YOU USE THE SMALLER DRILL BIT FOR THE FRONT HOLES OF LOCKING BLOCK! Just look at the pin in the front of your frame with the HL1, it's the same size as the rear grip pin so you'd use same drill bit...... you need to use finished frame in jig to drill holes into jig from inside out.
Honestly with a jig. And a plastic block and or even without the jig. I’m pretty sure I could machine this with a micrometer. Like carve a lower completely out
If you can do a update im trying to get back into these after everything died down again and man the og frames were way better i can see a big difference they added a bunch of plastic but nothin precise building nd patience cant take care of
Yes, it's called throw it in the garbage, will never come out right and the bridge removal weakens the frame itself and will shatter on the recoil of the slide!
Mannnnn, I'm trying to learn up on these before i dive into trying to complete the new model frames I just ordered and I just keep getting angrier and angrier lmfao. looks totally doable but I just know I'm going to completely fuck up at least one of them. How difficult was it to mill out the locking block section and trigger group? Did you ever end up finding a solution for getting that front pin drilled as well? Any advice or info would be greatly appreciated. ATF really needs to calm tf down.
Again...thanx for the reply...im not good with technology but i got an email from you. This is my first build and im currently in NJ where they have this state on lockdown. Im originally from Philly and the administration there has the city locked down with the mail crap so its difficult for me to get frames. Also...i have a jig coming in the mail and with the 76% it doesn't have that front pin but i have a thought...i was wondering if i can bounce it off of you for your thoughts. If you choose, respond at your earliest convenience.
i bought a PF940Cv1 and i cant find any rails for it except for rook tacticals but i cant find any reviews or how they fit or even if they fit and whats the difference between PF940Cv1 and PF940C my first build btw any suggestions
I would say find the rails that are silver and not black cuz the silver are the upgraded ones and match the rail set to your frame name some sites sell them separate and together so you jus got to look but there out there but the two models are based on 2 diffent Glock frames I know the 40 is based on Glock 40 and g40c is the compact one
@@practicalcivilian3259 and so is there any actual difference between the pf940c and the pf940cv1 because it says there both Glock 19 frames just tryna find the difference between both if there is any
@@practicalcivilian3259 well I looked around and apparently they are both the same thing ig we will see because I bought a pf940cv1 bridge frame and a pf940c jig
Thanx for the reply, my name is Brian, I don't know why it's coming up as...user-ts2q...but my question was if your frame came with the correct rails? I believe you bought the frame from the same company as I did but the rails that came with mine were for the pf940cv2, which are longer than the rails for the pf940c, so I had to spend an additional $65.00 for the correct rails because P80 don't have any for pf940c, which is the frame I own.
@@Bgr8full83 I believe eBay sells the right rails for like 30 bucks I have found them on a few web sites but they should have corrected your problem for free
YOU USE THE SMALLER DRILL BIT FOR THE FRONT HOLES OF LOCKING BLOCK! Just look at the pin in the front of your frame with the HL1, it's the same size as the rear grip pin so you'd use same drill bit...... you need to use finished frame in jig to drill holes into jig from inside out.
could u make a close up video on what new plastic pieces to cut out? if you cant do that on youtube could u contact me in someway? thank you
I ca make a video but there are a lot of them on RUclips
@@practicalcivilian3259I haven’t seen any on the 76% frames I’ve been looking all day. I think they all get taken down
@@anthny8276 look up p80 video they did about it at shot show last year
Honestly with a jig. And a plastic block and or even without the jig. I’m pretty sure I could machine this with a micrometer.
Like carve a lower completely out
Can somebody please tell me where to buy the frame or send me a link?
@@Parsa8237 just search p80 frame
bro im tryna find a pf45 so bad
@@grxviity1988 me too
Lmk what you need
@@Jgetthemoney a P80
If you can do a update im trying to get back into these after everything died down again and man the og frames were way better i can see a big difference they added a bunch of plastic but nothin precise building nd patience cant take care of
I can do that
You can 3d print jigs that work with these.
I didn’t know that … thanks for the tip
Where can I find them?
So how did this turn out?
@@Evolutional it’s running fine I’m still waiting on my red dot but really nothing to report fr
Any tips on removing the area in locking block and bridge?
A hot cutting knife helps and or small drimmel bits paired with some type of saw tip
Thank you, sir.
