’s a good option if you’re purchasing from micro center
do you know if the Legion comes with "Windows 11 Home" or "Windows 11 Pro" out of the box? I recently upgraded my SSD without cloning and am not sure which windows to download. Does windows 11 home vs pro even have an effect on gaming? I'm just in fear that installing the wrong windows version would collide/cause some of the legion go drivers not to function properly. Thanks for your time
It has windows 11 home. If you install home it should use the license the device itself has registered
@@okestgamer thanks so much
No problem
hey do you think its necessary to take the foil off the orignal ssd and place it on the ssd.
Some have mentioned it’s best to do so, I personally had not and it seems to be fine.
hy, beside adding storage, does it actually increase performances adding space with a 1tb ssd?
No performance increase
Getting that silver insulation tape of the stock SSD drive is almost impossible to get off in a condition to be able to apply to the new SSD. Is there any other form of insulation tape you can use to put on the new SSD? I tried putting the silver tape from the original SSD on the new one but the unit went bang and no longer works, I presume it shorted out the unit from not being covered correctly?
That’s super bizarre, I actually hadn’t transferred it over to the new one, so I’m not entirely certain which type of tape they used.
Had the same problem, mine would rather ripped apart than let itself peeled..
So I ordered some on ifixit, but they are only for the 2230 ones.
Do I really need to buy the whole $75 ifixit kit just to upgrade the ssd? This seems a little steep. Is there a cheaper option that's only have the required tools for this particular upgrade?
Yeah basically any kit that has those size bits should be fine, and then a guitar pick. The kit is good if you plan more than just this repair.
I get boot fail and goes to the boot menu to change the option but have no active touchscreen. Any reason why?
One thing is it could be the boot order issue. That or maybe during the cloning you may not have copied all partitions. For that menu, you likely will need to use the dpad.
What's the reason for cloning instead of just doing a clean Install? Drivers not available on Lenovos website?
Its a little simpler doing the cloning, you can also do a fresh install, but a lot of people tend to miss a driver or 2
Why is your adapter height wonky? The adapter should be flush with the drive or the alignment will be off.
It’s the way that adapter is designed. The ssd attaches on top
So I have to buy a dock to be able to connect the ssd Enclosure?
No you should be fine to upgrade without. Early on there was some USB power issues that have since been addressed.
My 1TB ended up with a seperate partition.
So I had 2 partitions after using this method.
There should be the same amount of partitions as your previous drive. It's a clone of the original drive
I cloned the original SSD to my 2 TB Sabrent SSD using the program but now my 2 TB SSD is 512 GB. how can I solve the problem?
In the tutorial portion of macrium reflect you want to make sure to click shrink or expand storage. I briefly go over that in the video and you can see the new drive has the main portion expanded
what do i do if my 1tb ssd is only reading as if i still have the 512gb sd card inserted
There is likely a partition that was made. Check the windows disk format software to see if it split your ssd into two parts
Hello. Do I need to clone it even if the legion go is brand new? TIA!
It’s the easiest way to setup a new drive. This way you get all your drivers and software that’s needed
Do you actually need the docking station? Can't you just connect the SSD enclosure directly to the Legion Go?
You should be able to plug in directly, I had heard some users had some issues with external SSDs directly so I included the dock option so the ssd is powered in hopes it would help
What’s the best brand recommendation for the ssd upgrade
Personally the one I used in the video is a great option. It runs cool enough that heat hasn't been an issue. You just need that little extension piece I used.
make sure to put the adapter on correctly. put mine screw side up and it didnt latch on correctly that it kept saying boot drive isnt available lol
Yes that is good to look out for
I will use dynamite to open up my Lenovo Go... Then l can easily get to all the components and all l will need to do os just reassemble it and walla l did my upgrade
That’s one way to do it lol
welp i screwed up i jsut installed a windows media image on the new ssd now I can use the lenovo functions... any way I can fix this? i didnt know you havd to clone the image to the new ssd
You should still be fine to clone. Just throw the old ssd back in and then clone to the new one (it will delete everything on your new ssd and then clone)
Question about cloning with new device. If the unit is brand new straight out the box and I update everything first could I just swap out the old ssd card with new 2TB one will it work with out cloning or is cloning required at all times? I watched a video on RUclips but he had the ROG ALLY and all he had to do was updated everything first software firmware all that stuff then installed his 2TB ssd and just powered everything up all working fine he didn't have to clone the ssd card, could this also work on legion go?
