Very helpful information! I appreciate you taking the time to demonstrate how easy the ESM is to replace and for explaining the Technical Service Bulletin for the 2015 ESM.
I recently had an ESM replaced in my 2015 Chrysler 300. A couple of weeks later I experienced a problem with a malfunction of some kind, whereas the car started smoking heavily and oil and transmission fluid covered every component under the hood heavily.
Hello, is this usually wax fixes, the 2015 model going my fault code pops on screen as - service transmission performance shifting unavailable and check engine light
My 2015 Chrysler 300 is not blowing cold air. I took it to Firestone cuz i thought it might need a freon recharge, but they told be that the refrigerant levels looked fine. They said it could be the control dash. They said it was a common issue in my car model. They also told me the temperature on the driver side doesn't change (neither cold nor hot). The temperature on the passenger side can only be hot, but not cold. Do you have a video replcing the hvac module? Or can you make one? I read online it might also be a blend door. Any help is appreciated. Thank you.
Turned out to be the battery. They said it got low enough to trigger the service shifter fault. Dealer attempted to charge $325CDN+ tax for another battery and labor. Went to Costco and got a battery for $145CDN + tax and changed it myself. No shifter error now.
I have a 2015 Chrysler 300s and it has performed beautifully for nearly 200,000 miles, with regular maintenance and normal wear and tear and replacement. Just recently, while driving, I noticed that the ESM and immediately surrounding center console had dropped about 3/4 inch and was no longer sealed. Before having it towed to the dealer (and risk being advised that I need a new ESM), it looks like a simple job to snap things back into place with a few simple tools. Am I missing anything? Do I need any particular type of snaps or gasket"
I have a 2015 Chrysler 300C AWD and have had this service shifter error twice now. First time the module was replaced. Happened again and car would not start. Had to have it towed. Have a feeling it will have to be replaced again. There was also a recall to add the auto park function which my vehicles does not currently have installed. These ESMs must be problematic.
Personally I have only replaced maybe 3 of those since they came out. Not very common an issue. Your issue could be caused by something else this time and not related to the ESM. Wont know until diag is performed. We have been doing alot of the software updates for that auto park feature these days on alot of models. The Auto Park is mainly to prevent people from hurting themselves or others by them not putting the trans in park when getting out.....so we have to add features to do it for them. Thanks John for watching and for commenting. Make sure to subscribe if you havent already.
My car Nose maybe that is because when it accelerates at 27mph it pulls it does not grip the acceleration well I do not know what advice would you give me maybe this is 300 2015
Did the customer encounter the error message to service shifter? That is the message I am getting on my 300. It only has 5k miles on it, so I wanted to see what the process was. Thank you!
+Melissa Calley Evening.....I do believe it had the service shifter message. But keep there can be multiple causes that can cause that message to appear. There will be a code or codes set when the issue happened. Having the codes checked is very important and will tell us the next step. You may need a high dollar scanner that can access all the modules inorder to retrieve the codes. Thank you for watching and make sure to subscribe
I have a 2019 Chrysler 300 S. My car goes in reverse then tells me to put it in park to select gear. It reverse for a second and then stop. And give me the above message. Should I replace the ESM before dealing with the TCM?
Ok I have 2016 Chrysler 300 and I keep getting a error message that says service shifter is this the same thing and do u replace modular (the grey box) and that’s it
Can I put that exact shifter on my Chrysler 300 i have a 2013 300 and the shifter I have not really responsive at times I wanna know if it's possible to replace that shifter with a newer year shifter thanks man...
I havent see where it is possible yet. A few have asked and when searching online....nothing comes up. Looks like most likely not. Thanks for watching and for the question. Make sure to subscribe and check out my other videos.
My 2014 chrysler 300S with 70,000 miles shifter is offline and not communicating with the transmission module(according to the dealer) it is stuck in Drive, warning light on dash says "service transmission continue in D do not shift" car wont turn on anymore. Do you think changing the shifting module will fix this issue?
Sorry for the delay. There is a chance that is the issue but I highly recommend having it checked further before replacing any parts. I dont want to see you wasting money on parts not needed. Its not a common issue but I have replaced 1-2 over the years for different reasons. Thanks for asking and make sure to subscribe.
