I would have said that this stunt was pretty risky and even dangerous but then I noticed that the operator was wearing a reflective jacket, so... Cary on sirs! Cary on.
For anyone that is a real operator this is just part of the job. And for anyone scratching their head I can scratch your head with that machine as well
Risk vs. reward does not justify doing this every time you need to transport the machine. A trailer to haul a mini that size isn’t that much money compared to parts and downtime of one mess up with the acrobatic loading some this way.
Es mucho mejor la cuchilla abajo que a delante y al dar la vuelta al contrario y asi si volcase el operador esta mas seguro pero an tener la cuchilla apoyada al suelo no hay riesgo de vuelco
pretty much standard practice, I just don't know why he doesn't climb into the back rather than the side. I always have, since first digger in 1990. I do use a trailer now, but its a 12 tonne tipper trailer and I still have to climb in.
Bez té otočky si to takhle může sám člověk neložit i zezadu a vůbec nic nehrotit ne? Připadá mi to dost easy způsob ze všech co jsem viděl, a Vám to jde ;)
What are the capabilities of this machine, as far as taking out tree's, clearing land, digging footers and septic system? Have some tree's in the 2 foot range.
i've been watching a guy clear a lot here for the past week -- he's taken out trees of that size and moved about 300 yards of stone infested hard packed dirt .. its why i'm looking at this.
I may be late but here’s the specs. www.kubotausa.com/docs/default-source/spec-sheets/u-spec.pdf?sfvrsn=eb4236fd_2 I do construction for my dad and use a U55-4,KX57-4 and a U27-4 and they are all fantastic!
Great job, however he almost killed himself never mine the guy that thought he could hold up a 10k pound excavator. Hope there is insurance on the excavator because this guy is going to eventually destroy it.
Super hard on that equipment! Sure they'll be investing in a new truck or machine at that point very soon. And it's pure laziness! You could've had that machine loaded already if you just brought out the ramps! SMH. And the dude trying to hold the machine up! How dumb are you? Have some common sense!
I would have said that this stunt was pretty risky and even dangerous but then I noticed that the operator was wearing a reflective jacket, so... Cary on sirs! Cary on.
😂😂😂😂 yeaaa that jacket helps a lot!
naopak páni, predkom hore a podperou sa podvihnúť a dotlačiť už len lyžicou
ja som ukazal ze aj tak sa da nalozit aj z boku to co spominas je jednodkusie :-)
For anyone that is a real operator this is just part of the job. And for anyone scratching their head I can scratch your head with that machine as well
Risk vs. reward does not justify doing this every time you need to transport the machine. A trailer to haul a mini that size isn’t that much money compared to parts and downtime of one mess up with the acrobatic loading some this way.
pretty much NO risk when you know what your doing.
Don't worry, it's a rental!
Perfekt na poprve , taky bych byl dosranej ale dals to na jednicku
Es mucho mejor la cuchilla abajo que a delante y al dar la vuelta al contrario y asi si volcase el operador esta mas seguro pero an tener la cuchilla apoyada al suelo no hay riesgo de vuelco
Mantap mas bro😄
So how much of an angle will the engine stop sucking up enough oil to keep it from self destructing?
vertical, or on its side, but not upside down.
Very skilled! Wow!
So was this showing off or couldn’t they afford ramps?
OSHA going to love that LOL!
pretty much standard practice, I just don't know why he doesn't climb into the back rather than the side. I always have, since first digger in 1990. I do use a trailer now, but its a 12 tonne tipper trailer and I still have to climb in.
Bez té otočky si to takhle může sám člověk neložit i zezadu a vůbec nic nehrotit ne? Připadá mi to dost easy způsob ze všech co jsem viděl, a Vám to jde ;)
Did that guy standing outside really just try to hold up the machine with his hands. Smh.
It’s more to feel when the machine is going to roll.
Every little bit helps 😂
Nice brother, made me $#!+ my diggers when you turned around at first.
Dakujem som rad že sa paci
Cat 320 EL pasák na predaj, 2013, 9800h, vynikajúcí stav .
je na predaj?
@@ing.matuskubasko4758 uz sme ho predali, máme este 4 kolesové bagre.
What are the capabilities of this machine, as far as taking out tree's, clearing land, digging footers and septic system? Have some tree's in the 2 foot range.
i've been watching a guy clear a lot here for the past week -- he's taken out trees of that size and moved about 300 yards of stone infested hard packed dirt .. its why i'm looking at this.
I may be late but here’s the specs.
www.kubotausa.com/docs/default-source/spec-sheets/u-spec.pdf?sfvrsn=eb4236fd_2
I do construction for my dad and use a U55-4,KX57-4 and a U27-4 and they are all fantastic!
Rozpierdalanie sprzetu jednego i drugiego,tylko tyle,żaden szpan i umiejetności
After load up of excavator….Operator- “Ho cuzin…You no mo sheegret?”
