French cars are almost impossible to do an oil change without getting oil everywhere. Especially when they have the square bolt for the oil pan or the stupidest placements for oil filters
the more modern citroens and peugeots have that same style plug but with an 8mm hex that start leaking as soon as you crack them loose it's so annoying
So basically today I became the owner of a Twingo, it's not in the best shape, but it will do just fine for my first nugget... I'm irresponsible with money
4:56 you have got to be joking. This is the wierdest flex I've ever seen. Bro has w e i g h t r e d u c e d b r a k e l i n e h o l d e r s. On a stock first gen Twingo.
@@deadboy9955 Well, yes, rust is technically heavier, but you won't need to spend time and effort in removing parts from your car when they fall off from rusting to hell.
As the RGB Bois, y'all need their color combos next. As follows: "The Eloh", "The Sianne" and "The Mehjentah" Just saying 🤷🏾♂️ Also watching y'all fight the Twongis is my latest obsession here ❤❤
That's why I never start fixing the issues on these kind of cars. When you start digging, you keep finding and finding forever and usually not in a good way. Basic maintenance and what is needed for safe driving.
But not use the cheapest parts available. Fix the stuff that you need fixing, properly. I've been redoing all the stuff on my nugget the preowners absolutely cheaped out on.
@@Isaki138 so far I had mostly luck with cheap parts. Only essential parts like critical sensors or other similar stuff I buy OEM or when the car is known to act up. Like Fords if you don't buy Ford spark plugs it is hit and miss but In Germany you can buy original Ford sparts also online for not a lot of money. Germany is a bit of a spare part heaven
i think because its a red green and blue trio of twingos you all should have one pokemon car of your twingo color hanged on your rear view mirror (red charmander, grin bulbasaur and blue squirtle)
@@hetisjasper2452 one time at trade school someone had misplaced the 8mm square socket so I got mad and ground a 10mm hex key into an 8mm square at the bench grinder
My greyy is finally registered and up and running, im so happy to have a twongi :D (and btw its in near perfect condition with 136000KM bcus it belonged to a city as an official city worker car so it was always maintained well.
for tip - cut a soda bottle in half , get a good grip round the bottom half and cup the filter w it while you screw , no mess on u r hands and zero spill (you gotta loosen it first doe) lol
to make the rust converter work the part should still be rusty or the rust converter won't convert the rust. tho optimally use rust converter, wirebrush away the loose rust then apply the rust converter to the still rusty part converting the rust.
From the states here this looks like an absolute blast and a pain in the ass to work on! If I had a couple buddies helping me out it would be a lot of fun and easier.
Jeez, guys.. Shock-absorbers head nuts are forbidden to unscrew by pneumatic instruments!! It is even written in all official manuals. You has been extremely LUCKY to not meet HUGE oil fountain by destroyed shock-absorber. It is actually pity to see that this "common" behavior of workshop workers are the same all over the world. Some workshop actually destroyed my Shock-absorbers by this rookie way when I was not around.
I bought a new car with warranty last year because I absolutely hated working on the nuggets and never wanted to do it again, now everytime I watch these videos I want a nugget again.
What exactly defines a nugget? I just bought my first car yesterday a 2000 Toyota duet and it is fairly small but does have 4 doors. I find it positively charming.
5:24 space the plate using washers made from steel. That way the washers will bond to the aluminium rather than the aluminium bonding to the frame, right?
3:06 take a pressurized pump bottle, put some bar and chain oil inside and spritz that cavity thoroughly, let it set (it will get tacky) and then repeat at least 2 more times. This won't allow the water to settle in there and prevent rust from forming. If you repeat this thing (plus cleaning) every oil change, you're not going to see rust in there.
Guys wonder about small and tiny oil filter, but almost exactly the same size I have at my SR20deh (2.0) nissan primera GT. No surprise if its actually the same size and same filter, because nissan married at renault back then (probably nissan get infected with rust by renault back then, kek & lol. Always remember about protection, kids!)
I adore the type of energy you bring to these videos because not a whole lot of automotive content steers towards this anime gran turismo feel Also what is the track at 4:10 ? Keep hearing it and it's so good
But when are the Twongies gonna be slammed and put on intra wheels as they are on the nuggetopolis picture? We all know that a properly slammed half broken shitbox is superior to a well maintained stock car.
You should buy 3 of those Temu / Ali Express mini spoilers and stick it on the RGB gang twings 😁 love it, i wish i had less than 2meters so i could fit on a twingo 🤣 big love from Portugal my dear rgb friends
why dont yall buy proper tool for those square drain bolts, i bought i think yusa brand 8mm-10mm s shape for little bit over 10 euros, it wont hurt to buy it
Yall are still missing the ielow
Yesss
The grei too
We need someone else close to them to start the "shade" collection.
As goes:
"The Blaq", "The Grei", and
"The Wyte"
Yelo
They have RGB now it's time for cijan, magent and ielow
The only thing you could possibly dislike about this series is it's potential to inflate the price of twongies.
