Never Clay Again!? Use This Soap System That Actually Cleans! (Labocosmetica 3 Ph Wash)
HTML-код
- Опубликовано: 25 авг 2024
- In this one we check out possibly the best soap system in the auto detailing space today! A soap that actually cleans and decontaminates the surface so well it can eliminate the need to Clay every vehicle!
Labocosmetica USA- www.labocosmet...
Amazon Links & Codes
All JTC’s Promotional Codes- superlink.io/j...
P&S Clean Maker- psdetailproduc...
Ultra Air Blaster- amzn.to/490YvbV
Ultra Air Blaster Plus-amzn.to/47zIGaY
Ultra Dressing Applicator-amzn.to/420nda3
Ultra Engine Blaster-amzn.to/3vFDt43
Omniwall System- amzn.to/3HnYjrj
IK Sprayers:
IK Foam Pro 12-amzn.to/3vriZMo
IK Multi Pro 12 (No Battery)- amzn.to/41Tt1Cc
IK Multi Pro 2+- amzn.to/41LRjxU
IK Multi Sprayer- amzn.to/48M3Jbn
IK Multi Mini 360- amzn.to/3S7pkp5
Wheel Bucket:
Detail Factory Tire Brush- amzn.to/3OeAEh1
Detail Factory Fender Well Brush- amzn.to/3S5HRC5
Wheel Mitt- amzn.to/4aJoAO6
Detail Brush- amzn.to/47ndM5E
Drill Brush- amzn.to/3S7Zt0r
Blue Ultra Brush- amzn.to/48ninWK
Ez Detail Brush- amzn.to/4berLh3
Wash Bucket:
Ultra Black Sponge- amzn.to/3vrLz0b
Wash Mitt-amzn.to/47pUjBf
Emblem Brush-amzn.to/41Plq7v
Blue Clay Towel-amzn.to/41RNxmv
Red Clay Towel- amzn.to/48pm9yG
Clay Scrubber-amzn.to/4aDs0C2s
Towels:
TRC FTW’s- amzn.to/41Ra7vA
TRC 1500 Drying Towel- amzn.to/3TT267E
TRC Gauntlet Drying Towel- amzn.to/48wDsOE
Liquid8er Drying Towel- amzn.to/4aQ15TS
Pressure Washer- amzn.to/3NUyKBY
MJJC Foam Cannon- amzn.to/47sgmqV
MTM Foam Cannon- amzn.to/3H6Nh9R
Mtm 4.0 Nozzle 40 Degree- amzn.to/41R5JNc
Mtm Nozzle 4.0 Nozzle 25 Degree- amzn.to/47qkzLN
MTM Hydro Foam Cannon Bundle: amzn.to/3HiAzop 
Развлечения
Eddie called it when he said labocosmetica is 🔥🔥
A phenomenal detail!!
💪💪
I have almost every product from them and I honestly have not a single bad thing to say about them. Love their window cleaner removes some hard water spots in the sun it’s crazy.
I was shocked at how well Labo 3ph cleaned my car!
Challenge for your running ceramic coating tests, use this system to maintain your coating performance without topping
You got it 💪🧼👀
I am sold. I have been for five weeks since Eddie's video that I watched on Christmas Day. A LITTLE gift from the Holy Spirit for me. Awesome. Thank you, Jamie, because I, too, am a huge fan of Crystal Wash. Each system is great, but I am leaning toward Labo.
Seems like a big winner to me 💪🧼
Labocosmetica is my happy place nothing beats this shit 💯
molto bene, labo e` magnifico!
Glad your finally getting around to it , looking forward to discussing your thoughts on it soon👌
Where have you been sourcing Labo stuff?
Welp you weren’t kidding lol stuff is epic
Ya it’s awesome great video - been saying this for half a year “ what’s your strongest soap “
A week later 3 boxes
😂
Wow that is an amazing and easy to use system! 🔥🔥
Perfect timing Jamie. Mine came in about a week ago. Labo is the real deal.
Nice this Labo brand is getting interesting 👊🏼
Doing God's work with Labo!
Can’t wait to get my hands on this line up! Great video JTC! 🤘
It’s Stupendous 🧼
Labocosmetica is my happy place 💙
I have it, and at MTE, since I talked to the guys in French, they gave me lots of additional products. Fantastic products!💪💪💪
Nice! David and Oliver are great. You probably saw Cody there too.