Another question is there a difference between the 2230 or the 2242 cos I've come across a few videos like this one as well using 2230 ssd is the 2230 better or something in performance or is it just cheaper to buy then the 2242 one
At launch a 2230 was cheaper than 2242 (not sure on prices today). You will need to clone to have your files, drivers, or really anything present on the SSD. The other video you would have watched for the ROG Ally is likely a cloud recovery option that is present in the ROG Ally bios (I did a video on that as well). That option is not present on the legion Go, so cloning is your best option.
@okestgamer yeah cool thanks for the info I ended up buying the ssd enclosure and a 2230 2Tb gen4 with also the extender and a heat sink to go with it hopefully it will keep temps down just waiting on parts to arrive now, I also bought that silver foil that goes around the ssd for a 2230 I guess it would save me time pulling off the old one and destroying it out of the 2242 which probably won't sit nice on the 2230 with the extender bracket
I wonder if the device is still under warranty after doing this?
If you keep your old ssd and put it back in when returning it should not be an issue
Hi, has anyone encountered error 9 in the macrium software? It clones everything except the Windows recovery partition.
I’ve never seen that tbh. Do you have any kind of encryption on?
No. Brand new Sabrent 2TB drive which I formatted.@@okestgamer
Honestly that is very strange. I’ll have to look that error up. There is a chance that you may be experiencing the connecting/disconnecting bug some users have reported. It’s something Lenovo is investigating
@okestgamer Great video, new subscriber here. I’m new to this tech I want to upgrade my storage. What is the reason for cloning? Thank you.
Thanks for your support! Cloning is good due to maintaining the drivers and everything as it was originally setup. If you start fresh with windows you need to make sure you get all the drivers from the manufacturer. This just makes it much simpler for the upgrade process. Aside from that, all files are also kept intact
@@okestgamer Thanks for explaining.
How come I need the dock? Can't i just plug the ssd adapter into the legion go?
Should have read the comments. Don't actually need the dock. I have my ssd and USB c adaptor coming in tomorrow!
Early on some folks mentioned issues with the usb disconnecting so I suggested the dock because it can be powered. In the end it seems that solution wouldn’t have addressed the previous issue anyways.
so you went from the 512gb to 1 tb? the software cloned all the folders from the drive that was installed?
Yup it clones everything over and acts as if you never changed it. Very simple
@@okestgamer is 2tb the largest ssd that the legion can use?
It’s the largest 2242 I’ve seen. There could be larger but I never found it.
Everything went fine on the cloning, but legion go is not showing my new ssd in bios so will not boot into os, any ideas? the ssd is a kingspec which I saw used in another vid
That's very odd about the bios. The SSD should have nothing to do with that. It does take a few min to boot up after the swap
@@okestgamer
It's weird because the drive shows in Windows but not the bios, I'm wondering if not all 2242 are compatible
That may be the case. Some others had an issue when the side that plugged in wasn't compatible with the slot
Why do you need a dock when you have two USB 4 ports on the system?
You should be ok to use. Some users had some issues with external storage connecting and disconnecting. I figured maybe having a powered dock could alleviate (helped me with a different device that did that) so included it as a safeguard.
Hi do I download the 64bit or 32bit?
You want 64bit
Is there room for a 2 sided ssd? Looking at the SABRENT 2TB Rocket
I think it would fit, but I usually steer away from double sided in a handheld due to potential heat issues.
Good question because I was looking at the same one.
@@devilstrider289 I ended up having micro center install a 2 tb ssd. A little pricey but no problems so far
The clining software no longer available.
Still shows up when I search it. It should be macrium reflect 8 home trial
what kind of ssd did you use for this? if that is the 2242 why still use SSD adapter?
I am using a 2230 sabrent. The cost was lower and performance was higher than the 2242 I was seeing online. I wanted to show an option for people wanting to reuse their steam deck or other ssd upgrades they were transferring over. Just to show other options.
@@okestgamer how do you check the performance of the ssd? i need a guide if what kind of ssd should i pick for my legion go. should i go for 2240 or modified 2230?
Will this carry across games launchers etc?
Yes it will be as if it was the same ssd
Dobyou think the go is better than the ally?
Hard to say early on, but it seems to have more features for the price. It depends on whether you want a smaller light one or a larger heavier one. Performance is very similar, with a small advantage in favour of the legion Go
Why do I need a dock?
You probably could also do it without and use both usb c ports. One to charge and one for the ssd enclosure.
Can I just plug the ssd enclosure straight to the GO and "skip" the dock?
Yes you can, I had suggested it due to some early issues folks were having with the usb c port power.
@@okestgamer ok cool, thank you.
No problem
I am transferring my m.2 ssd I used in my ally, so it is not empty it has pretty much everything I want for the legion go, do I still need a clone?
