Jet with No Carbon Spars! - Ultimate 3D Printed Jet - Eclipson Inferno

Поделиться
HTML-код
  • Опубликовано: 15 янв 2025

Комментарии • 88

  • @toosas
    @toosas 2 месяца назад +28

    wow not seen an interlaced video in a while and defo did not expect to see it on this channel!

    • @RCGuyVideos
      @RCGuyVideos 2 месяца назад +1

      Some are still pining for the olden days of video!

    • @Caroline_Tyler
      @Caroline_Tyler 2 месяца назад

      Yes, My immediate impression, the joy of interlaced video.

    • @Gemitaur
      @Gemitaur 2 месяца назад

      I would love to get your x1c aero pla settings

    • @Baatory
      @Baatory 2 месяца назад +1

      This is just a general channel comment:
      You guys are great being so normal and completely nuts at the same time. Keep it up :) I like your content but I can bet money that if you'd make a video about shoe polishing it would still be fun somehow😂

  • @ErtsenPlayGames
    @ErtsenPlayGames 2 месяца назад +9

    video quality nostalgia 😎
    bring back memories

    • @FliteTest
      @FliteTest  2 месяца назад

      Glad you enjoyed it

    • @bluckfox
      @bluckfox Месяц назад

      @@FliteTestcrop

  • @Caroline_Tyler
    @Caroline_Tyler 2 месяца назад +6

    I'm loving the Colorfab LW-PLA-HT filament - far less issues with sag under stronger sunlight.

  • @RCGuyVideos
    @RCGuyVideos 2 месяца назад +3

    I love the look of that airframe, so sleek and sharp. But at 4:52, with that full throttle fly by, it screams like a rear propeller Multiplex Funjet! I've never heard an EDF that loud before.

    • @FliteTest
      @FliteTest  2 месяца назад

      It is a super slick airplane and extremely slick

    • @pavlosconstantinou9236
      @pavlosconstantinou9236 2 месяца назад

      @@FliteTest what he meant .. you need a more whooshy EDF unit... not that screamer :)

  • @CalebT_RC
    @CalebT_RC 2 месяца назад +2

    The red paint gives it a good shine, I love it.

    • @FliteTest
      @FliteTest  2 месяца назад

      Yes it looked amazing going through the air!!!

  • @rc.remedy
    @rc.remedy 2 месяца назад +1

    Beautiful, sleek lines.. an Eclipson plane is definitely on the to-do list!

  • @wallacegrooms7791
    @wallacegrooms7791 2 месяца назад +1

    Shout out to the drone pilot on this episode. Death defying moves chasing that jet. Well done!

    • @FliteTest
      @FliteTest  2 месяца назад +1

      Mike defiantly does a great job

    • @M-HK-
      @M-HK- 2 месяца назад +1

      I think a person is born with that ability. I wasn't born with it for sure.

  • @morkshanmedia3998
    @morkshanmedia3998 2 месяца назад

    I’ve been watching these collabs for a while and I’m definitely gonna get this one that size is so convenient.

    • @FliteTest
      @FliteTest  2 месяца назад +1

      It flies so good we would defiantly recommend

  • @CrashTestRC1
    @CrashTestRC1 2 месяца назад +1

    That is awesome! I would love to see You guys revisit the laser tag dogfights with those aircraft. Maybe Try to make it as repeatable as possible so we can get A bunch of these out to Flite Fest for a different style of combat.

  • @RobFeldkamp
    @RobFeldkamp 2 месяца назад

    More power, more energy, more passion, more footwork!

  • @bartlester591
    @bartlester591 2 месяца назад +3

    There was three planes from a animated show called battle of the planets. When I grew up if you don’t remember it, I’m not shocked, but one of them was called the Phoenix., the other one was one of the groups vehicles which was an actual jet, which was blue and white, and the other one belong to a group called red impulse

    • @ferrumignis
      @ferrumignis 2 месяца назад +1

      I regularly watched the G-Force team defeating Spectre after school! There were some awesome animations for kids back then, I really dislike the 3D rendered stuff they make these days.

    • @bartlester591
      @bartlester591 2 месяца назад +1

      @ I was wondering if y’all had ever thought about making planes inspired by g force

    • @ferrumignis
      @ferrumignis 2 месяца назад

      @bartlester591 I've seen RC planes catch on fire, perhaps trying to emulate the Phoenix 😂

    • @bartlester591
      @bartlester591 2 месяца назад

      @ not exactly what I had in mind

  • @jasonnorrie4344
    @jasonnorrie4344 2 месяца назад +2

    I want to see a Thunderbird 2 version with droppable body!

