On The Go Portable Spotless Rinse Deionizer Review
HTML-код
- Опубликовано: 10 сен 2024
- Get a spot free rinse on your car using the ON THE GO Water Deionizer!
Below is a link to the deionizer model shown in the video as well as another link to others.
Don’t forget to use the coupon code: “WillsGarage” for 10% off!
www.portablewa...
www.portablewa...
Instagram: willsgarageofficial
Don't forget to use the coupon code: “WillsGarage” for 10% off!
thanks for a great video! The discount code still works in June 2024. Saves $30.00.
When pressuring DI tanks, do it slowly. You can float the bed and lose more resin.
Hello there, sir, get yourself and in flow water meter that you put on a quick connect from your input garden hose in between where you added to the DI input. They’re about $26 on Amazon and once you calibrate it you can see how many gallons, you’re actually putting through that DI tank before the resin wears out. What I found is many of the claims by these DI tank manufacturers, most of who are copying each other, are grossly exaggerated while I’ve also found one that is under representing it’s effectiveness. The good thing about these meters they can be reset, once you track consumption
Great idea, which DI system did you find was the best?
Do you have a link to those quick disconnects and that water split with spigot?
Very helpful Thank you!
Thanks for this. What’s your experience on how long the resin lasted?
Hi Will. Great video. May I ask where did you get that short sprayer for Sunjoe power washer?
Can you use a gas pressure washer ?
Hi, any way you could link the quick connects you used? I have the same setup but can't seem to find the right quick connects. Thanks!
Sure. Links below:
www.amazon.com/gp/product/B088LTFV88/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
www.amazon.com/dp/B0BXNV399K?ref=ppx_yo2ov_dt_b_product_details&th=1
www.amazon.com/gp/product/B081NHL9FC/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&th=1
Thanks! If u don't mind me asking, I have the same deionizer, how did u take off the black plastic piece tips? Do you just unscrew them?
So many comments with no reply...
Why did you turn the in-take valve to the “off” position prior to beginning the final spot-free rinse? Is the resin not able deionize the water fast enough if allowed to free flow?
It can deionize the water fast enough but would be a waste of resin. It's in "off" position to save the resin and only "on" for the final rinse.
@@WillsGarageOfficial and one tank full of deionized water is enough to complete a final rinse?
What wash cart is that? Thanks
It's the Luxor STC11-B model.
Great info. Video quality isn't great, not your fault its the sun.
Idk, looks like lot of effort and added cost. Rather use a wall mounted pressure washer to clean and rinse, then chamois off the flat surfaces and leaf blow dry.
Not if you have a 41' motorhome
You could've just ceramic-coated the car, and used leaf blower to dry it afer a regular wash in no time...this would be much quicker and definitely cheaper than going through this whole deionizer thing. Cheers.
Good point! Ceramic coated or not though, after this initial set up it will be as easy as rinse and go.
Ypu still get water spots that way. Trust me
@@Brian-dr2yiyep ceramic is prone to water spotting from what ive heard from a few companies
Thanks for putting this up. I looked at system that would be mounted inside a van and that was 6,000.
You can also go number 2 and not wipe your butt if you want to save time and money. Sometimes saving time and money isn't always the best option.