I don’t know who’s dumber the operator or the guy standing outside that thought he was going to hold the machine up.
Vorrei Sapere va bene per i pistoni idraulici Pistola ad ingrassaggio?
its smarter to close the door
Super cool 😎
Drachenschild 😀
why so many dislikes? that was an impressive loading stunt. Not every operator can do it.
Thanks for your goog coment.its true
We can all do stuff like this but let's be fair it's so Dangerous one mistake a broken back and broken digger 🤷♂️
fantastic
Skroz pogresno buraz
Like that guy can hold 12000lbs or more with one hand...could of been all over that guy
To je vyborne!
Nebylo by lepší radličku dole?
V praxi je lepšie radlickou dole a zozadu ale pre natáčanie a sledovanosť to robím opačne 😊
@@marekkosc já dělám taky s bagrem proto mě to zarazilo😀 ale dal si to😀
Show amigo....Like 👍 inscrição!!!
The way to get on top of the truck is wrong, you have to change the direction of the front to the back✔️
it's done that way on purpose
@@marekkosc I wish you success in your business💪🏻🙏🏼✔️
@@T55-n1h thank you
А с заднего борта заехать слабо было?
Думаю проще открить второй борт, разворот на месте и все дела, если сзади никак...
Neni to video o tom ako sa ma nakladat ale je to moznost ze aj takto sa nalozit
rookie driver. blade should never go in front prior climbing something..
But when the blade is in the back, someone has to drive the truck in front. And that will be difficult if you drive on it from the side.
Warum.macht der die hintere Boardwand nicht auf ???
Der zeigt nur , wie aus neben seite aufladen
jednak niemcy sa jacys ograniczeni czekam na nowe pokolene bo moje juz rosnie :)
This video should be called: How to fuck your wagon up and risk tipping over an expensive machine! Oh and churn up the car park while you're at it! 🙄
한국 사람들이 미니 굴삭기 잘하는거군
Видно в первый раз, не знает как дальше быть.
Это не спец а тормоз. Мой рекорд минута и борта эксом закрывал за собой.
Von hinten wäre einfacher gewesen😂😂
Great job, however he almost killed himself never mine the guy that thought he could hold up a 10k pound excavator. Hope there is insurance on the excavator because this guy is going to eventually destroy it.
He should use the back door🤦🏻♂️
Naopako se natovara odvali stranicu noz pozadi ide
Never pass DOT transport requirements...
You might not belive it but there are other countries besides the us
it can be loaded in a much better and easier way
Aluminum loading ramps
Buy a trailer...
Or just invest in some alloy ramps 🤙🤔
@@martyma3244 naw too expensive for the boss. The boss rather fuck the truck up than spend a few hundred
😀
Fun…until you throw a track, it tips over, or the bucket slips. Not to mention it’s a pain in the derrière.
Brah buy a ramp
Yeh Man
Zajebiste🤣
Good
go buy some ramps
Purely a novice that has no clue what he is doing or the capabilities oif his machine. He is dangerous.
strojaru bi bilo pametnije da zatvori ta vrata
Co to kurwa za operator pierwszy raz wsiadł do tej koparki czy co muli jak gnój na roli...haha
Respekt, Respecto
Buy a low loader ffs
Lebensmüde Typen.
Omaigod
top
just buy a 3k trailer, dang!!!
Or £300 ramps . Get a welder to make heavy duty , lift them about into position with the digger .
CRAZY
Get a trailer!
Look like an out take from …Dumb and Dumber……..
全錯
This is so stupid. Get a trailer. Even professionals can have accidents.
Besok aku anterin exsafator kecil ya
Такое икмватор сиколка истоет
Buy a damn trailer !!
my eyes are bleeding
I bet he's overweight on the steers
😀🤣🤣🤣🤣
Super hard on that equipment! Sure they'll be investing in a new truck or machine at that point very soon. And it's pure laziness! You could've had that machine loaded already if you just brought out the ramps! SMH. And the dude trying to hold the machine up! How dumb are you? Have some common sense!
Cieniutko moja babcia szybciej się ładuje
😂😂😂
:)
Get a different job!!
G . N
get a firkin trailer Jesus.
굴삭기, 차에 싣는데 뭣이그리 빌빌대누 그러다 현장에 언제가고 퇴근은 언제하누 ᆢ코쟁이들아, 한국기사들이 보기엔 애처롭다!
Harakiri
.
V
Just buy a trailer.....lol
딱하다 딱해 ㅉㅉㅉ
下手すぎやろ。
idjota
If it works it's not stupid
Devin Haisma it's stupid no matter how you look at it.
بييييييييييييييييييييططططططططططط
Que loquera, así no es que se ase.
Trapnej amatérismus , Radlickou obráceně a sundat druhou sajtnu