  • @Robert-ni6ut
    @Robert-ni6ut 2 месяца назад

    Once again another great plain from eclipsen 👍

    • @FliteTest
      @FliteTest  2 месяца назад +1

      Glad you think so!

  • @kkuenzel56
    @kkuenzel56 2 месяца назад +3

    Hey guys! How about a video on your printing techniques with LW PLA? A lot of us have the Bambu Labs X1 Carbon. Or you could share your slicer settings.

    • @ferrumignis
      @ferrumignis 2 месяца назад +2

      I second this, it would be really useful.

    • @FliteTest
      @FliteTest  2 месяца назад +1

      We will have to do this in the next Eclipson Episode. What would you like to know

    • @kkuenzel56
      @kkuenzel56 2 месяца назад +1

      @FliteTest I've never printed with LW PLA. I've heard it's a little tricky to get right. I'm interested in printing an airplane some day and I have a Bambu Labs X1-C.
      I would love to have you guys go over slicer settings and any words of advice for a beginner.
      This would be a great Flitetest Tech video!

    • @ferrumignis
      @ferrumignis 2 месяца назад

      @@FliteTest Any slicer settings that you've optimised e.g. temperatures, cooling, layer heights etc. Do you do anything special for overhangs e.g. water soluble filament? What's the layer adhesion like with the lightweight PLA?

  • @wonderwommy
    @wonderwommy 2 месяца назад

    Great video, Please make a Craycle plane as well. I also love their unique FPV models 🥸

    • @FliteTest
      @FliteTest  2 месяца назад

      Great suggestion!

  • @MarcDunivan
    @MarcDunivan Месяц назад

    More videos like this. Please!
    This doesn't have retractable landing gear?

  • @ido8928
    @ido8928 Месяц назад +1

    Wow pilot drone👍.sungguh rc pesawat mengagumkan..MANTAP TAMPILAN JUGA KECEPATAN .salam terbang indonwsia

  • @FLITETEST_SUPER_FAN
    @FLITETEST_SUPER_FAN 2 месяца назад

    Love it guys!❤❤

    • @FliteTest
      @FliteTest  2 месяца назад

      Thank you so much!!!

  • @danielskoog5565
    @danielskoog5565 2 месяца назад

    Have you tried LW ASA? It should be much more temp resistant, and stronger that PLA.

  • @fati3m574
    @fati3m574 2 месяца назад

    Nice, I want more 3d printed models

    • @FliteTest
      @FliteTest  2 месяца назад

      Ok coming soon. Eclipson is working on a passion project for us that we can't wait to show you!!!

  • @jacobingram147
    @jacobingram147 2 месяца назад

    Been watching this channel since i was like 5 or 6

  • @jamesalbrecht395
    @jamesalbrecht395 2 месяца назад

    What a great plane. It seems you guys have fully embraced the EDFs! Just a question, it seems that eclipson is not designing in flaps to their models, are there any mods that modelers can do to add them? Being these planes require fast landing speeds maybe adding flaps can give them better landing characteristics??

  • @SaberShorts
    @SaberShorts 2 месяца назад

    Have you guys ever tried LW-ASA? It looks stronger than pla and handles more heat.

  • @Mobile_Dom
    @Mobile_Dom 2 месяца назад +2

    is... is this 1080i?

  • @centauri9458
    @centauri9458 2 месяца назад

    Bet that one would be great as a float plane.

    • @FliteTest
      @FliteTest  2 месяца назад

      That might be something to test

  • @surfhealthy4272
    @surfhealthy4272 2 месяца назад +1

    360p vid.....Taking me back in time :)

  • @FTDrift
    @FTDrift 7 дней назад

    What receiver was used to connect to the tx16s?

  • @WindCatcherRC
    @WindCatcherRC 2 месяца назад

    Wow! that is one slick looking plane. But no carbon fiber? 😥 We need more planes that require carbon fiber. haha!
    Be aware that if you are painting and the applying vinyl, your vinyl is now sticking to paint, not plastic.

  • @AdejareOrenaiya-r2c
    @AdejareOrenaiya-r2c 2 месяца назад +1

    Please make a airplane from a old drone

  • @CMDR.OCurtis
    @CMDR.OCurtis 2 месяца назад

    I really want to see you guys design elite dangerous space ships print and fly them plz plz plz

  • @kellyharbour7140
    @kellyharbour7140 2 месяца назад

    Who flies the drone and how in the world does the drone cam stay on the jet?

