Oi oi Double message I am privileged. I was using Grinder to be honest mate. But if they get a bit iffy then I use them ratchet ones how much for the CK once I must’ve cost a fucking fortune must be in 100+
I have 2 sets of cone cutters from lidl £4 each and I use them on DBs, metal enclosures etc all the time with no problems I find them better than holesaw for anything 32mm and under
Good video this mate, I have a few of the things you have. My cone cutters cost about £8 and have had them about a year, drill metal, plastic and even back of kitchen units for sockets at times, still as sharp as when I got them. Also camera is a life saver. Thanks for the cheap brother tape refills aswell will definitely be ordering some of them 👍🏻
Them tapes are well worth a try mate. I can honestly say that since I’ve bought each printer the only time I’ve ever used an official brother tape was the ones that comes with them. Crazy prices
@@ElectricianTV it's a relief to see that not every spark in the world is picky over tools. I've seen many people say knipex and wera and so on for so long, it's hard as a student to afford the right tools at a decent price when starting out and sometimes just because one looks like a rip off of another doesn't mean its dogshite. Cheers for the heads up on some of the other tools you have shown in this and other videos Will. Can I ask what ferrules you use seeing as you chucked out the crimps that come with the crimper?
Definitely mate you can only get what you can afford there’s no point wasting your money on the stuff that you don’t need if there’s any particular told that use quite often then trade yourself when you can.
Nice one will. Im new to site work and electrical work .What do you think when you go on site to work for a firm . And alot of the sparks on the firm dont have tools with them and you're forever lending tools and they are definitely on a higher day rate ? Any videos of tips for site work ?
It’s a tricky one Harry because I would never lend them tools. There is always people trying to take advantage of good people.There is a reason why they haven’t got their tools.
Not really mate it’s all smoke screens and mirrors I’ve been in the game for 25 years and I do domestic commercial and a lot of testing plus it’s not just me. And Crystal clearly you can see I’m an absolute sucker for tools. Tax Man or tools.
![Quando Rondo - Grow Up [Official Music Video]](http://i.ytimg.com/vi/8zFnCg3BO4Q/mqdefault.jpg)
Hi Will, saw your drill with extra long bits ( hex ends ) where do buy Yours .
Stay safe 👍
Oi Oi
Hi mate are you should get all mine either from Power Tool Mate or Amazon they usually the best prices
@@ElectricianTV Thanks Will . Love your honest presenting . So refreshing. 👍 stay safe
Salad Dodgers. Thanks mate
I’ve got a set of CK ratchet cable cutters! Cost a bomb but had them 10+ years and still work. Never had them sharpened either!
Oi oi Double message I am privileged. I was using Grinder to be honest mate. But if they get a bit iffy then I use them ratchet ones how much for the CK once I must’ve cost a fucking fortune must be in 100+
The POV camera makes the vid alot better, seeing the tools just makes it better for some reason, good vid!
Yeah cheers mate. The more I do of these the easier the editing is becoming
I have 2 sets of cone cutters from lidl £4 each and I use them on DBs, metal enclosures etc all the time with no problems I find them better than holesaw for anything 32mm and under
Cheers mate
Good video this mate, I have a few of the things you have. My cone cutters cost about £8 and have had them about a year, drill metal, plastic and even back of kitchen units for sockets at times, still as sharp as when I got them. Also camera is a life saver.
Thanks for the cheap brother tape refills aswell will definitely be ordering some of them 👍🏻
Them tapes are well worth a try mate. I can honestly say that since I’ve bought each printer the only time I’ve ever used an official brother tape was the ones that comes with them. Crazy prices
Good vid buddy as a newbie your cut prices tips are golden iv bought the ck cable runner the bosch bits and the ck screw driver set 👊👍
No worries thanks a lot Michael. Good luck on your travels of becoming a dropdead gorgeous Electrician
I've got the preciva crimpers... They aren't half bad. Look similar to the knipex model at a fraction of the price..
I’ve not had any issues with them and to be honest I favour them over my SWA version
@@ElectricianTV it's a relief to see that not every spark in the world is picky over tools. I've seen many people say knipex and wera and so on for so long, it's hard as a student to afford the right tools at a decent price when starting out and sometimes just because one looks like a rip off of another doesn't mean its dogshite. Cheers for the heads up on some of the other tools you have shown in this and other videos Will. Can I ask what ferrules you use seeing as you chucked out the crimps that come with the crimper?
Definitely mate you can only get what you can afford there’s no point wasting your money on the stuff that you don’t need if there’s any particular told that use quite often then trade yourself when you can.
Nice one will. Im new to site work and electrical work .What do you think when you go on site to work for a firm . And alot of the sparks on the firm dont have tools with them and you're forever lending tools and they are definitely on a higher day rate ? Any videos of tips for site work ?
It’s a tricky one Harry because I would never lend them tools. There is always people trying to take advantage of good people.There is a reason why they haven’t got their tools.
I’ve bought another £100.00 of tools and I’ve only watch 2 of your videos ffs! Lol!
Can’t wait to tell the Mrs!
Oi oi Sorry about that mate. 😂😂
Labeling love it - top man that awesome it makes life so much easier for you and any other electrician who comes around.
Absolutely mate why wouldn’t you do it. Plus also very helpful for the customer.
You have got a serious amount of gear/tools 😂 Do like the look of them CK bags
Not really mate it’s all smoke screens and mirrors I’ve been in the game for 25 years and I do domestic commercial and a lot of testing plus it’s not just me. And Crystal clearly you can see I’m an absolute sucker for tools. Tax Man or tools.
Niceeeee!
Thank you Sweet cheeks