@hippopotimusstew and Reggie Cox when I was with Tim Mclaughlin, Harold Gonzalez and Adrian Ferreira (Detailed AF)
Nice to see some goodies from my country around the planet 😆are you gonna have the chance to try some more products from the lineup? That would be pretty interesting as well 🤔
Yea I have more stuff to check out! 💪🧼
Great video Jamie ,Labocosmetica looks like it’s doing work.
Purifica 10:1 in a pump sprayer is some strong stuff! I’ve been using it at a bit more than that in a foam cannon and it unclogs coatings at that strength, but that’s closer to 1:100 on the panel. Smells great too.
Very nice 👍
with that combo people can could save so much time its real eye opener 🔥💪
Exactly 💪🧼
@@JamieTheCleaner could you name all of the 3 products please?
Impressive results! Thank you for the demo video!
Wow I when I went to the website I thought id be seeing $50 a bottle. That's going to save an insane amount of time!
Right very well priced as well!
The only way to go prior to ceramic coating
I would think Sidero would be a better option than Purifica in a lot of situations as its a iron remover plus limescale remover, Primus 2.0 also a good stand alone wash soap. Primus good in a spray bottle as well besides foamer or foam cannon.
Yeah definitely, I don’t deal with much iron fallout I live in the country 👍
Labo for the win! 💯💪🏼
Wowsers...I am impressed!
It’s quite impressive 💪🧼
Great 👍video buddy tfs
Fantastic video showcasing products
Labocosmetica es una de las mejores marcas europeas para el cuidado del coche desde hace años, es una lástima que hayas tardado tanto en descubrirla. buen video.
I wish TRC would start carrying this line...
Bottles are "bland" and the names are hard to pronounce. To them it seems it's how marketable a product is rather than how well the chemicals perform
They don’t have much tbh
Nice!!!
Looks like it did a great job at decontaminating the paint. did you in fact ceramic coat the car after that wash or did you find that it needed more decon? great video! newer sub here.
Went straight into polishing and ceramic coating 👍
I've been thinking about firing up the mobile detailing machine here soon and this system looks promising because I want to offer a decontamination service without the iron remover/clay step for those entry level wash details. I also want to give P&S Crystal wash a shot as well but the Labocosmetica system "looks solid" (in Eddie's voice). Could KCx TEA be used similarly to the product you used except into a damp microfiber towel instead? Speaking of KCx, this winter I've been enjoying Green Star in my IK Pro 2. Previously I was using a spray bottle but the distribution from a pump up spray has been money! How cold was it man, you look like you were freezing bro, hahah.
Yea Tea would basically be the exact same thing as the stoner product a very safe target remover 👍🧼
This would probably be a good pre wash before the clay towel since clay towels realy are only good for light contamination.
Yep this is very true 💪🧼
For those who need this warning: especially with Purifica, please, PLEASE don't leave this on paint and let it dry without rinsing it, especially if it's used by itself independently of an alkaline wash like Primus. They can claim "universal safety" all they want, but it's made from sulphuric acid and ammonium bifluoride (essentially hydrofluoric acid + ammonia), even though the concentration seems to be pretty low. In testing it on a spare panel, I found that it will ABSOLUTELY etch and break down acrylic-poly clear coats if left unrinsed for long periods, even moreso if it is exposed to heat during that time.
Obviously, best practice would lead you to rinse any cleaning products from your vehicle after use, and this is put in combination with their alkaline wash (which is also *absolutely* corrosive, despite their constant claims otherwise, but I digress) for good reason: when used in combination, these two neutralize each other quite well. individually, however, or if left on the surface without a thorough agitation and rinse, either one can damage the vehicle's paint and many different polymer and wax-based coatings.
This might be common knowledge and seem like a given, and doesn't negate the effectiveness of the product when used properly. I'm all about both acidic and alkaline washes for different purposes, as long as they're used the right way. But their constant, ill-advised claims of being "100% safe" are misleading at best, and make me concerned that people who don't know better will wind up damaging their vehicles or their health because they were told not to worry without the context of correct chemical usage practices.