MotorCity Mechanic Thanks for the reply I was able to find a really good mechanic shop who checked out my car for free and took apart the modules for testing...he fixed everything for me I spent $1500 I replaced the wiring harness, the body control module(BCM) and the steering wheel clock spring module now the car is completely running like it’s brand new with no issues.
Can this cause a clicking noise when put the car in park from reverse. I have a 2017 300s and when I put it in park you can hear a click like a solenoid is engaging. But its louder than usual and is heard from outside the vehicle
I have a 2015 Chrysler 300 and I recently had the service shifter message, the topic of the service shifter isn’t very talked about much and so I’m asking you if replacing the module will fix the error
The service shifter message is like a check engine light. It lets us know there is an issue but from there we need to scan for codes and diag what ever we find. Replacing the shifter itself would be a guess and then you might still have issues. You need to get access to a scanner that can scan all the modules including the shifter. Basic code readers will not be able to do that. Thanks for asking and for watching. Make sure to subscribe.
When replacing the esm do I have to disconnect the battery or it wouldn’t matter because I was reading some cars in their newer generation needs to get restart the program when doing anything electrical
Can it be removed while car is still on my car won’t shift into park I believe the shifter is broken it not going into park won’t allow me to turn the car off.
i like the dodge charger shifter better than the 300's, can you replace a 15 Chrysler rotary nob, shifter, with the 15 dodge charger shifter. would love to see a video of the work. also, is there ay way to replace the 300's grill. thanks,and love your videos and i just subscribed to your channel.
HIMI2003 I haven't heard of any one swapping out the different shifters. I would think that its not possible but I cant be 100% certain. I have replaced the grills on the previous body style 300's (LX) but not the newer body style as of yet. It seemed common to install the grills before but now that you mention it....not on the newer 300's. I will try to keep the video request in mind if I ever come across these repairs. I do appreciate you watching the videos and for subscribing.
Hey hopefully you respond to this comment or anyone that had this issue, my gears on my 2015 Chrysler 300 having issues, as soon as I’m on 7 gear it jumps back to 6 even if I’m accelerating and just starts to jerk, not wanting to accelerate good.
Can u replace a 2015 Chrysler 200 ? I have no power in my middle console . I was told that my control modules need to be replaced and go to dodge ! Please help me
Hi 👋. I have craysler 200. 2015. Yesterday and the night. My car no star. I put new battery. In the dashboard ...Coming one massager. Shift service. ... Same craysler 300 of you video Maybe the problem is the electronic shifter. Tank. MotorCity.
I havent see it done yet. I dont feel its possible but I havent tried it myself so I cant fully rule it out. Thanks for asking and for watching. Make sure to subscribe.
I'm having issue with my uconnect if you accidentally switch to radio and try switching back to bluetooth the songs wont play. I have to shut radio off and reconnect to play songs from my phone
The first thing I recommend when it comes to these radios is having them checked to see if they need to be updated. There are different updates that fix alot of different items. The dealer has the ability to check and download the update. Thats where I would first start. Thanks for watching Noel and make sure to subscribe
I had this issue today. I made sure all the fuses were seated, and disconnected my battery. after about 20 minutes, hooked everything up and my car shifts out of park. I drove it about 40ish miles with no issues home. when i got home, i shifted through the gears, put it in park and turned it off. After about 20 mins, went out, started it up and everything seems to be normal and fine. no error codes, service shifter message has not come back.
No check engine light or transmission light. It lurches forward from 1st to 2nd gear search for gears at 35mph and has the worst throttle response to name several problems. It has been reflashed. MPG is suffering due to erratic shifts.
Can not duplicate is what I am told about my 2015 Jeep Cherokee 3.2L with the 9 speed transmission. only 2228 miles on it and since purchase it does not operate properly. What have you heard on either updates or transmission replacements for these.
No check engine light Just hard shifting lack of throttle response constant searching for gears causing terrible fuel economy and being stuck in gear a lot 3rd to 4th. This cant be normal operation. I have looked into their inertia sensors on line no info retrieved yet. I need schematics to see circuit design along with CAD/CAM design for their fluid dynamics for fluid flow. Can not find.
I need to eventually do a video on this removal.....its just lengthy to do it by words alone. I will keep it in mind as a future video. Make sure to subscribe and enjoy the weekend.
