Excellent video. I’d love to use that tool after too many years of nylon hammer and bashing. Also, I think you did an excellent job of describing each component and the process involved accurately and without umming, erring and mumbling.
@@AlchemyBikeShopis alt/alt solution available yet? Im about to buy some blind pullers and a slide hammer but I would like something like this instead. BSC Tools has those freehub drifts with a chamfered edge to align the sleeve while pressing the bearings in. Its brilliant! Haha
Is the idea to make the extraction process smoother (vs punch or slide hammer) AND to try and preserve the bearing OR is the bearing technically compromised by placing force on the inner ring?
Assuming these won't quite work with bearings that have a sleeve inside that's the same inner diameter as the bearings? I imagine there won't be room for the split collet to sit and expand.
Usually when there's a bearing spacer or sleave in between a pair of bearings it's just a little bit bigger than the inner race. In that situation these tools work well since you can set the C clip to the correct depth and know that you're expanding the collet in the correct spot to get into that small window of room.
I was thinking of buying your new LL Chain Tools: however, $137 freight to Australia is just ridiculous; 3 x the cost of the tool itself. Or are you only wanting to sell to the US? The Connex one costs AUD$20, and $12 to send it from Germany. Who's go the better deal for me?
Cost-wise, yes, this is best left for pros. Even as a home mechanic (formerly a shop mechanic), I'd like a set since I'm obsessed with removing bearings impact-free. I'll embarrassingly admit I don't spend the bare minimum for tools where precision and good mechanical design is key, which means my current tool arsenal is already pretty expensive and it's not even complete yet. (it's configured to work on rim brake road bikes with mechanical groupsets)
really would need to be obsessed with spending money; alls needed is a bearing axel of the same size as the bearing, pop it in and expand the axel bearings and screw out.
For a lot of applications that's an easy way to do it. There are some applications, like having a bearing spacer between a pair of bearings where having an accurate insertion depth is really nice.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
Can’t wait to see this one! When is it gonna be available?
We will start taking orders on 4-17 and shipping by May 1st.
Could you make a video showing correct usage of your bearing presses as well? I'm curious about how they work with suspension linkage bearings.
Excellent video. I’d love to use that tool after too many years of nylon hammer and bashing. Also, I think you did an excellent job of describing each component and the process involved accurately and without umming, erring and mumbling.
How about rear/free hub with an intermediate preload spacer between the two bearings (DT Swiss hubs)? Won't this tool damage the edges of the spacer?
Alt/Alt is about to release a very similar tool that solves this specific problem
@@AlchemyBikeShopis alt/alt solution available yet? Im about to buy some blind pullers and a slide hammer but I would like something like this instead.
BSC Tools has those freehub drifts with a chamfered edge to align the sleeve while pressing the bearings in. Its brilliant! Haha
I’m adding it to my giant shopping list. Awesome stuff as always.
bearing removal tool for square tapper bottom bracket please
Is the idea to make the extraction process smoother (vs punch or slide hammer) AND to try and preserve the bearing OR is the bearing technically compromised by placing force on the inner ring?
Since this method doesn't use a hammer the bearing races should be fine after extraction.
Assuming these won't quite work with bearings that have a sleeve inside that's the same inner diameter as the bearings? I imagine there won't be room for the split collet to sit and expand.
Usually when there's a bearing spacer or sleave in between a pair of bearings it's just a little bit bigger than the inner race. In that situation these tools work well since you can set the C clip to the correct depth and know that you're expanding the collet in the correct spot to get into that small window of room.
What is the model number of the Knipex snap ring pliers used in the video?
Knipex 4911-A1
@@abbeybiketools Thank you
I was thinking of buying your new LL Chain Tools: however, $137 freight to Australia is just ridiculous; 3 x the cost of the tool itself. Or are you only wanting to sell to the US? The Connex one costs AUD$20, and $12 to send it from Germany. Who's go the better deal for me?
Available in Australia from distributors now! your local bike shop can order it in for you. Or we can post it to you, Fat Duck Cycles in Busselton WA.
Leadout Sports are distributor, based in Sydney
Brilliant thank you Abbey.
For the normal home mechanic this tool is way too expensive, but it´s maybe mostly meant for professional use?
Cost-wise, yes, this is best left for pros. Even as a home mechanic (formerly a shop mechanic), I'd like a set since I'm obsessed with removing bearings impact-free.
I'll embarrassingly admit I don't spend the bare minimum for tools where precision and good mechanical design is key, which means my current tool arsenal is already pretty expensive and it's not even complete yet. (it's configured to work on rim brake road bikes with mechanical groupsets)
really would need to be obsessed with spending money; alls needed is a bearing axel of the same size as the bearing, pop it in and expand the axel bearings and screw out.
👍👍👍
Wow, exactly what I was asking for!
Why bother with adjusting the split ring position at all? Just leave it with the max depth. Not understanding.
For a lot of applications that's an easy way to do it. There are some applications, like having a bearing spacer between a pair of bearings where having an accurate insertion depth is really nice.
Looks like noble wheels design
It is, we acquired the Noble catalog.
300 bucks? this tools? 🤨hell no😐
Too complicated and too expensive for what it is...
300£ 😂 Swiss Bones 10£
shut up and take my money