Does Your Dirt/Pit Bike Not Idle or Bogs A lot?
HTML-код
- Опубликовано: 12 ноя 2019
- Video Title: Does Your Dirt/Pit Bike Not Idle or Bogs A lot?
►Peace Moto XB87 - brozz250.com
►My Twitch - / exoticmotion
►My Twitter - / exoticmotion
►Music By Music Factory: www.musicfactory.tm
►Check Stats - fortnitetracker.com
►SUBSCRIBE! - / exoticmotion
►My Instagram - / jonmcallister
►SHARE THIS VIDEO
►Sponsor - triggerdevil.com
►►►USE CODE "ExoTic" FOR 5% OFF KONTROL FREEK
Thanks very much for all the support, it truly does mean the world to me! Every last inch of it encourages me to do more videos for you guys each and every day. 
Игры
That throttle screw trick just brought my bike back to life, thank you sir!
You need to seriously adjust the air/fuel mixture. Its SUPER rich. You need to turn the scren on the bottom IN to lean the idle mixture which will raise the idle also. One you reach max RPM doing that, adjust idle speed screw to the desired idle. it'll run MUICH better
How do you adjust that
How to you know it’s to rich
How do you adjust??
How to do?
Back brake my friend
Word😂
Wear some gear too... otherwise you'll end up turning yourself in to hamburger... Been there, done that... took most of the skin from my wrist to my elbow off... took weeks digging out all the sand and dirt embedded...
And the back brake can stop you from busting your ass
😂😂🤣 frfr no panic
Sometimes u miss it like on bicycle
When your choke is "closed" that means it's on, if the choke is "open" that means it's off.
👍
But who’s on first
@@idahoduckhunter Good lord bro, I was
just going to make the identical comment;
''who's on first'' 😲😲🤣🤣
AS SOON AS I HEAR HIS EXPLANATION....I STOPPED WATCHING...LOL
@@EvendimataE That's why I'm in the comments..... jeez
*wtf happened to your back brake in the intro lmao*
Dont think he uses it
He fucked up when he took his feet off the pegs
I dont have a bak brake
@@lifeononeweel3008then don’t wheelie😂
@@adoptmegod8896 i did anyway
Thanks a million, this fixed my problem, bike wouldn't idle for too long, it was just bog slowly unless I was giving it throttle
you are supposed to adjust the idle when the bike is warm and do it while it is running.
Adjust the pilot fuel screw if it's bogging or adjust needle clip positon! Idle does nothing to stop bogging all your doing is bypassing the pilot circuit and just lifting the slide. Do some research on how carbs work then I'll take ya seriously @exotic motion
@@mikesmotoshop 😆
Gas lol it’s the idle screw well it is on the ssr
@@mikesmotoshop any idea why my pit bike is getting hot to quick please
yeah but it wouldn't idle bud and he did warm it up lmao
Help to hit the back brake when you over wheelie prevents the intro 😂
Great content man! Bought my first bike and these videos help alot
5 seconds in and u hit me with that 😂
First video that actually helped ! Thanks bruh
I found on my bike the factory or dealer installed two extra gaskets between the carb and intake and the needle for the throttle need to be adjusted and then the idle screw a bit and now it starts and runs like a dream.
Exactly what I was looking for👌
So did you use the small or larger spring?
Any ideas why my pit bike is getting hot really quick please?? Great video on the carb
Hello, I have a similar Chinese bike, it’s a SSR do you think that screw trick will work on it?😃
Helped so much!!!! Thank you
Will this carb replacement work for the coolster 125?
Nice intro, good content, explained well 👍 thanks man
this dude is such a squid but I can't stop watching
Hey my Chinese bike starts only when I get carb spray with it and then later bogs our after 30 seconds max. Cleaned the carb new spark new fuel line. What should I try next? Haven’t used it in maybe 5 years
You are saying choke closed when you mean open and visa versa
excellent presentation. good teacher perfect pace.