As far as I know......no.I dont see how it will work with the current set up. The wiring and all the mechanism is different. Thanks for the question. Make sure to subscribe
Roberto Ramirez honestly couldn’t tell you....that falls into a grey area that’s not mentioned by Chrysler and I haven’t tried it personally to see if it makes any difference or causes any issues
Reading the diag info for that trans.....they state to make sure the trans fluid level is correct, if okay then replaced the valve body and if still no change....the transmission. They dont let us make any internal repairs and its the process they make us go thru. That was just a quick check.....I would need to know the year, make, and model to be more accurate
I just had trans lines bust, fluid everywhere,switched those out,put trans fluid to correct level now the engine light is on ,the o2 sensor needs replacement I’m thinking cause it got fluid all over it 🤷🏻♂️ that’s why the 02 sensor went on But when I towed it I did engage the parking bypass lever
Rayan Saab Only fluid I have any experience with is the OEM fluid. I did an older video showing how to check the level and included the part number as well of the fluid. Here is a link to the video: Chrysler 200 9-speed transmission fluid level check ruclips.net/video/5_KZ_E_QzpU/видео.html
+mark lim I wish there was but everything has been taken out of our hands. Everything is software these days and we have no means at the dealership level to make any changes to the program other than with Chrysler makes available.
Its too early to say if it will or not. The first step will be to check for codes using a scanner that can access all the modules and then run what ever tests are needed based on that code. I dont want to have you buying expensive parts to find out they didnt fix the issue. Diag will be needed. Thanks for watching and for the question. Make sure to subscribe.
Sorry but you cant....the shifter is specific to that vehicle and that trans setup. Nothing else will work. Thanks Tony for the question and make sure to subscribe!
Its going to be different for each year/make/model. To make sure your getting the latest and greatest I recommend contacting the parts department at your local dealer and give them your VIN and they will get you the newest part number. Thanks for asking and for being a subscriber
Okay yall let me help some of y’all just incase y’all goin through the same situation as me. So I spilled drink in my cup holder before & a day later my car started tripping bad, every service light came on, windshield wipers, emergency lights, messages saying service shifter, & don’t put car in park until you reach destination, so boom eventually same day I had it towed to a shop, the business seemed to be a pretty reputable business, WRONG they was janky asf.. anyways the charges like $180 to look at the car I’m not trippin as long as it goes toward the service but it didn’t yall I spent nearly $600 on them “ finding a diagnosis itself cause they claim they had to take the whole car apart! Long story short whole time it’s the shifter like the message on the dash indicated in the first place, they replaced it the message saying service shifter stayed on for about 5 days but eventually went off. So $1300 later It was fixed, Anywho what brought me to this video is it literally just happened again to me yesterday only this time I’m about to fix it myself! Lesson of the day please don’t spill nothing in your cup holder! I have a 2015 Chrysler 300 the base one. Oh Yeaa I found a video just now b4 this one about the same thing happening & they cleaned the harnes thst connected to the shifter thingy & it worked so hopefully on a cheaper solution ima try that first.
I havent seen the knob itself removed.....at the dealership that only way it comes is as a complete assembly. I will try to keep it in mind the next time I have to replace one to try to see how its attached and then possibly film it. Thanks for the question and make sure to subscribe
Abdulsalam Saad Eldeen Afternoon, if the vehicle has a NAG transmission than the TCM will be located just above the gas and brake pedals. You have to remove the trim panel below the steering column on the dash to access it.
Abdulsalam Saad Eldeen the info I gave you was for a NAG transmission. To help you more accurately.....I need to know what engine the Charger has. Thanks
Very helpful information! I appreciate you taking the time to demonstrate how easy the ESM is to replace and for explaining the Technical Service Bulletin for the 2015 ESM.
Appreciated Brandon. Thanks for watching and dont forget to subscribe!
This was very helpful. Thank you so much.
I recently had an ESM replaced in my 2015 Chrysler 300. A couple of weeks later I experienced a problem with a malfunction of some kind, whereas the car started smoking heavily and oil and transmission fluid covered every component under the hood heavily.
WOW YOU ARE A ROCKSTAR. THANK YOU. MY 300 KICKS OUT OF GEAR AT ANY MOMENT. ITS SCARY.
Hello, is this usually wax fixes, the 2015 model going my fault code pops on screen as - service transmission performance shifting unavailable and check engine light
My new chylser 300 jerk when I’m changing gear to R or D can you tell me what it could be ?