You will want to, the drivers are different and other core files for the device. Best to do a clone
Sweet thanks, Should I wipe the ssd that I am going to be putting into the go so that it is empty before I start cloning ?
The cloning process will automatically wipe the ssd in the process
the easiest umpc for changing sdd
It’s pretty simple, I would say the ally is a touch simpler due to the clips being less tight but very easy nonetheless.
Thanks for the video but it looks like they want you to register a new account now just to use use their trial. I sort of didn't want to do this but I guess I don't have any other choice unless I look for another video. 😊
Oh they must have changed it. Before you sign up with an email and they send a code. Never had to pay previously
@@okestgamer yeah no paying right now either. I'm upgrading from my 512GB to 2TB rn but the cloning is taking longer than I expected. It's been like an hour now and it's only 61% done hehe. Well I did load up the 512GB almost to the max so hehe. I noticed in your video you didn't tho. Either way it's better than having to reinstall everything
@@volcalstone yeah some folks have had it take like 12 hours. Mine was fresh so it only took like 2 min to decrypt
@@okestgamer thx. Mine is at 80% now. I did walk away from my Go earlier but I have it set to not power off while plugged in. I thought it would be done by the time I came back but I guess not. It might've slowed down while I was gone. Either way I should be done in another 20 mins or so.
Guess my ally 2TB is going to get moved once my Legion GO arrive then :D
Yup very easy to do with the adapter
Are you still using the same SSD and how is it holding up?
I am yeah, it has been working well for me
@@okestgamer Thanks for the reply, I've just ordered the same one 👍
What if don't clone the SSD ?
It's hard to reinstall the OS ?
You should be able to load windows onto it and then install all the drivers and software
Is the ran upgradable as well?
Technically yes, but also no. It’s soldered to the board, so it would take a person with skills in removing and replacing components, after that they would need to modify the bios.
What if i do it without cloning it?? Do i need another pc to do it??
You will need to install legion space and all of the drivers manually. It’s much easier to clone
@@okestgamer but can I do it in the Lenovo or I need a pc
@@hitscorpion4745 oh sorry I misunderstood, it’s all done on the Lenovo
Couldn't get the ssd to unscrew sadly.
Sorry to hear that, I've heard a few have had that issue
Yeh sadly having to ask different shops for possible solutions to help get my 2tb installed.@@okestgamer
hi , got a message that the boot is missing after doing this , any way to fix this ?
My guess is that when you did you clone you
May not have selected to copy all partitions. I would suggest putting in the old ssd and re-cloning the new ssd.
aight will do @@okestgamer
Best of luck
sadly got the same message@@okestgamer
might found the solution
Is it possible to add more memory?
Not technically impossible, but you would need to desolder and resolder the new one on. After that you would need to tweak the bios to accept the memory.
It's beyond my current knowledge
Speed new SSD?
4750 read, 6000 write
Love this device but the AMD drivers need to get fixed ASAP. So far, Ori and the Blind Forest works but the screen is flipped, Ratchet and Clank / Starfield Crash upon start.
Yeah I hope they post drivers asap. I also want them for benchmarking haha
@@okestgamer Haha, Understood! Lets hope real soon.
Exactly, you can force install the 7840u drivers, but I’m wanting official ones for testing.
@@okestgamer I saw that on reddit but I rather wait but not for too long. haha
Yeah it’s more me particularly for the benchmarking video, otherwise I would have thrown them on right away haha
How is the Legion Go?
I haven’t had much time to actually play it yet, but so far it seems pretty cool
I just played Madden 23 and played nba 2k23 ran pretty smoothly. When you put the game in sleep mode and then then it on again it's takes you back to where you left off.
@@felixplace2 can you check if this works with Forza Horizon 5?
@felixplace2 so if you have to give a piece of advice, should I go for the lenovo go or rog ally?
Now can you do a ram upgrade ? ;) pretty please ;)
That’s beyond my abilities…currently
@@okestgameryou can do it buddy.
We believe in you
I know a guy who probably will attempt it
@@okestgamer and I think I know the guy you know ;)
@@dinosaurd7295 you probably do haha
👍
🤝
You forgot to put the tin foil that protects for any interference
Yeah I forgot to transfer it over. Have not had any issues so far with it off thankfully
Any chance you can test Fortnite on this? See how it runs 🙏
When I get to the testing phase I can see if I can fit it in
Why the fuck is there no small pocket for an SSD and that's all? Because I guess you lose the warranty?
did i really need a dock to do the process? and if it so...is that i need a good quality dock system?..can i use the ordinary dock or hub?
You can probably skip the dock for the process. In the early days of the legion launch there was a USB power bug, it's since been resolved so should be fine