Use back brake to bring bike down during wheeleys. Touch the rear brake to bring the front down
I brought a carb same as yours what size is y9ur jets my main one is 100 and pilot 38 it's not idlin properly
i have the same bike. Mine is an XMOTO anyway after i bought it i simpley replaced the cab and the bike was perfect since then i have crashed and i put the bike up for a while. thought about selling it but i reconsidered cause i like the bike so much and i wanted to learn to rebuild it. my issue is I got a new carb and it idles fine and its not to rich or lean its stoick (if thats the word) balanced but when I go into gear and accelerate the bike bogs. i have turned and twisted every screw and its still the same. my car engine blew and this could be my only transportation i have turned it street legal (i recommend is so nice) anyway im wondering if you have any shimes for me...gems to help me out. thanks
My 2018 SSR 150 keeps bogging. I can't get it to idle right either for you when I get it to run right it has a problem idling. I've cleaned the carburetor I've changed the Jets a size up and also a size down doesn't really make much of a difference. Should I just replace the carburetor?
The start of the video is exactly like my bike. It hasn’t been running for a year or two and I just got it started back up. Will try this!
If i open choke it still wont run, should i just clean the carb and see if its just drirty
When you adjust the idle screw always twist the throttle back, screwing in the idle screw with the slide down just causes the screw to dig into the slide
As in open throttle like you’re revving the bike?
@@fakeman1985 yeah
@@fakeman1985 Same question lol, like, wut?
haha.
DM, so pull the throttle to around 1/4 or so?
Sounds like a great tip, if true, and if true, my
slide should be dust at this point. Does this
issue damage the slide or the idle screw?
Both?
Is this a coolster 125cc?
I just put my Tao 140 together and it seems to cut off when it gets hot. What can cause that
Did putting the rite spring and slide in fix your problem?
Great video helped alot!!
thx for the video help i have a 1988 yamaha TW200 and i started it the same day i got it and it has a idle issue this helped it stop that crap
You just helped me fix my bike from idling to loud
So you didn't go over if it bogs lol. And that's exactly what's going on with mine.
That E46 tho! Got the same one but in Titansilber
He just comes back in the vid squeaking and get on and goes off no word said 😂
ikr 😂😂
It sounds good.& another thing is in those cases is that fiber glass repairing will be your best friend then. Especially for those reasons alone then bro. It'll save ya more money that way to.
My wpb 110 keeps bogging out, complete loss of power. Also happens when used in wet :/
And I drained the bowl on carb and fiddled with throttle screw thanks man
Dam bro you 12:00 clocked it got it running good sweet brappp💯💯✌️
Can u tell how to fix the spark plug if its gaps and when u drive it goes off
Hopefully thats all I need to mess with to get mine to idle! I just got a first run in today on my new RFZ nd still couldn't get it to idle after my run.
Nice wheely!!!🤧💨💨💨💨
Maybe I am wrong.... but you imply from the start that you open the choke to start your bike and I think you mean with your choke on and you are mixing up open and closed versus on and off.
You're intro is gold lol
Great for if yours doesn't have a thrttole screw just air flow n fuel n exhaust side
What kinda bike is that an orion if so where you get the decals
With any Chinese carbed bike you need to check your towns altitude and rejet the carb
My bike started running rough today,
will not hold a steady idle or rpm even
at about 1/4 + throttle, but accelerates
like a banshi if I get on the gas.
I changed out spark plug,
checked air filter...shrugs...
Whats it mean when the bike is idling high still even after the carb is brand new and you adjusted the fuel screw?
You should re Jett it and I’m not sure if adjusting the air screw would make a difference my bike doing the same thing I just don’t want to take the tank off my bike to get to it (that’s the only way to get to it on my bike) the air screw is the smaller screw next to the idle screw
Over all what’s your favorite dirt bike so far?
Only good kun to put one of Thier fails in as a intro 😅 thumbs up to that
Hey brother did your peace moto make a knocking sound at low idle. I just got one and it is making a knocking sound
Whenever buying a chinese bike, I recommend changing the oil IMMEDIATELY before the first start. The oil they use in the factory over in China where it was "test ran" is basically water. Replace with a good conventional oil for break in, then run either semi synthetic or fully synthetic oil afterwards
Where did you get that exhaust
I'm having problems with my 250cc dirt bike when I give it throttle its struggling to pick up speed and sputtering and when I chanve it into a higher gear it does the same thing I've turned the idle screw for the revs still struggling when let the clutch out can u help me thanks mate
Did you find out what the problem was?
I guess I won’t be doing wheelies with my choke on but thanks for showing how to adjust the carburetor👍
Cover your back brake!
a 4 stroke is hard to wheelie. i used to practice all the time. one time out of the blue i wheelied it across the field...and nobody saw smh. idk how i did it.
