How to connect IP camera without NVR or PC Computer
HTML-код
- Опубликовано: 21 авг 2022
- The typical IP camera system includes IP cameras, a Network Video Recorder, or PC computer. In this video, you will see how we can set up an IP camera without involving a network video recorder. You still can use the PoE injector to supply power over an Ethernet cable. The micro SD card is the cost-effective solution after you remove the network video recorder from the system. It is the simplest standard surveillance system.
If you will need any assistance with your project, please feel free to contact us here: www.fastcabling.com/free-solu...
Find us on social media：
@Fastcabling 
Хобби
![[HOWTO] Find an Unknown Static IP Address !!](/img/1.gif)
Your videos are very practical and well presented. Your connectivity design that eliminates the need for the NVR is just the solution for my needs. Much appreciated.
Glad to know it helps! If you're interested, please subscribe to our channel.
Can you recommend an exterior camera and POE injector combo..that are compatible/works well together. Thanks.
You can have a look at our collections. www.fastcabling.com/product-category/ip-camera/
Great video, thank you.
Thanks for your comment!
nicely explained...I have a question..how can I connect non-PoE NVR with the PoE switch n PoE IP camera?
You can attach all your ip cameras and non-PoE NVR to that PoE switch, it will work. Just make sure you have used the PoE ports for ip cameras.
@@Fastcabling Thank You! Appreciate it
Thank you and great 😊
For Wi-Fi Cameras can I use a Cisco access point plugged into the POE Switch then to the Router? Then to a computer or NCR?
Yes as long as the network setting is right, I mean if you can access the internet through Cisco access point, you can hook the camera to the Cisco AP.
Thank you for your nice informative videos, I have a question, what's the name of the APP which you are using for viewing the IP camera on the phone .
It is the iCSee app, but the app is property app that only works with specific ip camera. Different ip cameras could have different software. You should get the software for your supplier. Usually the mobile app is free.
@@Fastcabling Thank you for your quick answer, you're wonderful
Thanks for very clear and informative video 😊 On 2:51 you show how to connect your phone to the camera that is on the same router like phone. But is it possible to connect to camera and watch the video while you are in a completely different location (in the case of same combination - only using camera and router with no pc or nvr)
Yes, you can access the camera remotely on the app.
Is the poe adaptor necessary I thought the ethernet cable powers the camera ?
The PoE injector is the power source for PoE system. The Wi-Fi router can’t inject the power to Ethernet cable.
Sir I have two shops both are in different location I want to view shop A view in my shop B DVR(Hikvision) I have statics IP Internet connection in Shop A my question is if I connect Hikvision IP camera in Shop A Router and port forward IP camera to Router’s Static Ip then can I connect that IP camera in Shop B Hikvision DVR?? please help me 😢
Hey, likes concept
Need help for CP plus E21 camera ethernet cable running without wifi setup?
If the camera has Ethernet port, you can hook up the cable to router or switch. Technically the camera is a computer. It has IP address, and you can connect it to any network. As long as the ip address, gateway address and DNS setting is correct, it will be online.
Can we plug directly to Wi-Fi router by using power supply through adapter and use WITHOUT POE? Or POE is compulsory?
Yes, since the IP camera shown in the video supports both PoE and DC power. You can directly connect it to the router through the RJ45 Ethernet port and power it using an external DC adapter.
I bought an used ip smart camera, how can I unbundle binding? The model of the camera is Chekoh Hercules B1
It depends on how the camera designed. If it relys on the cloud connection, you will be unable to access the camera without involving the cloud.
wouldn't it be adequate to supply power only and just use wifi to check the sd recorded footage? if I need quality I can put the sd card into a pc
Certainly. But ensure that your Wi-Fi network has sufficient coverage and bandwidth at the camera's location. Wi-Fi can be subject to interference and may not be as reliable as a wired connection, potentially affecting your ability to access the footage.
Thanks for your video, just a question I have around 200 ip cameras how can I connect and backup all images without NVR
I think the most cost effective solution is the NVR especially you have mass IP cameras in the system. You do know you can connect two NVR into network. One working as primary recording, another working as redundant recording. Otherwise you can use the microSD card on board recording.
