Diffusing LEDs: From good to GREAT
HTML-код
- Опубликовано: 31 май 2024
- If you ever worked on a project with LEDs, I bet you've spent time thinking about how to soften their hard light. Here's my top tips for diffusing LEDs ;)
If you find my vids useful - support me on Patreon!
➡️ / zibartas
And here's your Zibartas Discord invite! If you like DIY/nerdy stuff, you should check it out!
www.zibartas.com/discord
_________________________________
Amazon referral links for the parts I use :)
Analog Single Color Strips:
amzn.to/48VwYZg
DENSE Analog RGB Strips:
amzn.to/47FEw19
DENSE Addressable/Digital 144/m RGB Strips
amzn.to/3vPGpek
Addressable/Digital LED Strips (Neopixels):
amzn.to/425JVNY
Different form factors - from strips to spots, rings, etc.!
EXOTICS:
Chip on Board LEDs (f.x. I use 50cm long ones for my wings):
amzn.to/4b4mCYM
_______________________________
Find more goodies on my social media accounts:
x.com/zibartas
/ zibartas_cosplay
/ zibartas
Also, I have a website:
www.Zibartas.com
Timestamps for comparison of materials:
0:31 Baking Paper
0:46 Sanded Plexi Glass, 400 Grit, Single Side
0:50 Sanded Plexi Glass, 400 Grit, Both Sides
0:53 Sanded Plexi Glass, 280 Grit, Both Sides
1:01 Opaque store-bought Plexi Glass
1:27 Stock and Sanded "CosplayFlex Clear"
1:52 "CosplayFlex Shining Foam" 5mm, 10mm, and a bluish Kitchen sponge
2:08 Synthetic Woven Fabric - 1 Layer
2:12 Synthetic Woven Fabric - 2 Layers
2:14 Synthetic Woven Fabric - 4 Layers
2:17 Hot Glue
2:53 Opaque Edge-Lit Plexi with Reflector
Zibartas what material did you use for the reflector? I would love a follow up video on reflector materials with edge lighting
@@wingsdesire1 it's just plain foamcore! Sorry I didn't respond earlier! :D But yeah its a good idea, actually.
Hey man, any chance you could orient me to a synthetic woven fabric dealer? Cheers
@@alexandrelavassani9392 hey pal, i use something like this for homemade stuff amzn.to/2JcPZ2B but if you go to a local fabric shop you might get a cheaper/better deal!
Zibartas excellent cheers
The baking paper tip is underrated. Everyone has baking paper at home, and it works really well to diffuse
how do u put it on your ceiling tho?
@@Alex-gq4yd tape it bro, i would suppose lmao
@@Alex-gq4yd staples is good too
Bold claim that everyone has it.... also true tho...😂😂
@@thebainetrain if you dont have it yet, grab it the next time you get groceries...
Diffusing the light properly is the #1 thing that makes or breaks an LED project I think. Great tips
It's best to redirect them off a surface before the light reaches your eyes.
I used a white/clear “frosted” shower curtain once and it worked super well for diffusing leds! 🙌🏻
So for someone who has never seen your videos before to suddenly see 1:18 was a bit a shift lol. Thanks for making!
ikr
Excellent video man. I have never thought about the baking paper and sponge. Incredibly cheap and easy to find and life savior.
Thanks a lot.
i do love your explanation about a different way of using the led and connecting it
Great Channel, super clear explanation, and steps. It's great you explain techniques in general. Really helping the makers out here. Thanks!
you can go to a PC(or TV) repair service and ask them for broken LED/LCD backlight boards and foils.. (from monitors, TVs and laptop screens)they usually(in 95%) trow them away if the screen cant be fixed and probably will just give them for free.
the foils in the screen are perfect for defusing and amplifying the light(that is their purpose)
for smaller projects, the foils from a broken phones work equally well, and most mobile service shops also trow them away...
Except if you live in Brazil xD. People here love to sell, even if doesn't needed anymore. EVEN if doesn't function anymore.
Thank you bro there is a electronic repair shop infront of my house I will go there tmrw and ask them for the foils
@@s1l3nt40 how does it go
@@user-lk9ii5nu4j I asked them and they gave me a lot of foils
Great video :) LED strips are so painful to look at, but once diffused man they sure do provide some excellent ambiance!
Well planned and explained video, I really liked how you showed so many examples!
Yesss more videos on LEDs. Thank you!
Thank you so much! Im planning on getting some strips and put em in my room incovered, but i dont want to look like a "basic" (im just getting the strips since i feel like they would look nice to me, not my phone) and this realy helps.
Great video! Just the info I needed and your builds look awesome quality!
I'm looking at ways to spruce up the RV with LEDS so this is very informative. New subscriber.