My 2015 Chrysler 300 is not blowing cold air. I took it to Firestone cuz i thought it might need a freon recharge, but they told be that the refrigerant levels looked fine. They said it could be the control dash. They said it was a common issue in my car model. They also told me the temperature on the driver side doesn't change (neither cold nor hot). The temperature on the passenger side can only be hot, but not cold. Do you have a video replcing the hvac module? Or can you make one? I read online it might also be a blend door.
Any help is appreciated. Thank you.
Would that cause all the lights to come on and mileage to flash and vehicle to stay in neutral 2015 200
Turned out to be the battery. They said it got low enough to trigger the service shifter fault. Dealer attempted to charge $325CDN+ tax for another battery and labor. Went to Costco and got a battery for $145CDN + tax and changed it myself. No shifter error now.
I just bought two batteries from there for my Dodge 3500....good prices on batteries for sure. Thanks for the update.
Good job sir,always enjoy your videos, very informative
I have a 2015 Chrysler 300s and it has performed beautifully for nearly 200,000 miles, with regular maintenance and normal wear and tear and replacement. Just recently, while driving, I noticed that the ESM and immediately surrounding center console had dropped about 3/4 inch and was no longer sealed. Before having it towed to the dealer (and risk being advised that I need a new ESM), it looks like a simple job to snap things back into place with a few simple tools. Am I missing anything? Do I need any particular type of snaps or gasket"
I have a 2015 Chrysler 300C AWD and have had this service shifter error twice now. First time the module was replaced. Happened again and car would not start. Had to have it towed. Have a feeling it will have to be replaced again. There was also a recall to add the auto park function which my vehicles does not currently have installed. These ESMs must be problematic.
Personally I have only replaced maybe 3 of those since they came out. Not very common an issue. Your issue could be caused by something else this time and not related to the ESM. Wont know until diag is performed. We have been doing alot of the software updates for that auto park feature these days on alot of models. The Auto Park is mainly to prevent people from hurting themselves or others by them not putting the trans in park when getting out.....so we have to add features to do it for them. Thanks John for watching and for commenting. Make sure to subscribe if you havent already.
Is it possible to shift to neutral without a running engine, in order to relocate the vehicle?
Luv the trim sticks
My car Nose maybe that is because when it accelerates at 27mph it pulls it does not grip the acceleration well I do not know what advice would you give me maybe this is 300 2015
Did the customer encounter the error message to service shifter? That is the message I am getting on my 300. It only has 5k miles on it, so I wanted to see what the process was. Thank you!
+Melissa Calley Evening.....I do believe it had the service shifter message. But keep there can be multiple causes that can cause that message to appear. There will be a code or codes set when the issue happened. Having the codes checked is very important and will tell us the next step. You may need a high dollar scanner that can access all the modules inorder to retrieve the codes. Thank you for watching and make sure to subscribe
what are the symptoms that would make you want to replace the module?
On this one there would have been codes set and a possible shifter related message on the cluster.
I have a 2019 Chrysler 300 S. My car goes in reverse then tells me to put it in park to select gear. It reverse for a second and then stop. And give me the above message. Should I replace the ESM before dealing with the TCM?
Ok I have 2016 Chrysler 300 and I keep getting a error message that says service shifter is this the same thing and do u replace modular (the grey box) and that’s it
Do you have a video on how to remove cup holders? Im trying to add the heated and cooled cup holders to my 2015 chrysler 300
I currently dont.....I will place it on the "to film" list. Appreciate the request and thanks for asking.
Did you have to disconnect the battery for this? Does that cause any issue with locks, or radio not working after disconnecting the battery?
I have a question how much would it be to get that done in a mechanic ? Is it really about 8000-9000 ?
Can I put that exact shifter on my Chrysler 300 i have a 2013 300 and the shifter I have not really responsive at times I wanna know if it's possible to replace that shifter with a newer year shifter thanks man...
I havent see where it is possible yet. A few have asked and when searching online....nothing comes up. Looks like most likely not. Thanks for watching and for the question. Make sure to subscribe and check out my other videos.
Did you ever find out if it’s possible?
My 2014 chrysler 300S with 70,000 miles shifter is offline and not communicating with the transmission module(according to the dealer) it is stuck in Drive, warning light on dash says "service transmission continue in D do not shift" car wont turn on anymore. Do you think changing the shifting module will fix this issue?