I purchase xmeyer camera for outdoors. My electrician has set them up outdoors. They came with a NVR wireless is it possible for me to connect the nvr to my router and connect with wifi cameras (4)? do they all have to have the same ip addresses ( I'm thinking yes). How would a vpn cause problems for the camera. If you could respond soon I'm appreciated. What is the name of the device you connect with all your cameras? these camera are installed and connected to an outlet but I would like not to use nvr pc computer. thanks
I suppose what you possess is the wireless NVR bundle. The NVR only work with dedicated ip camera. Each camera has unique ip address, actually it has different subnet. You can’t access the cameras directly through ip address. All the video required must go through the NVR.
@@Fastcabling Thank you so much for answering my questions they are Bundled. I’m thinking I can connect the Nvr to my router and hopefully I can get the outdoor cameras to operate. They did so indoors when I tested one of them to my router create their own ip address.
These are wireless cameras once I connect the NVR to my router I should be able to connect the cameras using my wi-Fi, correct? Again thank you. I’m not a tech Just a girl trying to learn not to pay someone. Thank you again for being patient
since you help before I'm hoping you can help again. my NVR is connected to my router (but it won't connect with my WIFI code. I have install 4 xmeye cameras. Unfortunately, one of the four cameras has not loaded ( initially it was the first to load and suddenly died. When connecting the NVR, all cameras were given a code but camera 3 states unused. meaning? I've checked all installation and nothings seems wrong. Any ideas you may share is appreciated. When on RUclips, I'm no seeing people using their router to connect the NVR. But I do have 3 camera working but the one that isn't, is the most important. Hope I'm clear about my issue. PS someone said to create an ip address for the camera but I have a vpn. Also is a guide for Xmeye Pro?
I think you will need to verify that camera is still working properly. You can power up the camera and listen very closely. The camera suppose to make two small clicks sounds during the boot-up. If you still can hear the click sounds, then the camera boots up successfully. Otherwise the camera is defective. Then you can attach the camera to your router and use XMEye to discover the camera in the same network. The ip camera works standalone. It never needs the NVR to keep it running. The XMEye will discover your ip camera and show it in the list even the ip address is incorrect. You can’t access the camera if the ip subnet is incorrect, but you should see the information of that camera.
Thank you for your response. These are my last statements. I'm aware of the clicks so thank you. All four cameras have been install outdoors in 4 different places. 3/4 cameras loaded and video. The 4th cameras starts loading but can't seem to produce images of its locations. Initially none of the camera load, so I plugged the NVR into my router. Immediately my phone showed 4cameras and I assumed ip addresses. Cameras are showing images except one and this is issue. Since the 4th camera is trying to load, it's active but not videoing an image. These cameras are xmeye. The cameras is label WIFI. Tried to connect cameras using my WIFI, no luck. The 4th camera loads so it is not defective . 2 installations in the attic monitor left side of house(2cameras) two installation right side (courtyard and carport is the issue) in outside room away from the main house where the router is located. If any advise you can share will be appreciate. My electrician installed the cameras. Have a placed day and thanks.
Okay so if don't want to use POE and just go wifi will i need to input a ip address into the phone app ? and which phone app are u using again ?
That won't be necessary. Pairing a camera to an app usually happens by scanning a generated QR code with the camera's lens, or by connecting to it as a wireless network on the phone. In this video, we're using the iCSee app. Some manufacturers offer end-to-end solutions, where their cameras, NVRs/DVRs, VMS software and apps are designed to work seamlessly together. It's essential to research and verify compatibility based on your specific equipment.
I have Hikvision IP camera what app I need to download to view in my iPhone
To view your Hikvision IP camera in your iPhone, you will need to download the "Hik-Connect" app from the App Store. The Hik-connect app is designed to work with Hikvision series DVRs, NVRs and IP cameras which support Cloud P2P function. It allows you to live view your cameras remotely.
HI! how can i configure the VMS that i be able to view the cameras from another network?
If your camera support P2P connection which has the cloud server will assist the VMS software to make the connection. You just need the cloud ID to access the camera from another location. Otherwise, you might go for the old way, you can port forwarding the camera's TCP port on your router, I assume you have a public accessible IP address.
what app are you using? thanks
I'm using iCSee for my setup, but keep in mind that the mobile app can vary depending on your vendor since it's connected to cloud servers. Make sure to grab the app from your specific vendor for compatibility! 👍
what is the Bnc connector from camera hooked to I need what ever that is and the end box is a power supply right poe box is that what I ask for when I go buy these things
It is the DC12V power adapter. You don't need BNC connector. It is the IP based camera, not analog camera.
so your camera doesn't have the bnc connector on the end mine does and dont know what to buy to convert it to go to my pc or tv I just got one camera wanted to hook up
Can we use IP address in different countries. I'm going for a vacation but want to check my home time to time. Thinking about getting an IP cam but not sure if I can use it while I'm outside the country.