Thanks for sharing all of this, I'm learning a lot.
You can also use gels to add coloring along with keeping uniform brightness. This is especially useful for lighting astronomy canvas paintings from behind that have different colored stars (like Orion, which has a red super giant, a blue super giant, and a multi-colored nebula. Clear gels sanded down can be glued together to reduce the brightness of stars respectively. Great channel. Thanks.
Would it be possible in theory to "change" the color of the LEDs using these methods? Like if there's a single orange LED and we want to say... alter it to appear red or some other color? Thanks!
For a 16x16 led matrix I filled a 3d printed grid with epoxy mixed with some drops of white acryllic, on top of it I put glass with a thin layer of black paint on the inside, which made the screen black with clear square pixels when lit. I read that glass bubbles would be better as a diffuser instead of paint because it scatters light without blocking. The paint worked great though
Thank you for all the ideas and options. You certainly saved me a lot of time!
Wow, that editing quality pops!
Thanks for the great ideas and applications
So I came to this video out of curiosity, and the clip at 1:15 completely blew my mind lol. You're very talented!
Hello, and thank you for all the work you put into this :)
For edge-lit applications you might want to use a so-called 'light guide plate' (LGP) instead of plain plexiglass. The are especially built to direct light to a larger area.
I'm watching this video to help diffuse light for a portal gun lol.
So glad I found your video 👍👍 I've installed a blacklight strip behind a painting done with uv reactive paint features and the light wasn't stretching properly/overly highlighting the edge. I am trying your tips as soon as I get home in the morning!
Great detailed tutorial. subbed !
omg i never even think to use baking paper to diffuse light! YOU GENIUS!
This was very helpful. Thank you
I'm having decent results with FDM printed covers, if having gone through a couple dozen design iterations. Clear PLA, 50% gyroid infill and a domed cover works quite well. Especially that you need insets for the components on tape in order to slide it into the grove of 2020 extrusion. Otherwise cutting a strip of frosted acrylic would be far less work. I intend to share my designs once I get the 'code' (FreeCAD part design workbench) and documentation cleaned up.
Super useful, thank you!
Although I'm light years away from doing what you do, I'm already liking your ideas
Very good ideas, helped me a lot on my project. Thanks XD
I used this heavy weight vellum from Blicks Art Supply called Canson Opalux Drawing paper for a 3D project. It is a vellum paper with the stiffness of acetate and comes in 19x25 inch sheets. It was decent at diffusion with 1 layer.
Clear spray paint sprayed from further away than usual on glass perspex offers efficient diffusion.
Different distances layers and base material can change the effect.
Good stuff. Never would have considered most of these.
Baking paper actually works awesome for the dense 0603 strip I used. Thanks
My favorite method is similar to baking paper (I agree with the texture problems) it is called tracing paper, if I'm correct. Much more consistent, no texture.
The other is similar: everybody knows of laminating paper by putting it into a certain film then heating it up. That film is translucent (waxy, maybe?) before use, makes a great diffuser.
Awesome video, thanks!!
Thanks for all the great ideas. I think I'm going cut my bed sheets into strips and hot glue them to my led's. I'm going for that classy look.
lmao, too funny mate! Love your informative vids, I'm just beginning to learn about led, powers source, voltages etc and your vids have been helpful, thanks
Just an awesome video! It opened my mind to so many creative ideas and concepts. Thanks!😃😊
This is exactly what i was looking for! Thanks
Glad I could help!! I'm thinking of making a 2nd, follow up video too, though :)
@@Zibartas looking forward to it! I've got transparent filament on it's way. I just hope it will diffuse the light like I hope
You know how led strips sometimes come with a protective silicone covering? Is there any way of having that diffused? Any particular spray paint maybe?
This is great advice!
This video is a godsent, thank you. i subscribed
I've used an interesting mix to waterproof some inexpensive white LED strips to put outside. Same idea might work with a bit of experimentation.
You have to have a channel for it to go in. Mix 100% silicone caulking with enough naphtha to make it pourable and it will flow. Pour it into the channel slowly to reduce bubbles and let it sit for a day or two. You need good ventilation, but it will cure as the naphtha evaporates. The final surface will be smooth (the fewer the bubbles the better), it will be waterproof. Some kind of stain/paint/etc. would provide the diffusion.
Using white silicone and maybe a mix of white and clear would ensure the pigment is soluble in the mix for consistency.
Do you have a tip for diffusing fluorescent light guards?
I´m still pondering over what to use and can´t really decide.
The baking paper one may be my final option, or maybe some paper?
