How to Replace Intake Manifold Gasket 2000-2006 Toyota Tundra

Buy Now!
New Intake Manifold Gasket Set from 1AAuto.com 1aau.to/ia/1AEGS00349
This video shows you how to install a new TRQ intake manifold gasket in your 2000-2006 Toyota Tundra. Gaskets help seal joints between components in places where you don’t want air, or fluids leaking out of that seal. Rubber or silicone gaskets may dry out or harden over time, reducing their effectiveness.
This process should be similar on the following vehicles:
2000 Toyota Tundra
2001 Toyota Tundra
2002 Toyota Tundra
2003 Toyota Tundra
2004 Toyota Tundra
2005 Toyota Tundra
2006 Toyota Tundra
Tools you will need:
• 10mm Socket 1aau.to/obfp/1AXAA00017
• 12mm Socket 1aau.to/obzE/1AXAA00015
• Trim Tool Set 1aau.to/oaeI/1AXXX00006
• Vacuum
• Needle nose pliers 1aau.to/oEk/1AXAA00051
• Needle nose pliers 1aau.to/oEk/1AXAA00052
• Pliers
• Ratchet 1aau.to/obEX/1AXAA00016
• Torque Wrench 1aau.to/oaIS/1AXAA00044
• Brake Parts Cleaner
• Cloth Rags 1aau.to/oDE/1AXSS00035
• Gloves 1aau.to/oaeT/1AXSS00048
• Magnet - Extendable
• Razor Blade / Gasket Scraper 1aau.to/ojD/1AXAA00280
Subscribe: / @trq
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

[@TRQ]

√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money

[@dansklrvids7303]

The position of that starter motor boggles the brain... great video

[@gyffjogofl7676]

The starter is clean and dry. They usually last 250-300k miles. Its actually a great spot for it.

[@joelgonzalez3609]

❤1 numero one

[@themechanic8195]

Hey everyone, if you see a coolant leak coming out of the rear of the engine, it may be the steel coolant hose under the intake manifold! It has a static oring seal that seems to get brittle with heat and age. Mine leaking when cold, full day job to do this in my poorly covered garage port. Might push it till the spring

[@alexlovette1727]

One of the studs for the 2 nuts in front broke on mine, anyone know where to get replacements? The other side the whole stud came out with the nut attached

[@alexanderstefanxandraswedi5835]

❤🎉😊