where do you get those 6.5s brackets? I have some Pionneer 5. 1/4s and want to get 6.5s components in that location, but i want GOOD SOLID brackets to cover the ENTIRE whole to make a decent "seal" around the new speakers. thanks. keep up the good work!
Those brackets came with the alpine SPS-610 speakers from Alpine. You can pick up civic specific brackets for this year from crutchfield, however, this customer vehicle didn't want to spend them money on them. They made a decent seal around the speaker, but even if you buy a better bracket, you will still have other "air" leaks through other holes in the door. If you want a better seal for mid bass, i highly recommend sound deadening the door.
great how you explain everything but you do it after it's already done. i would suggest getting a tripod or something so you can record yourself while you're doing this, from the start to finish, instead of having people wonder what you did before the vid for each section starts or between cuts.. just imo
Is there a seal around the entire door panel? Should we be applying anything to the seal while installing the panel back on? Also, any risk is taking sounds after panel is removed and installed back in?
How much space is there between the new speakers and the grill on the door skin, do you need to add anything to stop vibrations. One of the speakers on my wifes car the cone separated from the coil and makes a hell of a racket now. So I want to replace them but the few speakers I looked at today with their mounting ring give me the impression that I might have the door skin vibrating against the new speakers. And if I wanted to go a step further adding a small amp for the front speakers, where would be the best place for the amp, somewhere out of sight.
I’m surprised there was no problems! Usually when there is a stock speaker with a lifted plastic ring it’s to prevent the window from hitting the magnet when it’s all the way down!
I have this same car/year 2012. The speakers are ok but not great. If I get those Alpine without adding any Xtra power, front and back will it sound much better?
not accurate but around 110, factory honda speakers are shit, at 100W they start to buzz, if you go any higher sound becomes distorted, factory radio is not capable for getting them to this point though, only decent aftermarket one can
This model wasn't equipped with tweeters, so we didn't bother adding any. However, if you have a pair of tweeters in a component configuration, you can certainly replace them.
i was able to order the A pillars with the pre cut outs for the tweeters from the manufacturer for 2012 honda civic. Works great and easier than customizing existing A pillars. I believe the 2012 honda civic coupe a pillars have the cutouts but other models A pillars do not. www.crutchfield.com/S-pY0Laf00vMg/learn/2012-2015-honda-civic.html
NeATaNDtURdy the sound will sound clearer and have a higher range of lows and highs (depending on what kind of speaker you get), but it won’t be very much louder by just replacing the speaker itself. If you want loudness installing an amp is the way to go. Hope everything works out for ya
I ran into the same thing until i took a flathead screwdriver to the top where the mounting hole was on the speaker. It was stuck on there real good due to the adhesive they had on the back of said speaker.
I have a 2013 civic, and I wanna replace my speakers. Any recommendations. I want something with good bass and great sound but don’t want to get a sub.?? If you know anything ? How are the ones you use
Those alpines are very decent for power and clarity. You may also see a boost in performance if you amplify them as well. Alpine and Rockford Fosgate are good brands, but remember you get what you pay for and these speakers are necessarily designed for "bass" as they generally handle 80hz and up only.
@@ProvoBeastAudio what do you think of this ? www.amazon.com/18-Sound-6NM410B-Midrange-80HMS/dp/B017JCCQJE/ref=sr_1_4?crid=3BL3EUTMOIHEQ&keywords=18+sound+speaker&qid=1560182510&s=gateway&sprefix=18+so%2Caps%2C216&sr=8-4
It depends, if you purchase the American International HSB524, it will give you more space to fit speakers.If you go directly to the door panel, you lose about .5" mounting depth.
Parts used linked in the description of the video!
Saved me a ton of money.... did it myself, learned a lot, and saved me $300
Thank you so much!
Very helpful
Dam thank you for this upload ✊✊ would you happen to have a video for the Tweeter speakers?
On passger front I have grey and white which one is postive speaker wire
where do you get those 6.5s brackets? I have some Pionneer 5. 1/4s and want to get 6.5s components in that location, but i want GOOD SOLID brackets to cover the ENTIRE whole to make a decent "seal" around the new speakers. thanks. keep up the good work!
Those brackets came with the alpine SPS-610 speakers from Alpine. You can pick up civic specific brackets for this year from crutchfield, however, this customer vehicle didn't want to spend them money on them. They made a decent seal around the speaker, but even if you buy a better bracket, you will still have other "air" leaks through other holes in the door. If you want a better seal for mid bass, i highly recommend sound deadening the door.
great how you explain everything but you do it after it's already done. i would suggest getting a tripod or something so you can record yourself while you're doing this, from the start to finish, instead of having people wonder what you did before the vid for each section starts or between cuts.. just imo
Is there a seal around the entire door panel? Should we be applying anything to the seal while installing the panel back on? Also, any risk is taking sounds after panel is removed and installed back in?
Awesome
How much space is there between the new speakers and the grill on the door skin, do you need to add anything to stop vibrations. One of the speakers on my wifes car the cone separated from the coil and makes a hell of a racket now. So I want to replace them but the few speakers I looked at today with their mounting ring give me the impression that I might have the door skin vibrating against the new speakers. And if I wanted to go a step further adding a small amp for the front speakers, where would be the best place for the amp, somewhere out of sight.
