Tight in the denim - Rocky Mountain Hi - Ep 4
HTML-код
- Опубликовано: 15 май 2024
- We have barely over a month until we have to be ready to go complete in Colorado for the WE RC ROCK Nationals! I still have a ton of work to do but we've made some great progress so far.
Join the channel membership:
/ @harleydesignsinc
WE.RC.ROCK Competition Info: m. groups/1385990...
Follow My Social Media!
HarleyDesignsInc
Facebook.com/HarleyDesignsInc - Авто/Мото
I would have ran the denim panels for the event, and then with the CNC panels afterwords…but that’s me.
I fully support machined panels 10/10. Now get the roof and hood machined too. Sometimes you change directions for a better finish. They look absolutely killer.
I like the idea of the inset leather patch. I love how you always go to 11 with your builds
👍
🙌
Don't fail us by removing half of the theme.
MAKE DENIM GREAT AGAIN.
Nice panels 👍🏾💯
I’d be afraid to put a scratch on that thing. Details details! Great work man. I can’t wait for u to release these files. I’m building an R2 as we speak from my Stance since I finally built a badass VRD Carbon.
I just love that wheel combo. Great choice Josh
CNC for the win 🎉
I love the denim and would love to see you do it again the way it was suggested in the LS. Adding the relief for the leather patch is a great idea too. Good luck!
I'm not sure what I was expecting when you said Jean panels. But it wasn't quite that! Lol. But really like the panels Jim made you. Way awesome.
Jim gets an ATTA BOY on those panels! Soooo sick!
Broke back mountan high !!
😂 have fun guys !! Nice rig josh
I thought the denim panels was an awesome idea and was looking forward to it as part of your theme so not having on is a bit disappointing. Flip side, CNC'd anything is F'n AWESOME! I like the inset leather into the denim roof idea. Keep it up Josh!
Those panels are amazing 🔥. Use the denim for a seat cover or jeans on the driver. Great build
Awesome❤
2 - very disappointed that it’s not full denim. Hopefully Matt kept his promises this week 😂
Not gonna lie, I think it would look the best if all the panels were aluminum cnc and anodized blue
Did you see the new, new rule? Not only does the driver figure have to be separate from the seat, it must be capable of comforting you and talking trash to the other drivers.
That is an awesome kit, great review as usual:) your reviews are the most in depth and informative on RUclips. keep up the good work
CNC reminds me of the 90’s Hot Rod bolt on.
I like the side panels. Also you used all the tools you have available and many different techniques on this build
100% should have stuck with the denim and %1000 need to adopt 4K uploads!
SOOOO disappointed you didn't use the denim. That being said, those cnc panels are AMAZING!
Love the cnc panels. They are a10.
Well I’m not that disappointed that you’re not using denim but definitely jealous of those panels!
High and tight was cool but the machined aluminum is tighter. I vote ditch the denim and go all aluminum panels.
The machined panels represent the big flashy belt buckle.
Wicked awesome 💯👍
10/10, cnc panels! The denim is neat, but it didn’t turn out how I had envisioned. I think I was picturing the panels looking more like if you were to glue denim onto the panel, that way it doesn’t have the saturated compressed look and has more textured look.
Was really hoping for the denim but damn those cnc panels are rad af!
Wait a minute here,,,,, your day job is at Vanquish making RC parts🤯
The CNC panels look sweet. Denim CF looks good too. Either one will look great so whatever haha
gEEZUS every time that explosion blows me ear drums. rig is looking so good! I'm ready to see it run.
Cnc for the win 10+
The CNC panels look amazing! 100% 10
The Denim is definitely different looks cool great idea can't go wrong with machined panels those look Awesome build looks Excellent. Are those Bugle Boy jeans your crawler is wearing LOL thanks for the videos
Awesome work man.
Those panels are sick.
Very cool.
The leather came out cool though.
I want it hahahaha.
Channel members should get a patch.......
🤣🤣🤣
Seriously though good job man.
I wouldn't have kept the Jean panels
aluminum panels are awesome! but, for this build you need the Denim and the leather patch.
Holy shit I’ve watched for a long time
Stick with the denim/carbon fiber/ leather.... don't take the easy way out with the cnc panels. 😅
Love the cnc but would prefer to also have a matching hood / roof to complete the package
A full set of machined panels (inc hood and roof), anodized blue would be awesome.
CNC in Riot Blue is the way to go.
I'm at a 5. I'll save judgment for when its complete.
9/10 sorry for you about the denim panels not fiting nice. It was quite interesting as an cosmetic option.