    • @FliteTest
      @FliteTest  2 месяца назад +1

      Mike does our drone footage. He is defiantly a great pilot

  • @Original_User1
    @Original_User1 Месяц назад

    Hey FT guys! I have been working on you F 14 recently and I noticed you guys didn’t have and master series jets. I completely understand if you deny me, however I think it might be worth it for you guys to make an F-111 kit. In many f 14 videos people were commenting on the f14 swing wing mechanism in an f-111. I personally understand if it is too complicated but possibly you guys could put the same swing wing in an f-111 body. Personally the f-111 is my favorite bomber and I would love to build one. Again I completely understand if it is too challenging however I merely hope you guys think about because it is like a dream come true for me

    • @ohiorc5586
      @ohiorc5586 Месяц назад

      John overstreet is who designs the master series planes so it would have to be him

    • @Original_User1
      @Original_User1 Месяц назад

      @ oh

  • @ac9356
    @ac9356 2 месяца назад

    I always thought u need flex in the wings ad all planes wings flex quite a bit

  • @bkk6211
    @bkk6211 2 месяца назад

    Can you tell me what printer and filament you are using?

    • @ferrumignis
      @ferrumignis 2 месяца назад

      They show in the video, Colorfab Lightweight PLA on a Bambu X1C.

  • @calebrosenhauch4296
    @calebrosenhauch4296 2 месяца назад

    Can you guys please share the slicing presets for this? I can’t get vase mode to work on my bambu

    • @FliteTest
      @FliteTest  2 месяца назад +1

      In the next Eclipson Video we will go ever more 3D printing settings and tips and tricks

    • @calebrosenhauch4296
      @calebrosenhauch4296 2 месяца назад

      @ awesome! Thanks guys

  • @SwordFighterPKN
    @SwordFighterPKN 2 месяца назад

    I used to have a rocket glider that was shaped like this plane.

  • @rcplanesjohnreap2777
    @rcplanesjohnreap2777 2 месяца назад

    needs reverse thrust.. a great model..

    • @FliteTest
      @FliteTest  2 месяца назад

      That would be so fun ... Airbrakes!!!

  • @kalpgarg
    @kalpgarg 2 месяца назад

    Are there any good detailed 3d plane plans for free ?

    • @air-headedaviator1805
      @air-headedaviator1805 2 месяца назад

      You could check a place like Thingyverse and see if anyone has posted free plane designs

  • @jyrrys
    @jyrrys 2 месяца назад

    Nice video. I just don't know why it's called INFERNO when the designer did everything to keep it from flying too fast.
    The double tails, the 4 corners between the rudders and the elevator, the undercarriage "pants"... all this increases aerodynamic drag.

  • @Bonamici
    @Bonamici 2 месяца назад

    💙💛

  • @nikchi
    @nikchi 2 месяца назад +1

    what happened to the video

  • @1.5acrefarmer42
    @1.5acrefarmer42 Месяц назад

    Look at all the chemtrails in the sky 🤦🏻‍♂️

  • @nstar7877
    @nstar7877 Месяц назад

    i thought calling it a jet means jet engine

    • @Kid_with_propeller
      @Kid_with_propeller 29 дней назад +1

      In rc, planes with a jet engine are called a "turbine"

    • @nstar7877
      @nstar7877 29 дней назад

      @Jagers_propeller ok thanks

  • @didierneeferc
    @didierneeferc 2 месяца назад

    No Carbon Spares? 👀🫣😅🤣

  • @toolbaggers
    @toolbaggers 2 месяца назад

    lol not printing in red

    • @FliteTest
      @FliteTest  2 месяца назад

      Ya ... We thought about that right as we went out to fly 😂

  • @unclebobby673
    @unclebobby673 2 месяца назад

    You should switch to ASA aero filament for planes, you'll be able to keep them out in the sun all day

    • @ferrumignis
      @ferrumignis 2 месяца назад

      Would be interesting to compare the same model printed in LW PLA and the ASA Aero. The ASA seems to be very prone to stringing, so probably more post processing needed.

  • @ac9356
    @ac9356 2 месяца назад

    You do know that red fades the quickest in the sun

    • @ferrumignis
      @ferrumignis 2 месяца назад

      What's your point, never paint anything red?

  • @Isaiahvak
    @Isaiahvak 2 месяца назад

    I am your #229 viewer!

  • @shanethepain2009
    @shanethepain2009 2 месяца назад

    low rider edf , not one i will print just because of the low clearance, what was the point