The IP camera can be accessed over the internet, allowing you to view the live feed from anywhere in the world, as long as you have an internet connection.
@@FastcablingThanks for the info
You're welcome!
is it possible to use NAS or Server as recorder?
Yes, this setup can provide centralized storage and management of video footage from multiple cameras on the network. However, it is important to ensure that the NAS or server has enough storage capacity and processing power to handle the amount of video being recorded. Additionally, proper network bandwidth and security measures should be in place to ensure reliable and secure transmission of video data.
5:00 How can you make sure your laptop is in the same subnet if you do not know what the IP address of your IP camera is? Don't you have to connect the IP camera to your computer to determine the IP address?
The WiFi camera will automatically obtain IP address (DHCP) from your router. After the mobile app connects to the same router, it can use broadcasting message to discover the IP camera.
@@Fastcabling Thank you for the quick reply. However, It is not a WiFi camera. It is a Reolink POE IP camera. I have it connected to a macbook through a POE switch. There is no router.
@@auditocanarsie7355 What if u use an ip scanner on your laptop ?
After you connect the camera to LAN port in the router, what will happens? will the router connect to the camera and send WiFi signal that can be viewed by PC? and how?
The camera can be connected to the router via wired or wireless connections. Once connected, you can view the camera on smartphones, tablets and PCs.
So basically the IP cam is using the router as a signal booster to the smart ph. right ?
Just make sure the IP camera and your smartphone connected to the same network (router).
@@Fastcabling Thank you for your tip and info.
My pleasure.
How can we upload Camera to cloud storage live directly ..
It depends on providers of your camera. Most of the cloud storage service is subscribed based. You might need to pay for the cloud services. The micro SD card on board storage is cost effective solution without subscription required.
can you tell us how to run any ip camera without NVR and dvr other network pc or leptop not the same network
Some IP cameras come with cloud services, which allow the user to use the camera’s mobile app or web portal to access the camera feed from anywhere. This method is often the simplest and most user-friendly but may require a subscription fee.
what was the app did u use when u use camera to phone
It's the iCSEE app.
We used the iCSee app for that demonstration. It's indeed a proprietary app designed to work with specific IP cameras.
I want to know how to install IP cameras and monitor it with mine mobile phones
Download a mobile app that is compatible with your camera and follow the instructions to connect it to your network. You should now be able to view the camera's live feed and recordings from your mobile phone. Make sure to set up notifications and alerts as needed to stay informed about any activity.
Can we record video on usb external hard drive connect to wifi router.
Some routers come with USB ports and support for USB storage devices, allowing you to share files across the network or use the connected storage for various applications, including as a simple Network Attached Storage (NAS) system.
While technically feasible, this setup might not be as straightforward or reliable as using a dedicated NVR or DVR designed for handling video surveillance data. These devices are optimized for video storage, offering features like easy camera management, motion detection recording, scheduled recording, and more.
@@Fastcabling Thanks for fast reply. so, it's possible but not feasible, Can you make content on it? thanks.
We'll definitely take that into consideration 😊
What is the name of the app
It's iCSee app.
How to connect camera with tv smart by router without internet or cable
If you don't want to run cables, your cameras must be connected to a network via WiFi. Still, you need the Internet. The smart TV must be connected to the same WiFi network created by your router, or connected via Ethernet cable to another LAN port on the router.
What apps in mobile?
It's an iCSee app.
why my ip camera unable to connect to LAN cable
No all the IP cameras have LAN port especially the WiFi camera. In this case, you only can use the WiFi connectivity.
What app name please?
It is iCSee. However the mobile app is vendors specific as the app is related to cloud servers. You might need to get the app from your vendor.
How can I get the name of the camera
What is spp name??? Send me the link
play.google.com/store/apps/details?id=com.nvictech.greenbackyard
hello what appp
You might reach us support@fastcabling.com
Got a smonet sm-w1296p from a Amazon return box store but now research that cam says you need dvr I tried the icsee app but no luck any other options the cam puts out a wifi signal but I don't know password. It has a Lan cable but on router option page only shows mac address
Which app to access ?
In this video, we use the iCSee app. However, some cameras are vendor-specific and come with a dedicated app.