BEAUTIFUL thankyou for this resource. I'm a lower budget cosplayer who is trying to make cheap secondhand fairy wire lights work for my costumes, and want to disguise the fact. I'm thinking I'll combine baking paper with holo fabric scraps for an ethereal, textured feel.
great video and tips thanks so much
Love the videos You have an awesome character n makes the video enjoyable!! Great tips too!!!!
amazing video ! very useful 😊
Question, is there something like this that is pliable and tube-like that would work to put around something more pentagonal?
1:17 that is incredible well done.
Cheapest way to diffuse LEDs is using masking tape (a.k.a painters tape) and of course other kinds of tape. You can add as much layers as you want to suit your needs and diffusion level. Cheers for the video, sanding plexiglass is interesting.
So if the LEDs are under my cabinet I just put tape over them like I'm taping them to the under side if the cabinet? I've been debating if I should just get a 6 pack of LED bars that link together or the strip lights.. Can't decide lol.
@@Mandy_39 Hey, the LED Bars that link together are probably way more expensive than the LED Strips. If you can go for the LED strips and diffuse them with tape you'll be good to go with less money spent. To answer your question, yes you cover the LED strips with tape. Usually I prefer to do this process prior of sticking them to a cabinet or table as it will be easier to remove excess masking tape from the strips. I prefer to do this method on waterproof LEDs (the ones with silicon protection over them) as the end result becomes neater and I am also less paranoid that the masking tape heats up. Good luck and enjoy. Any further questions don't hesitate to ask :)
@@olivermgrechthanks, really appreciate the reply! I'm realizing that they are way more expensive & I obviously want it to look good but that's to expensive for my liking especially since I want to do lower & upper cabinets! Is there a specific brand or kind of tape you like best, them heating up is what worries me the most. Do you just use 1 peice or multiple? Guess it depends on the lights I buy lol. Any recommendations on brands of LED strips?
@@Mandy_39 No problem! If I had to recommend a brand it would be certainly govee as their quality is great and they are very well priced. I also had good results with random brands from China that I bought from ebay. About tape, any basic painters masking tape would do, I tend to find a branded one for a few extra cents as the glue will be of better quality. USB powered strips or the ones that come with a 5V or 12V power supply would be safer as they don' t emit a lot of heat. Whatever you opt for always test it out and monitor it.
When you apply the masking tape over the LED strip you might need someone to hold the other end as the strips tend to roll off, or if you're doing it alone (like me) a heavy book to hold it in place would help as well :) You'll understand this when you start the first one :) Cut excess tape with a craft knife so it will be really clean and neat.
i got a huge wall tapestry of space, and there is a full moon in the corner. i want to diffuse a rgb strip and make it so the moon lights up. Thanks for the tips I will be trying it out
what tapestry did you buy? :)
i want to know too
Great help, thanks
YES, it is useful Sir!
Thanks! I am around a lot of sandpapers here so cheap way to do it!
I'm looking to diffuse a small area (half inch square) and will likely only have enough for 2 or 3 led lights, as I am also wanting this small space to alternate between red and blue, I'm sure it introduces other difficulties into the equation. any suggestions?
it's not the best option but i tend to use a 1-2 mm thick layer of Thermoplast when I have no space at all. It difffuses the pixels to 80% mostt of the time, even if i have literally 0 space in between the diffusion and LEDs.
So edge lighting, a reflective material, and frosted plexi got it.
Where do you buy that blue Matt you have on your table. Do they make a clear on to put on a back-lit drafting table.
What kind of things could I use as a reflector?
Enjoyed the vid thanks!
Thank you so much 👍🏼👍🏼👍🏼
hi there. i changed the LED backing light of my TV and now i can see brighter spots where the LEDs are through the screen. the LEDs dont have that difuser plastic as some Samsung TVs has, its only the bare LED. im not sure if i messed up the order of the different difuser and polarized Sheets that goes between the LED and LCD screen. In the end my problem seems similar to what you've shown and a difuser layer right after the LEDs could do the trick. what do you think? any experience with the different filters in LEDs TV? thanks a lot
thanks. Very helpful video. )))
Thanks. A really helpful and funny video.
1:17 whoaaa cool... And im just here trying to soften my studio lights
I have dark denim and trying to figure out a way to let the LED show through it. It would be best if you didn't see the individual lights. Better a lit line. Is there any fabric I could sew into the denim that would let the light out yet still not look completely foreign to the denim? Thanks for any tips.
Only big brain moves over here
Random question.
I bought some led strip lights to swap out in my photo booth and i would like to turn off some of the lights that will go around the doorways. I saw something about " CAM " so what is that stand for and how can.i use it?
I'm making Sumomone's guitar from Show by Rock and it lights up, gonna try this out for sure.
this was dope!
Wax paper, Great! I have hardwood floors and that’d be perfect to diffuse the reflection for my LEDs
Glad I stumbled on this channel. Might try some more creative ideas in future, but for now I'm just trying to diffuse a pir-sensor light strip I have in my apartment hallway - I'll try baking paper first as cheaper is better lol.
