The most beautiful "How to" video i have ever seen. The whole video is clear, bright and with the proper angles that enables us to see clearly the work on the parts. Narration is excellent, little subtle tips given too. Just too good
Put mine on today. This is one of the best instructional videos ever. Took me about 35 minutes all told. My Duke looks even sexier now. I had a GREAT experience with Mustard Bikes. Wish they made more parts, honestly.
Just received mine in the mail today cant wait to get it on, just curious, the coloured cables, grey to grey, green to green, then the red is different connection? Take the red off the old?
Hi Simon, Indeed, the red plug from the OEM fender needs to be fitted to the LED bolt. There is a link to another video on how to do this in the Vid description. Hope that helps!
@@lukejamesquinn that shouldn't affect the indicators flash rate though and is normal procedure for fitment. Have you checked all the indicators are working? How much faster is it flashing? If you are using the oem indicators nothing should have changed.
@@MustardBikes all good mate. Figured it out. Feel stupid 😂. Obviously the flash rate it different when engine is running hahaha 🤣 sorry for the hassle. Good product !
When you disconnect the indicators do they have to go back on the same side it come off or does that not matter as long as you connect the right colour together
Hi there. Preference is to put the same side back on the side it came. Always check your indicators after installation and make sure the right indicator lights up when switching right.
Hi Andries, the 186mm is reference to the spacing between the indicator lenses. IE the maximum size plate you can fit before obstructing the lens (the portion that lights up) of the indicator. If you fit a wider plate you will start to obstruct the visibility of the indicators. Hope that helps!
Está incluido con el producto, sin embargo, deberá conectar el enchufe original como se menciona en el video. Puede encontrar un vídeo separado sobre cómo hacer esto en nuestras listas de reproducción. ¡Espero que ayude!
Hi. I'm from finland and my licence plate is 165mm wide. Will the 186mm option be the right one for me? Also, will this fit to my duke 125cc 2018 model?
Hi there, the 186mm option would be the closest one to your plate. As far as we are aware this will fit the 125cc model (we don't have the 125cc version here so can't verify).
@@Rockmade for Canada you'll want the 186mm version of our product. The indicator mounts for the OEM indicators are the same for both countries. It's just the actual indicator lens portion that differs. Hope that helps!
@Mustard Bikes I'm looking at aftermarket signals so will this work or is the thread different than the oem one, thanks for the reply I'm looking forward to buying
Hi Glenn, thank you for the feedback! Under Australian ADR laws the rear guard has to meet some design rules, mostly a maximum of 45 degree's upward angle, and some visibility rules. We design our products using these rules as guidelines, however ultimately it is the responsibility of the installer/owner to make sure they comply. So ultimately yes they should be compliant if installed correctly, however for legal reasons we do not claim or promote them as ADR approved.
Hi Dimitry, we have heard of a customer fitting it, however it does not have the holes to mount the OEM light as it comes with one of ours pre-fitted. From memory the customer had to add two small holes to make the OEM light fit.
Hi there, No mount versions are made to order. Simply order via the website, we'll send an email to confirm you want it and then we'll make it. Turn around is typically 2-3 weeks to shipping. The other options we always have in stock. Hope that helps!
@@MustardBikes i’m sorry, what i was asking is which option should i choose. I don’t understand what no mount means. Thank you for answering. Anyways, i ordered the first option. But if you could explain what that means id be thankful. Also, do you think it fits a duke 200? 2020
@@mag4208 Ah...the no mount option is for use with an integrated tail light. It has no indicator mounts on it. As for the 200, yes this should fit the 200 Duke.