I see your difficulties in choosing between those really slick aluminium panels and those exiting Dinim panels. I would go with the aluminium for this build and use the Denim in a later one.
Freaking computers are amazing
Cnc is awesome but you should keep it high and tight for the event!
Scrap the denim. Go full CNC!!!
Would been cool to continue with the denim (3), but you do you Josh
The denim was a cool idea but didn't think it would work very well. The new machined panels are bad ass. So kinda disappointed but I would go machined as well.
Maybe a belt buckle for a grill 🤔
7
Run the denim and use the CNC for display
denim panels for sure. run the cnc panels after the event. unless your going to cnc a hood.
You should see it you can get the door panels to look like the patch
I am curious about why the carbon fiber backing? Denim and epoxy is micarta - which is incredibly strong and durable on it's own.
Make sure all your servo horn screws are tight and lock tightened
Det så hyggeligt ud.👍 Vi havde også en god tur i Hvorup.😃
Anodize the side panels to match the wheels.
The denim looked cool, carbon fiber would've been better. But the CNC panels are the best looking, should just do the hood and roof at this point
You should name it Harley in the Levi's font and your area code in the Levi's font. Would look like a Jean style.
The lack of denim is disturbing.
Hate to see you are not running Futaba any longer.
1.
No life till denim!
I'm saddened by the lack of denim now. Whatever you ask the rating for, I give it a three because it's not 100% themed
CNC Aluminium all the way
Totally expected denim too bad you gave up on it!!!
I would definitely have Jim do the rest of the truck in machine panels and I would not touch them I would leave them in their raw finish they look gorgeous you're tripping if you ask me
I’d have to go with a 9. Denim is badass and you hate the ripper but yet want panels like it???
Did them side panels that's what the whole truck should have on it right there that son of a gun is beautiful you've done an amazing job brother I definitely would do the roof like that with a divot in the front of the roof Maybe
Use a zipper-like design for the grill. Who's going to detail your driver? That requires...PAINTING! I can appreciate CNC panels, but a solid 2 for copping out on the full denim. At this point, just CNC the rest of the panels, too. The mixed panels look weird.
Hm. I think its pretty cool doing what you are. I am bummed you are not doing denim panels for everything, but the machined panels are pretty sweet.
You should C&C the hood like a brand and do it old school with heat.
Cnc 4 da dub
Is it really necessary to use a block that big to cut those side panels out of I mean I can see how it could help stabilize stuff by being that big like by being able to clamp it down more but I don't understand if you're just cutting something that you know what I mean I'm just trying to understand
It pretty much is, because the depth of the panel goes from the front to the back nearly. That's how all machining works, start with a big block and make a smaller part.
-10 out of 10, Josh just use those fancy side panels on the next moon buggy build and redo the denim side panels!
1! But thers an easy solution. Do it like matt and use the denim at the comp and the nice and clean cnc parts for display. Done. Thank me later :)
What about using used denim? Would be more pliable than new denim. You could get them cheap from a thrift store
Was it tbe leather expansion when wet that caused the issue of movement in the mold?
Is Nicole jealous of your new Cnc panels?
imagine for a moment how many like minded people would love to hold a piece of denim or a sweet CNC ALU paneled crawler from a solid block. ill like what ever you choose, but jeans
p.s i dont like the colour blue
1 for disappointment the cnc is so much nicer and then anodized come on its gonna look so sick Matt's copper is pretty cool but this seriously steps your up a bit I think
Not disappointed at all…is that 10?
Looks like enough material to make two sets of panels🤔
I say ditch the denim!!! Go all machine panels. It looks to sick not to.
10
The benefits of carbon fiber are obvious, but to me so is the scale. I'm a scale nerd, so the size of the weave is all wrong to me.
why not skin the side panels in denim?
0. CNC 4 the win. 10
I am at a -1 million percent disappointed that u don't want to run the denim
CNC panels are way cooler than the denim!!
THE most awesome thing in the world, who says no to CNC..... except for condoms
I thought you where doing all machined panels the mix is no biggie of course the aluminum panels are way more bad ass than denim
Do da rules allow ya ta use da driver attached to da seat?
OK I continued ta watch 😆
I think CNC with blue anodizing will be sweet. I think the hood still gets your moms house points. Keep em high n tight! Sending hate from Arkansas...
1 and 10
3.
More disappointing all panels aren’t cnc 10/10
10 how could you say no to CNC
I like the machining video but I has to pee twice while it was playing…..