Yes, it's called throw it in the garbage, will never come out right and the bridge removal weakens the frame itself and will shatter on the recoil of the slide!
@@druanubis7194 mine came out fine and it’s working okay you just have to know wha your doing
@@druanubis7194that’s why u clip it part by part and then grind or sand it down
Mannnnn, I'm trying to learn up on these before i dive into trying to complete the new model frames I just ordered and I just keep getting angrier and angrier lmfao. looks totally doable but I just know I'm going to completely fuck up at least one of them. How difficult was it to mill out the locking block section and trigger group? Did you ever end up finding a solution for getting that front pin drilled as well? Any advice or info would be greatly appreciated. ATF really needs to calm tf down.
If I get a frame will they ship it to my door
@@Runtzo yes the 76% do ship to your door
It wasn’t that hard you just have to have the right tools and take your time and go slow
@@practicalcivilian3259site for the frames ? I alr got the slide I just need the frame
@@practicalcivilian3259what tools do I need to use
Again...thanx for the reply...im not good with technology but i got an email from you. This is my first build and im currently in NJ where they have this state on lockdown. Im originally from Philly and the administration there has the city locked down with the mail crap so its difficult for me to get frames. Also...i have a jig coming in the mail and with the 76% it doesn't have that front pin but i have a thought...i was wondering if i can bounce it off of you for your thoughts. If you choose, respond at your earliest convenience.
I had to drill mine by using the rails as a guide and using another frame I already did as a reference
Aye I like ur character Man U got a good voice keep going
Thanks man much appreciated
What pound guide rod do you have on the comp mine keep jamming
It’s lighter than the OEM so I believe it’s a 16 pound or 15 pound .If I was you I would buy a few different ones and see what works 👍🏽
@@practicalcivilian3259 what threaded barrel do you have
@@kombatboiiii5747 I don’t even remember but I know I mentioned it in a video before
i bought a PF940Cv1 and i cant find any rails for it except for rook tacticals but i cant find any reviews or how they fit or even if they fit and whats the difference between PF940Cv1 and PF940C my first build btw any suggestions
I would say find the rails that are silver and not black cuz the silver are the upgraded ones and match the rail set to your frame name some sites sell them separate and together so you jus got to look but there out there but the two models are based on 2 diffent Glock frames I know the 40 is based on Glock 40 and g40c is the compact one
@@practicalcivilian3259 they do have stainless steel
@@practicalcivilian3259 and so is there any actual difference between the pf940c and the pf940cv1 because it says there both Glock 19 frames just tryna find the difference between both if there is any
@@project_AK47 I believe the rails are the same but tha would be a good question for the website customer service before your purchase them !!
@@practicalcivilian3259 well I looked around and apparently they are both the same thing ig we will see because I bought a pf940cv1 bridge frame and a pf940c jig
What website did you buy it from?
Mas defense
What do I need to clear out for the trigger housing
Depends on which frame you have
@@practicalcivilian3259 p80 19 frame
Where can I order one ?
@@danielnila6102 depends on what size and color that you want
Full size black Glock 17
Or whichever ones are available
where can I order a frame?
Lol the internet
anyone got a p80 G26 for sale hmu
Yo
Practical Civilian....did your pf940c 76% have the locking block for the pf940cV2 when you opened the box? Mine did and i had to buy a new rail kit.
Yea it had the locking blocks
Thanx for the reply, my name is Brian, I don't know why it's coming up as...user-ts2q...but my question was if your frame came with the correct rails? I believe you bought the frame from the same company as I did but the rails that came with mine were for the pf940cv2, which are longer than the rails for the pf940c, so I had to spend an additional $65.00 for the correct rails because P80 don't have any for pf940c, which is the frame I own.
@@Bgr8full83 I believe eBay sells the right rails for like 30 bucks I have found them on a few web sites but they should have corrected your problem for free
What red dot is that
Holosun 508t
Dhd hardware has the jig for the other hole just fyi
did you get it done?
I did but waiting on my slide parts and other stuff to come in
Can I get some places to buy a frame from I don’t wanna spend $300 on one frame no jig😂
This frame version is crap, don't buy it!
Why lmao
I’ve seen some pretty clean builds off these ones all things considered
What’s ya email ?
@@maliksmith7166 ctactiction1995@gmail.com