EXCELLENT VIDEO, EXCEPT YA'LL MIGHT CONSIDER SHOWING THAT EVERYTHING WORKS AFTER INSTALLATION. I'M IN THE U S A. ALMOST ALL STATES HAVE THE SAME REQUIREMENTS AS MINE ( STATE OF VIRGINIA ) WHICH IS STATED BELOW STRAIGHT FROM THEIR OFFICIAL WEBSITE ; Signal lamps installed on the rear of the motorcycle shall be red or amber and shall be located on each side of the !!!! vertical centerline of the motorcycle !!!!! as far apart as practicable !!!!!! but not closer than nine inches, measured from the optical centerline of the lens, !!!!!!! and shall be located on the same level and not less than 20 inches above the ground level. IF YOU CAN ASSURE ME THAT THE SIGNAL LIGHTS WILL CONFORM TO THE REQUIREMENTS OF VA., (ESPECIALLY WHAT IS BETWEEN EXCLAMATION MARKS) !!! AND THAT THE 4 INCH X 7 INCH (10.16 CM X 17.78 CM ) VA. MOTORCYCLE LICENSE PLATE !!! WILL NOT OBSTRUCT !!!! THE TURN LAMPS, THEN I WILL GET YOUR PRODUCT. I BELIEVE MOST IF NOT ALL U. S. MOTORCYCLE LICENSE PLATES ARE IDENTICAL SIZE. THIS SUBJECT IS INTENSELY DISCUSSED ON A NUMBER OF FORUMS WITH U. S. RIDERS AND UNFORTUNATELY RESTRICTS US TO VERY FEW CHOICES FOR TAIL TIDIES ON MANY BIKES. I KNOW FROM EXPERIENCE THAT THE KAWASAKI VULCAN S HAS THIS PROBLEM (AS OF LAST SUMMER ANYWAY) AND THERE IS REALLY NO REASON FOR IT WHEN A SIMPLE SOLUTION COULD RESOLVE THIS PROBLEM AND ?? SHOULD NOT BE COST PROHIBITIVE ?? FOR YOU ( OR THE CUSTOMER) , TO DEVELOP AND INCLUDE IN THE KIT.?? IF COMPANIES LIKE YOURS WOULD JUST INCLUDE VERY BASIC EXTENSIONS TO CONFORM TO THESE REQUIREMENTS IF APPLICABLE ( METAL OR PLASTIC, SAME COLOR AS THE REST OF THE UNIT ?? POWDER COATED ?? ) AND JACK THE PRICE A BIT, THEN YOUR'S AND OTHER COMPANIES SALES MIGHT VERY WELL INCREASE. ESPECIALLY, WHEN WORD GETS OUT. HOPE TO HEAR FROM YA'LL AND THANK YOU FOR YOUR TIME.
Hi Mike, Thanks for the comments. We regularly sell our products to the US but have yet to hear of this issue. Our product is designed in two sizes. One accommodates plates up to 186mm wide. This is the version we usually sell to the US and is the same size used in the video. This places the centre of the lenses approximately 240mm apart, which should comply with your spacing issue. Our other version is for plates up to 254mm wide. I hope that helps.
Hi George, you can get this item from our website. We can ship to India however you will need to make sure you purchase the correct size product! Also please not postage to India can take some time due to the sheer size of your country.
Hello. Where did you get the plate. please link share your.. thanks
Hi Alper, the product can be purchased here: www.mustardbikes.com.au/17-current-ktm-390-duke-tail-tidy
thankssss
The most beautiful "How to" video i have ever seen. The whole video is clear, bright and with the proper angles that enables us to see clearly the work on the parts. Narration is excellent, little subtle tips given too. Just too good
Thanks for the kind words!
Put mine on today. This is one of the best instructional videos ever. Took me about 35 minutes all told. My Duke looks even sexier now. I had a GREAT experience with Mustard Bikes. Wish they made more parts, honestly.
Thanks so much for the feedback @Forrest Devine! Glad it went on so well for you.
Just bought this mad quick bought it Friday night received it today they are super quick to reply to emails to !
Thanks. Helpful having this playing while Installing
Amazing video, super informative and great camera examples. Thank you!
Thanks for great video. Are the instructions same/similar for 2022 RC390? Want to make sure before purchasing -thank you.
Hi Edward, we have a video install for the RC390 as well, here's the link: ruclips.net/video/3gMak-I9Dxo/видео.htmlsi=ed-lZUV-NUxqqSkc
Cheers!
I hated how the Duke had that long part at the end for the license plate and this made me want to buy the part!
Life saver! Thanks Bud 👌
Where and how do you put the plate then? Ihave a similar license plate holder and before i install it I'm trying to figure out this question
The plate mounts between the indicators on the holder. For locations with a wider plate size we offer a wider version.
I Came to say best instructional video iv ever seen but you guys already bet me to it!
Will this same kit fit rhe 2021 model 390duke??
@Harun aka yes this still fits the 2021 390 Duke!
Just received mine in the mail today cant wait to get it on, just curious, the coloured cables, grey to grey, green to green, then the red is different connection? Take the red off the old?
Hi Simon, Indeed, the red plug from the OEM fender needs to be fitted to the LED bolt. There is a link to another video on how to do this in the Vid description. Hope that helps!
@@MustardBikes Cheers legend
Did the install, everything works but the indicators are flashing faster (duke 390 2020 aust) thoughts?
Hi Luke, did you fit aftermarket indicators? There is no reason the tail tidy install would have any affect on your flasher rate.