Sorry for the delay. There is a chance that is the issue but I highly recommend having it checked further before replacing any parts. I dont want to see you wasting money on parts not needed. Its not a common issue but I have replaced 1-2 over the years for different reasons. Thanks for asking and make sure to subscribe.
MotorCity Mechanic Thanks for the reply I was able to find a really good mechanic shop who checked out my car for free and took apart the modules for testing...he fixed everything for me I spent $1500 I replaced the wiring harness, the body control module(BCM) and the steering wheel clock spring module now the car is completely running like it’s brand new with no issues.
@@detroitrebuildz5748 Sorry for the delay.......thanks for the update and glad it turned out great in the end.
good job !
Thank you very much! Make sure to subscribe
HELLO IM SITTING HERE I.N MY CAR AND THE CHECK ENGINE LIFHT IS ON AND IT WONT SHIFT HOW DO I USE THE GEAR SHIFTER THATS NEXT TO THE KNOB
Can this cause a clicking noise when put the car in park from reverse. I have a 2017 300s and when I put it in park you can hear a click like a solenoid is engaging. But its louder than usual and is heard from outside the vehicle
Thank you for the video
I have a 2015 Chrysler 300 and I recently had the service shifter message, the topic of the service shifter isn’t very talked about much and so I’m asking you if replacing the module will fix the error
The service shifter message is like a check engine light. It lets us know there is an issue but from there we need to scan for codes and diag what ever we find. Replacing the shifter itself would be a guess and then you might still have issues. You need to get access to a scanner that can scan all the modules including the shifter. Basic code readers will not be able to do that. Thanks for asking and for watching. Make sure to subscribe.
When replacing the esm do I have to disconnect the battery or it wouldn’t matter because I was reading some cars in their newer generation needs to get restart the program when doing anything electrical
Can it be removed while car is still on my car won’t shift into park I believe the shifter is broken it not going into park won’t allow me to turn the car off.
Its hard to say at the moment. Too many possible causes. Using the shifter override wont have any affect on this issue.
Mine just started this not going into park what did you do to rectify the problem?
Do you have a video in aseptic you went to far and opened it up and now can't close It s.m.h.
i like the dodge charger shifter better than the 300's, can you replace a 15 Chrysler rotary nob, shifter, with the 15 dodge charger shifter. would love to see a video of the work. also, is there ay way to replace the 300's grill. thanks,and love your videos and i just subscribed to your channel.
HIMI2003 I haven't heard of any one swapping out the different shifters. I would think that its not possible but I cant be 100% certain. I have replaced the grills on the previous body style 300's (LX) but not the newer body style as of yet. It seemed common to install the grills before but now that you mention it....not on the newer 300's. I will try to keep the video request in mind if I ever come across these repairs. I do appreciate you watching the videos and for subscribing.
Also your video are very helpful
Hey hopefully you respond to this comment or anyone that had this issue, my gears on my 2015 Chrysler 300 having issues, as soon as I’m on 7 gear it jumps back to 6 even if I’m accelerating and just starts to jerk, not wanting to accelerate good.
Can u replace a 2015 Chrysler 200 ? I have no power in my middle console . I was told that my control modules need to be replaced and go to dodge ! Please help me
My girlfriend's 300 sometimes you select drive and it says it's in park and wouldn't go. Would this module cause that problem
Hello Hello your videos a great thank so much my name is Miguel from lake Elsinore CA
Hi 👋. I have craysler 200. 2015. Yesterday and the night. My car no star. I put new battery. In the dashboard ...Coming one massager. Shift service. ... Same craysler 300 of you video Maybe the problem is the electronic shifter. Tank. MotorCity.
Denis Martinez I’m having the same problem now
Can of pop explode in the car
Now the shifter light came on
How would you go about cleaning it
Does this apply to a 2016 Chrysler 200?
Can that shifter fit on a 2012 Chrysler 300
Very helpful sir.
Thanks Carlos! I appreciate the feedback. Make sure to subscribe.
Can you convert the knob to a hand held shifter? Because I hate it, a really dumb idea
I havent see it done yet. I dont feel its possible but I havent tried it myself so I cant fully rule it out. Thanks for asking and for watching. Make sure to subscribe.
Is that a gear shifter next to the knob that I can engage?
I replaced my shifter and im being able to drive now but when I go to my message box it still says service shifter. Do I need to reset car?