What if you recommend that replacement to me, does it sound loud? What model are those speakers?
Can’t get the speaker to budge after removing the screw. Would be nice if you showed how to lift it out.
They are removed by pulling straight up (not outwards)
I’m surprised there was no problems! Usually when there is a stock speaker with a lifted plastic ring it’s to prevent the window from hitting the magnet when it’s all the way down!
With the supplied alpine adapter bracket, the mounting depth cleared the window regulator fine.
I have a 2001 Silverado and these are the hardest speakers too fing the 4by6 in the back of the truck
Are you talking about the single cab rear speakers?
I have this same car/year 2012. The speakers are ok but not great. If I get those Alpine without adding any Xtra power, front and back will it sound much better?
Adding an amplifier will make a difference, yes.
@@ProvoBeastAudioI just added those alpine to the civic.
dissapointed , don't see much difference so what simple amplifier
would it take
Is the factory stereo enough to power and obtain good quality sound with the new alpine speakers? Do I need an ampler for that? Thanks!
No, you would be better off adding an amp. These can handle up to 75w RMS and factory radios really only put out 10-15w RMS
Which is best speaker for front side ?
Whts the maximum watts u can get in 6.5" speakers?
Ik this is a old video but how many watts can the factory speaker take
not accurate but around 110, factory honda speakers are shit, at 100W they start to buzz, if you go any higher sound becomes distorted, factory radio is not capable for getting them to this point though, only decent aftermarket one can
What about the tweeters on the A pillars? Aren't those connected with the door speakers? A component setup?
This model wasn't equipped with tweeters, so we didn't bother adding any. However, if you have a pair of tweeters in a component configuration, you can certainly replace them.
i was able to order the A pillars with the pre cut outs for the tweeters from the manufacturer for 2012 honda civic. Works great and easier than customizing existing A pillars. I believe the 2012 honda civic coupe a pillars have the cutouts but other models A pillars do not. www.crutchfield.com/S-pY0Laf00vMg/learn/2012-2015-honda-civic.html
@@Rollotomassi099 what was the part numbers you order Brian?
Dumb question, but do you need to disconnect the battery before messing with the wiring or is it ok since the car ignition is off?
No, as long as the key is off, the radio is off. So no voltage is going to the speakers.
Is your windows down or up while installation ?
Doesn’t matter but mine were up
is it worth it without any amps? i really hate the speakers on my lx
NeATaNDtURdy the sound will sound clearer and have a higher range of lows and highs (depending on what kind of speaker you get), but it won’t be very much louder by just replacing the speaker itself. If you want loudness installing an amp is the way to go. Hope everything works out for ya
Did u get better audio with out needing to upgrade an amplifier?
Which wire on the passenger side is Positive? Grey or Brown?
Did u ever find out lol I’m wondering the same
Also am curious
Per Honda wiring diagram gray is positive on passenger door
You didn't show how to actually take the speaker out. I can't even do it. That would be helpful
Because its the easiest thing ever lol its a single bolt
You can’t do literally the easiest part of this video? But the other stuff just fine?
I ran into the same thing until i took a flathead screwdriver to the top where the mounting hole was on the speaker. It was stuck on there real good due to the adhesive they had on the back of said speaker.
I have a 2013 civic, and I wanna replace my speakers. Any recommendations. I want something with good bass and great sound but don’t want to get a sub.?? If you know anything ? How are the ones you use
Those alpines are very decent for power and clarity. You may also see a boost in performance if you amplify them as well. Alpine and Rockford Fosgate are good brands, but remember you get what you pay for and these speakers are necessarily designed for "bass" as they generally handle 80hz and up only.
Provo Beast Audio Installation
Which 6.5 would you recomend today?
Thinking about doing this on my car
Why wouldn’t you want to get a sub
Cause I want to but a woofer
Was it still the factory radio?
Yep it was, customer didn't want to replace the radio quite yet.
how does it sound ??
Outstanding! Customer was very happy.
Where is the best place to buy a new speaker
Amazon
@@ProvoBeastAudio what do you think of this ? www.amazon.com/18-Sound-6NM410B-Midrange-80HMS/dp/B017JCCQJE/ref=sr_1_4?crid=3BL3EUTMOIHEQ&keywords=18+sound+speaker&qid=1560182510&s=gateway&sprefix=18+so%2Caps%2C216&sr=8-4
Crutchfield
Can I also directly replace the tweakers and door speakers without a crossover?
you can as long as each speaker has a built in crossover
I want to buy 4 alpine speakers for my 2017 Honda Accord sport but I don’t know if this speakers will fit in from and in the back
Crutchfield.com will hook u up
How much clearance do you have as far as mounting depth
It depends, if you purchase the American International HSB524, it will give you more space to fit speakers.If you go directly to the door panel, you lose about .5" mounting depth.
which color is positive and which color is negative? Just asking for a friend :-)
See 2:22
thank you so much I don't know how I missed that. Your video is excellent.
passenger side polarity please
Without amp or with amp?
These run fine without an amp (like in the video), but they perform optimally when amplified with around 75w RMS @ 4 oms.
You didn’t share the sound 😂😂😂😂
We can't truly capture the sound quality with a mic which is why we rarely will give a "demo".