@@MustardBikes All I can think it is… I shorten the tail light cable 🤷♂️ stock lights
@@lukejamesquinn that shouldn't affect the indicators flash rate though and is normal procedure for fitment. Have you checked all the indicators are working? How much faster is it flashing? If you are using the oem indicators nothing should have changed.
@@MustardBikes I’ll send through a FB message. If I can’t rectify it I’ll just get it looked at next service. I like the tail tidy still haha
@@MustardBikes all good mate. Figured it out. Feel stupid 😂. Obviously the flash rate it different when engine is running hahaha 🤣 sorry for the hassle.
Good product !
When you disconnect the indicators do they have to go back on the same side it come off or does that not matter as long as you connect the right colour together
Hi there. Preference is to put the same side back on the side it came. Always check your indicators after installation and make sure the right indicator lights up when switching right.
Cool thanks bro 😎
Hi, I have a question. What's the length between the 2 mounting spots for the indicators? (for the 186mm one)
Hi Andries, the 186mm is reference to the spacing between the indicator lenses. IE the maximum size plate you can fit before obstructing the lens (the portion that lights up) of the indicator. If you fit a wider plate you will start to obstruct the visibility of the indicators. Hope that helps!
@@MustardBikes it surely does thanks!
Y la luz que ilumina la placa de matrícula????
Está incluido con el producto, sin embargo, deberá conectar el enchufe original como se menciona en el video. Puede encontrar un vídeo separado sobre cómo hacer esto en nuestras listas de reproducción.
¡Espero que ayude!
Hi. I'm from finland and my licence plate is 165mm wide. Will the 186mm option be the right one for me? Also, will this fit to my duke 125cc 2018 model?
Hi there, the 186mm option would be the closest one to your plate. As far as we are aware this will fit the 125cc model (we don't have the 125cc version here so can't verify).
Hello where did you get the turn signals ? Thankyou
Hi there, these are the stock turn signals that come on the bike in Australia.
@Mustard Bikes okay im in canada , they came different. Which tail fender eliminator would u suggest for me, I have 2017 ktm duke 390
@@Rockmade for Canada you'll want the 186mm version of our product. The indicator mounts for the OEM indicators are the same for both countries. It's just the actual indicator lens portion that differs.
Hope that helps!
@Mustard Bikes I'm looking at aftermarket signals so will this work or is the thread different than the oem one, thanks for the reply I'm looking forward to buying
@@Rockmade in that case our aftermarket version will be the way to go. This has mounts specific for aftermarket turn signals.
How about for a duke 200?
Which tyre do you used? Is that rosso?
Hi, this bike is standard apart from the Mustard Bikes tail tidy, so it has whatever tire is used as standard in the Australian domestic market.
@@MustardBikes the tyre look good in INDIA we got MRF tyres...
Will this fit a 2018 390 Duke?
Hi JH22. This product fits all duke 390's 2017 to current so yes it does fit the 2018 model.
hi mustard bikes, do you guys ship to belgium?
Hi Yorick, Wij hebben meerdere keren naar Belgie gestuurd zonder probleem!
Hi great vid. Are these fender eliminators legal in Victoria?
Hi Glenn, thank you for the feedback! Under Australian ADR laws the rear guard has to meet some design rules, mostly a maximum of 45 degree's upward angle, and some visibility rules. We design our products using these rules as guidelines, however ultimately it is the responsibility of the installer/owner to make sure they comply. So ultimately yes they should be compliant if installed correctly, however for legal reasons we do not claim or promote them as ADR approved.
Will you send it to india?
Hi Nico, we have sent to India before.
Hey, does the original LP light fit as well?
Hi Dimitry, we have heard of a customer fitting it, however it does not have the holes to mount the OEM light as it comes with one of ours pre-fitted. From memory the customer had to add two small holes to make the OEM light fit.
Awesome video.😉
Love from india
Thank you!
Does this fender work for the Duke 125?
Hi Andre, which year Duke 125?
@@MustardBikes Duke 2019
@@andrelaurin3761 Yes, this should fit the 125 as well.
@@MustardBikes Thanks, I will order it soon!
How should i order no mount?
Hi there,
No mount versions are made to order. Simply order via the website, we'll send an email to confirm you want it and then we'll make it. Turn around is typically 2-3 weeks to shipping. The other options we always have in stock. Hope that helps!