I'm having issue with my uconnect if you accidentally switch to radio and try switching back to bluetooth the songs wont play. I have to shut radio off and reconnect to play songs from my phone
The first thing I recommend when it comes to these radios is having them checked to see if they need to be updated. There are different updates that fix alot of different items. The dealer has the ability to check and download the update. Thats where I would first start. Thanks for watching Noel and make sure to subscribe
Would this apply to the 2015 Chrysler 200?
It will be very close to being the same. Thanks for asking and make sure to subscribe
Wemt to start leave the house in my 2017 300c. And went to shift to reverse and the knob wont shift outof park. Help?
I had this issue today. I made sure all the fuses were seated, and disconnected my battery. after about 20 minutes, hooked everything up and my car shifts out of park. I drove it about 40ish miles with no issues home. when i got home, i shifted through the gears, put it in park and turned it off. After about 20 mins, went out, started it up and everything seems to be normal and fine. no error codes, service shifter message has not come back.
I have a 2016 chrysler 300c and i wont start but my knob just clicks what does that mean or your best theory behind it
Having this same issue only my car won’t crank
No check engine light or transmission light. It lurches forward from 1st to 2nd gear search for gears at 35mph and has the worst throttle response to name several problems. It has been reflashed. MPG is suffering due to erratic shifts.
my car has the same, what was the solution you did to repair it?
Can not duplicate is what I am told about my 2015 Jeep Cherokee 3.2L with the 9 speed transmission. only 2228 miles on it and since purchase it does not operate properly. What have you heard on either updates or transmission replacements for these.
What issues are you having? Check engine light coming on?
No check engine light Just hard shifting lack of throttle response constant searching for gears causing terrible fuel economy and being stuck in gear a lot 3rd to 4th. This cant be normal operation. I have looked into their inertia sensors on line no info retrieved yet. I need schematics to see circuit design along with CAD/CAM design for their fluid dynamics for fluid flow. Can not find.
can you direct me who to remove the whole center console? thanks!
I need to eventually do a video on this removal.....its just lengthy to do it by words alone. I will keep it in mind as a future video. Make sure to subscribe and enjoy the weekend.
is it possible to retrofit an actual gear shift knob? like replace it with an old fashion automatic stick.
As far as I know......no.I dont see how it will work with the current set up. The wiring and all the mechanism is different. Thanks for the question. Make sure to subscribe
Dear why you change electronic shift module what was the problem
Its an older video and I cant remember what the exact reason was.....I assume it was related to a code that I had found.
My Chrysler 300 has L gear inside of S what happens if I replace mines to the gear knob to the one that has Sport mode???
Roberto Ramirez honestly couldn’t tell you....that falls into a grey area that’s not mentioned by Chrysler and I haven’t tried it personally to see if it makes any difference or causes any issues
MotorCity Mechanic welp that a video idea for you
Roberto Ramirez I will certainly keep it in mind
Nothing happens still goes into s
Is everything plug n play? Does it need any kind of programming?
I'm going through your question right now and as of last night the dealership said it would but they would confirm with me today
When put in gear why does the light bl I nk
Any body know why my 2018 Chrysler 300s turn off when I remove my feet from brake pedal but the car start when I push the brake pedal down
Can you install the Chrysler 300 ESM into dodge charger? thanks a lot
As far as I know......I would say no. I havent done it myself so I cant be 100% sure.
@@MotorCityMechanic I just hate Dodge electronic shift
One of the codes says P1B14 Park-by-wire unintended park position
What does that mean
Reading the diag info for that trans.....they state to make sure the trans fluid level is correct, if okay then replaced the valve body and if still no change....the transmission. They dont let us make any internal repairs and its the process they make us go thru. That was just a quick check.....I would need to know the year, make, and model to be more accurate
2015 Chrysler 300c
I just had trans lines bust, fluid everywhere,switched those out,put trans fluid to correct level now the engine light is on ,the o2 sensor needs replacement
I’m thinking cause it got fluid all over it 🤷🏻♂️ that’s why the 02 sensor went on
But when I towed it I did engage the parking bypass lever
What is the best transmission fluid for chrysler 200 2016 nine speed?
Rayan Saab Only fluid I have any experience with is the OEM fluid. I did an older video showing how to check the level and included the part number as well of the fluid. Here is a link to the video: Chrysler 200 9-speed transmission fluid level check ruclips.net/video/5_KZ_E_QzpU/видео.html
Thank you very much, i learned more things from your vedioes.