Where can I get a Idle screw for the DBX1 Tao Tao
mine bogs when i quickly rev it and when i turn the idle screw in or out the idle jumps and its hard to get it to idle. also when i want to pop a wheelie no power and bogs. Im thinking it would be the pilot screw?
Same here. What was your fix?
Either running rich or lean
Great way to start a vid
What would the best carburetor for 125cc dirt bike
Mikuni VM22 26mm carb on Amazon
I have an Apollo 250 RX. It bogs no matter how I adjust the carb choke on or off. Bought a new carb and still bogs so at this point I don't think its the carb. No that spark plug either unless its something electrical. Any suggestions would be great and thanks!
You solved it ?
FuckThaOpps Yes I did it was the coil wire ground 😂
Ture Kane cause mines keep bogging & I Tried everything
FuckThaOpps So go behind the horn and there’s a cylinder looking black thing with two green wires attached. Make sure the terminals aren’t corroded and it’s on good.
To fix any issue. Take carb apart. Everything. Clean or replace the pilot. Clean the pilot seat. In my case I Terrill it bigger but don’t drill to the ventry. Less chances to get clogged. Then reset the float. Clean the main even if it looks clean. And put it back in. Also use compress air. On the mixture screw take it out and compress air. Mine had shards from factory now it works butifully. Also replaced the screwes with hand twist instead of flat head screw
Thanks bro 😎
Hey im having issued with my bike same as yours but i would like to see how the connections on the hoses are connected because its licking gas tru the air filter
You probably attached youre fuel line to youre overflow just switch them around.
Krispy Cheese everything works normal but its just liking from the bottom hose
Ronny Marte that bottom hose on the carb is the overflow one, it’s designed to let any excess fuel out
Any help my new bike runs fine untill it is warmed up and then it bogges down and dies out ???
My coolster starts bogging then I turn choke up which after a ride starts lagging and bogging alot
I tried a nibbi carb. I have an ssr sr150 it keeps bogging out. But I don't know how to adjust everything else and it's a pian cause I have to take everything off just to change something other than the idle and fuel screw. So I put the stock one back on cause it worked better. It's hard to find a 28mm carb
I have the same bike and the same problem. Did you find a fix too the bogging?
1:24 what do you have behind the airfilter ???
In which position is the choke open or closed on these Chinese carbs ?
How car did you say you put on your bikes?
My guyyyy thanks bro
Standard on carbs starting point tighten mixture screw than blackout 1.5 turns and go from there
Where you get the exhaust
If you by a foam airfilter and it eill be abit faster
What carb would buy for the Apollo 70cc?
A Honda
You should do a muffler swap video
Hey dude is that a 4 stroke or 3
yes pls show how to clean it and adjust it after!
I have a 2016 xmotos 125. I can't find parts anywhere. Does anyone know where I can find part an what is compatible with it?
Nice vid dude
i just got my dirtbike 2 days ago and when i rode it for a bit the exhaust pipe got cherry red is that really bad its cold outside and it was dark i didn't turn on the choke at all and i didn't let it heat up
What kind of bike is it? Is it stock? What are you running for gasoline? Is it fuel injection or carbed?
@@rapscallion3421 carbed and it never happened again it might have been cause I rode it without letting it warm up
Damn u gotta use the break😂
Break
@@alecruiz1328 brake
Done that plent of times lol
What exhaust is this ???
Issue with my friend’s bike is even if I adjust the carb, the idle is all over the place and we can’t figure out why. Any suggestions?
Adjust the mixture screw, I think on chinese carbs it's at the front pointing down
What mm carb is that
What size tires
If you rev up your bike and it takes a bit too idle back down check your float height is not too high .
What does that mean ? Help please I hit the gas and let off and it stay revving high
@@recklesscreator2434Did you ever fix it? Im having the same problem. It just stays at a high rev.
I just break the spokes in the back rim lol
Best intro on youtube 👌
Any one know why my 110 crf Honda drives by itself and when I give full throttle it’s delayed
On idle screw right turn is more gas left is less Gass high idle then turn left low idle turn right
How that tao tao 140 goimg i might get one soon
why is my pitbike shuttering on the 4 gear?
So how to fix it if it bogs?
Wheel size?
I have an orion agb 37 and it revs by itself and stays revved