@@MustardBikes i’m sorry, what i was asking is which option should i choose. I don’t understand what no mount means. Thank you for answering. Anyways, i ordered the first option. But if you could explain what that means id be thankful. Also, do you think it fits a duke 200? 2020
@@mag4208 shoot us an email at sales@mustardbikes.com with the year of bike, your location and what indicators you want to fit!
@@mag4208 Ah...the no mount option is for use with an integrated tail light. It has no indicator mounts on it.
As for the 200, yes this should fit the 200 Duke.
@@MustardBikes damn. Can i remove those integrated tail lights and add mine?
EXCELLENT VIDEO,
EXCEPT YA'LL MIGHT CONSIDER SHOWING THAT EVERYTHING WORKS AFTER INSTALLATION.
I'M IN THE U S A.
ALMOST ALL STATES HAVE THE SAME REQUIREMENTS AS MINE ( STATE OF VIRGINIA ) WHICH IS STATED BELOW STRAIGHT FROM THEIR OFFICIAL WEBSITE ;
Signal lamps installed on the rear of the motorcycle shall be red or amber and shall be located on each side of the !!!! vertical centerline of the motorcycle !!!!! as far apart as practicable
!!!!!! but not closer than nine inches, measured from the optical centerline of the lens, !!!!!!!
and shall be located on the same level and not less than 20 inches above the ground level.
IF YOU CAN ASSURE ME THAT THE SIGNAL LIGHTS WILL CONFORM TO THE REQUIREMENTS OF VA., (ESPECIALLY WHAT IS BETWEEN EXCLAMATION MARKS)
!!! AND THAT THE 4 INCH X 7 INCH (10.16 CM X 17.78 CM ) VA. MOTORCYCLE LICENSE PLATE
!!! WILL NOT OBSTRUCT !!!!
THE TURN LAMPS, THEN I WILL GET YOUR PRODUCT.
I BELIEVE MOST IF NOT ALL U. S. MOTORCYCLE LICENSE PLATES ARE IDENTICAL SIZE.
THIS SUBJECT IS INTENSELY DISCUSSED ON A NUMBER OF FORUMS WITH U. S. RIDERS AND UNFORTUNATELY RESTRICTS US TO VERY FEW CHOICES FOR TAIL TIDIES ON MANY BIKES.
I KNOW FROM EXPERIENCE THAT THE KAWASAKI VULCAN S HAS THIS PROBLEM (AS OF LAST SUMMER ANYWAY) AND THERE IS REALLY NO REASON FOR IT WHEN A SIMPLE SOLUTION COULD RESOLVE THIS PROBLEM AND ?? SHOULD NOT BE COST PROHIBITIVE ?? FOR YOU ( OR THE CUSTOMER) , TO DEVELOP AND INCLUDE IN THE KIT.??
IF COMPANIES LIKE YOURS WOULD JUST INCLUDE VERY BASIC EXTENSIONS TO CONFORM TO THESE REQUIREMENTS IF APPLICABLE
( METAL OR PLASTIC, SAME COLOR AS THE REST OF THE UNIT ?? POWDER COATED ?? )
AND JACK THE PRICE A BIT, THEN YOUR'S AND OTHER COMPANIES SALES MIGHT VERY WELL INCREASE.
ESPECIALLY, WHEN WORD GETS OUT.
HOPE TO HEAR FROM YA'LL AND THANK YOU FOR YOUR TIME.
Hi Mike,
Thanks for the comments. We regularly sell our products to the US but have yet to hear of this issue. Our product is designed in two sizes. One accommodates plates up to 186mm wide. This is the version we usually sell to the US and is the same size used in the video. This places the centre of the lenses approximately 240mm apart, which should comply with your spacing issue.
Our other version is for plates up to 254mm wide.
I hope that helps.
bye bye tail, and bye bye clean shirt.
Doesn’t work for the 125
Hi King Loomz, which year?
@@MustardBikes I got the 2020, but I apologize, it did work, just had to fiddle round with the cables a little more
@@kingloomz9630 good to hear! You had us worried for a second there.
I like to get it from India
Hi George, you can get this item from our website. We can ship to India however you will need to make sure you purchase the correct size product! Also please not postage to India can take some time due to the sheer size of your country.
Wonder if this is legal in the UK with all our shitty European laws surrounding the rear end
Not legal în Europe :(
Hi there, We have sold many of these to Europe without any issue. Can you explain why these would not be legal?
in norway, these are not legal becouse the licence plate has to be further out than the rear wheel... nobody really cares tho
hi mustard bikes, do you guys ship to greece?
Hi Teo, we do ship to Greece and have done before. Please make sure you select the correct size you need when ordering though!