Rayan Saab Many thanks Rayan!
Hi, is there a way to make that 8 speed shifts faster like the one in the Hellcats? Tnx
+mark lim I wish there was but everything has been taken out of our hands. Everything is software these days and we have no means at the dealership level to make any changes to the program other than with Chrysler makes available.
It shifts twice as fast in sport mode, 200ms instead of 400ms
This helps
My car 13 Chrysler is stuck in Drive would this be something that could resolve.
Its too early to say if it will or not. The first step will be to check for codes using a scanner that can access all the modules and then run what ever tests are needed based on that code. I dont want to have you buying expensive parts to find out they didnt fix the issue. Diag will be needed. Thanks for watching and for the question. Make sure to subscribe.
My friend i have service shifter problem how can i fixed it do you have any information to fixed it which way i can to do it .
Had a recall and on the shifter and was repaired free
Carl Goode what you do it to fix this problem
anyone swapped a t handle style shifter instead of putting a dial back on??
Ya veo es fácil de quitar pa la otra lo transmites en español
Could you put a Dodge Charger shifter as a replacement instead of the rotary?
Sorry but you cant....the shifter is specific to that vehicle and that trans setup. Nothing else will work. Thanks Tony for the question and make sure to subscribe!
Thanks for the answer. I hate that rotary shifter. It’s too bad you can’t replace it.
Yeah I am not that crazy about it either. Have a great weekend
Does it have to get programmed?????
No it doesn't
Is that shifting even safe? Seems a little bit scary to me.
Its the emergency override incase of an electerical failure in order to get the car moved or towed. Not for normal usage. So its safe in emergencies
I have 2013 300 car won't stay in drive goes in park
Did you not reprogram the new one??
No
what is the part# for 2016
Its going to be different for each year/make/model. To make sure your getting the latest and greatest I recommend contacting the parts department at your local dealer and give them your VIN and they will get you the newest part number. Thanks for asking and for being a subscriber
This was the part number for my 2016 300c based off my vin
(56054498ag)
@@antwanwilliams6893 THANK YOU
Where can u get the part from
Okay yall let me help some of y’all just incase y’all goin through the same situation as me.
So I spilled drink in my cup holder before & a day later my car started tripping bad, every service light came on, windshield wipers, emergency lights, messages saying service shifter, & don’t put car in park until you reach destination, so boom eventually same day I had it towed to a shop, the business seemed to be a pretty reputable business, WRONG they was janky asf.. anyways the charges like $180 to look at the car I’m not trippin as long as it goes toward the service but it didn’t yall I spent nearly $600 on them “ finding a diagnosis itself cause they claim they had to take the whole car apart! Long story short whole time it’s the shifter like the message on the dash indicated in the first place, they replaced it the message saying service shifter stayed on for about 5 days but eventually went off. So $1300 later It was fixed, Anywho what brought me to this video is it literally just happened again to me yesterday only this time I’m about to fix it myself! Lesson of the day please don’t spill nothing in your cup holder! I have a 2015 Chrysler 300 the base one.
Oh Yeaa I found a video just now b4 this one about the same thing happening & they cleaned the harnes thst connected to the shifter thingy & it worked so hopefully on a cheaper solution ima try that first.
& another thing my car would not move or start!
I think I broke my neutral release cable
I’m unable to reprogram it
Mechanic replaced the damaged one but he says he’s unable to reprogram it . Any idea why?
I was going to find in this video a way to just remove the knob. can you provide the steps to just remove knob?
I havent seen the knob itself removed.....at the dealership that only way it comes is as a complete assembly. I will try to keep it in mind the next time I have to replace one to try to see how its attached and then possibly film it. Thanks for the question and make sure to subscribe
Where is the TCM dodge chager 2013
Abdulsalam Saad Eldeen Afternoon, if the vehicle has a NAG transmission than the TCM will be located just above the gas and brake pedals. You have to remove the trim panel below the steering column on the dash to access it.
MotorCity Mechanic I did not find him
The car doesn't work and it shows error U0101
the info I gave you was for a NAG transmission. To help you more accurately.....I need to know what engine the Charger has. Thanks
Abdulsalam Saad Eldeen
the info I gave you was for a NAG transmission. To help you more accurately.....I need to know what engine the Charger has. Thanks
intensive purposes?