Thinking of how I can warm the colour up a bit too, as the light is a little too harsh for me (despite being advertised as 'warm white').
Just discovered that putting a couple of layers of painters/masking tape (which comes in yellow as standard in the UK) directly onto the LED strip does a decent job of warming up the hue of the light just a little bit (plus provides a slight diffusion, as well as reinforcement for the adhesive on the strip) - so I think I'll have a good result once I add the extra diffusion of some parchment paper - all done with cheap supplies.
I am trying to edge light plexyglass for my desk would 144 or cob lighting do better for rgb?
Would you use sand paper fron inside or outside? I would say from inside because the outside stays smooth and reflecting. What would you say?
Thank you for always presenting fantastic tips which inspire so many more ideas. A little off this topic, but I am in need of assistance. I am looking for a Leed(magnetic) switch to use as a trigger to turn on and off a strip of LED lights. I contact companies and they have no clue as to which switch to sell me. Do you have any recommendations for a source with knowledge and not a sales rep commission quota? Thank you in advance, and keep up the fantastic projects.
great vid.. very helpful
I have a question...I've got 112ea x 5mm opal frosted acrylic rectangles (60mm x 50mm) sitting on 8 shelves in a display cabinet with 5mm in between each one horizontally. I want to light each and every one up with white LEDs as diffused as possible while sitting on a 15mm hardwood shelf. Tall order with the LED so close to the acrylic i know, but any genius ideas would be greatly appreciated!
My question is I have a cyberpunk mask the led circle light is rbg lights they are super bright and in video and photos it shows a second circle of lights how do I prevent that without wrecking my mask ?
Hi Zibartas! Great videos thank you !!
Could you please tell me how you made that LED connection at 0:13 on that watch battery please :D ? I find it so cool and can be very useful!
Great video! i will use it for my cosmetic car lights
Do you have any recommendations for materials that are flexible that can slightly dim the LEDs? I have a strip of neon-like LEDs and they're so bright that they're hard to look at haha, and while bright is good, I also don't want to blind people
this was very useful :)
Hey bro what do you think about using frosted scotch tape?
What did you use as a reflector?
Is there any way to change the color of the blue led light for a fixture ?
Thank you so much
do you know what is the material of the alexa echo dot 3 ring, to diffuse the led light?
I have a 50w LED
construction spotlight that I point at the corner of my (white) room to simulate daylight (google Portable LED SMD Vega floodlight 230V 50W 5500K). I would like to diffuse this light such that it does not have to be pointed in the corner but can be used to light a room directly. Do you think this is possible?
I found the video useful so I subscribed
I want to make a tummy glow. Its part of a halloween costume so. How and what should i use of that kind of surface area in terms of material? Im guessing defuse foam?
I have a U led channel holder which I placed a led strip. I am not sure what is the best way to diffuse the lights. Can you give a DIY suggestion?
your the homie for this
thanks
Hi mate, can I have some advise please - I am interested in purchasing the Govee Smart led lights but they only come in 5m and 10m - I have specific requirements for 2 strips of 6.5m each for my child's bedroom - Govee say that this is not recommended to connect 2 together due to power and voltage issues by cutting a 10m strip (of what's not being used) and adding these extra lights to a 5m one which I think is nonsense as I don't see any reason why there should be any issues, but what's your opinion on this please. have you ever had any issues? Also, I see that there is a 12v battery pack available and I need to put one where these where there is no power source - would this be possible? Thanks for your help !
With all the LCD flatscreen TV people get rid of on the daily you can just pop one of those open and take out the stacks of light diffusing sheets. there's one big thick one sometimes two about an eighth of an inch thick, maybe a little thinner and then a stack of like six thinner ones I'd say about a little thicker than a piece of card stock paper you can get quite a bit from one TV.
how about using silicon sealant strip for diffusing LED strips?
RUclips randomly recommended your channel to me, and it's great! I plan on using the diffusing layers that come out of a flat panel tv/monitor, as DIY Perks did in one of his projects. Have you tried that before?
Nope, haven't! But I don't doubt they work great/better as they're designed for that :D
@@Zibartas my hope wit thè evolutionair of LED/ OLED s that in te future thee Will besingle large emitter/emitters that emits asoft non-glate Light similar to The expensive OLED lightpanels though thistyping I Own 2 OLED panels 1osram readinglight rl101 Made in Germany runs on battery second. Akit runs on mainspower here in Europe 230V 50Hz aLG (chem or display ) OLED panel i have to say f*cking awesome😉😉but yeah expensive somen are 180 aan 200buck💶💵hoever i was Lucky that igot it from a Friend knownperson😁😁