Yeah I don’t think anybody ever said spray purifica on your car and walk away 👍🧼 it’s VDA certified so it’s not just a claim they pull out their butt but when it comes to “letting it dry” it more along the lines of while your making it around the car to finish the wash it’s not gonna damage anything. Of course if you were to spray it on and just walk away yeah it’s most likely gonna do some damage. And they are the only company with an actual system that leads to a complete neutralization process, so that also Atleast to me deems Labo as the safest as well.
Ammonium bifluoride is some nasty stuff with hidden health affects. All acid based products can be formulated without it.
Why take so long to try this product out Jamie 🤷🏾♂️ this is the ticket to haven
Took me this long just to pronounce the name
@@JamieTheCleaner 😆 🤣
I'm curious how does it compare to this combo carpro lift+descale+reset?
Gran bel video, spieghi benissimo le capacità di questo sistema. Noi in Italia 🇮🇹 lo usiamo da anni con risultati magnifici. Finalmente anche voi oltre oceano lo state usando. Il nuovo Primus 2.0 è molto lubrificato e in caso necessari può essere usato anche in secchio 🪣. Purifica di solito la uso in foam e crea una bella coperta bianca. Forse Purifica 1:10 in spray è troppo concentrato, perché nella foam gun la uso a quella diluizione e mi trovo molto bene. Però proverò come hai fatto tu. Ti consiglio di provare anche il sistema di pulizia di interni Dictile e Glico, è un sistema 2ph.
I saw their products on Amazon last week, I don't see them on Amazon today. Maybe a glitch, or they chose to stop selling on Amazon.
I’m sure the Labo stuff is good, it’s just their naming convention that’s a head scratcher. You either have to remember what each thing does, or read the bottle each time. Even if you speak Italian, the product names don’t describe what they do.
come on man! Did you vote for biden haha jokes. Look over the main site for a few hours. Its the best site i ever seen from a manufacturer in regards to how to use the products.
If you can read , all the bottles have the mention whats.ths purpose on it 😜
I always use an iron decon on all my full details, so a clay mitt is no big deal. Because I apply the Yvan way. Not sure if adding more cost to this process is worth it? Remember, the more you spend, the less goes into your pocket $$$. More info. will be needed, keep us informed.
If you like to save on cost you should try labocosmetica Sidero gel ! Dillution is up 1 to 4 👌👌👌 also with limescale action
i would have liked to see the clay bar at the beginning of the video first though
Me too
@@JamieTheCleaner 🤷♂️🤣
That’s actually insane lol
How frequently could you use a line up such as this with a 3ph acid and 12 ph alkaline cleaner
You should only use this on the same vehicle as initial prep and every 6-12 month maintenance
maybe it might of been worth laying a small area before starting
Definitely 👍
Hi Jamie, would you put the Labo products on par with Bilt Hamber for pre-wash cleaning capability?
I’m gonna have to try the Bilt hamber
Jamie where did you get that pressure washer hose from? Mine coils up and wraps itself in loops. Yours looks to lay flat and stay out of your way. I'm jealous
@@thinkforyourself5672 its a cobrajet hose, amzn.to/4fky6cO
I just keep hearing Grimus from McDonald's lol
I love Grimace
@JamieTheCleaner just shows our age we know who it is lol 😆 This day and age, they would be more worried about Grimus being gender neutral than what it actually is.
Jaime,
Do you think this combination is better than p&s Perl and Crystal clear combo?
Thanks
Yeah this is some serious stuff I’m pretty dang impressed
Jamie, is Labo stuff available from any of the usual suspects or only direct from Labo? Thanks, love the chan.
Diluted properly, what would be the difference in using Primus 2.0 vs Ductile (APC) on wheels/tires?
Not sure I haven’t tried Primus on wheels yet 🤔
Have you tried Bilt Hamber auto foam
Never tried it 👍
🥱 9:26
Always use a clay barr doe never skip clay barr tfs
What in the world are you trying to say?
@@Buckyvw use the clay barr first
My man is a big fan of clay bars. @@Buckyvw
EC got his wish........
What was that? Lol
@@JamieTheCleaner he gotta be saying......I TOLD YOU...I TOLD YOU.....then he starts pronouncing all those italian names in puerto 🇵🇷 Rican
@@JP-vs8yl 😂 for sure