My worst nightmare 😔 I seriously need twongie as my collage shit box so this is literally my worst nightmare
French cars are almost impossible to do an oil change without getting oil everywhere. Especially when they have the square bolt for the oil pan or the stupidest placements for oil filters
the more modern citroens and peugeots have that same style plug but with an 8mm hex that start leaking as soon as you crack them loose it's so annoying
@@TheAllAroundMan and even more modern ones have that plastic pan that is with the clip and the plastic plug, which imo is even worse
Specialy citroens 😂
Peugeot 206: let's Route the exhaust unter the oilpan Genius!
Mainly 1.2 16v D4F and old 1.5DCi K9K have the worst oil filter positions in automotive history
"prevented a possible intimate contact between the valves and pistons"
So basically today I became the owner of a Twingo, it's not in the best shape, but it will do just fine for my first nugget... I'm irresponsible with money
congrats and welcome to the cult
Good to see the Twongis back
You know the drill
The Twin(gos)
Give the Redd painted bumpers so they match and then take them on the Autobahn.
Going flat out I bet your gonna get over 80 mph before they explode.
Only 8 more mph and they'd make it back to the French revolution
@@LeveLUP. nice. but where’s the mr.fusion home energy reactor, eh?
4:56 you have got to be joking. This is the wierdest flex I've ever seen.
Bro has w e i g h t r e d u c e d b r a k e l i n e h o l d e r s.
On a stock first gen Twingo.
You take what you can get in these here streets
Why did you take that seriously lol. its just humour
I could watch this all day and im not even that into cars
just something so comforting about twongis
Me too
Did u guys see the 500hp Honda K swapped Twingo Misha Charoudin drove on the Nordschliefe? Lol
Finally boss twongi
Certified "How did it fit in there!?" episode
Honestly I think that’s my hands down favourite Misha ep he’s done yet. Just looks/sounds bonkers!
Rust is just free weight reduction. Car is practically ready for racing.
Isn't rust heavier by weight? I guess it's the metal turning to dust where the true weight reduction lies.
@@deadboy9955 Well, yes, rust is technically heavier, but you won't need to spend time and effort in removing parts from your car when they fall off from rusting to hell.
"The screwdriver has to be an extension of your body. You have to feel what the screwdriver is doing..." The wise Yoda has spoken! 😁
17:57 so relatable. I can take engine oil, gearbox oil even coolant but fuck brake fluid
Its part acid and kills you if it gets in your body so... Yea it's the nastiest chemical in a car.
As the RGB Bois, y'all need their color combos next.
As follows: "The Eloh", "The Sianne" and "The Mehjentah"
Just saying 🤷🏾♂️
Also watching y'all fight the Twongis is my latest obsession here ❤❤
And then their wierd friend can also join in with his "The Quay" for the full CMYK look
8:22 you did WHAT!?
That thing is NEVER gonna off there again.
Yeah, filter wrenches should only be used to break one that's been through 4500 heat cycles free.
RGB BOYZZZZ❤❤🎉🎉
O good... Why did he do that.
It's probably a joke for the video
No worries, the trick is to not go full caveman. 👍👍
That's why I never start fixing the issues on these kind of cars.
When you start digging, you keep finding and finding forever and usually not in a good way.
Basic maintenance and what is needed for safe driving.
In the last minute you said the same thing with you keep finding. Uppsi
But not use the cheapest parts available. Fix the stuff that you need fixing, properly. I've been redoing all the stuff on my nugget the preowners absolutely cheaped out on.
@@Isaki138 so far I had mostly luck with cheap parts. Only essential parts like critical sensors or other similar stuff I buy OEM or when the car is known to act up. Like Fords if you don't buy Ford spark plugs it is hit and miss but In Germany you can buy original Ford sparts also online for not a lot of money. Germany is a bit of a spare part heaven
Twongis are my favourite pokemon
At what level does Twingo evolve to Clio? And whats the last evolution, Mégane?
i think because its a red green and blue trio of twingos you all should have one pokemon car of your twingo color hanged on your rear view mirror (red charmander, grin bulbasaur and blue squirtle)
if your shop doors have an 8mm door handle pin you can use that on the drainplug, i know this because my boss was too cheap to buy a proper tool
@@hetisjasper2452 one time at trade school someone had misplaced the 8mm square socket so I got mad and ground a 10mm hex key into an 8mm square at the bench grinder
Yesss, My Nuggetopolis sticker showed up yesterday! Now an upload today!
I appreciated the written note you included.
Yeah same, mine arrived today about 30 mins before the upload! That written note just gives that very appreciating feeling
i want twingo when i grow up
I also want to be a twingo when i grow up.
Paper towels and IPA are pretty bad to wipe surfaces with, they leave little bit of wood fiber behind. Uncolored cloth is better
for a second I thought I was watching a bad obsession motorsport video when jeff showed off his brackets
the illusion of free choice
I aspire to be a nuggeteer one day, if I am worthy. Beautiful work as always, can't wait for your entry into Le Mans, should be memorable!
My greyy is finally registered and up and running, im so happy to have a twongi :D (and btw its in near perfect condition with 136000KM bcus it belonged to a city as an official city worker car so it was always maintained well.
i was just checking your channel yesterday looking for gems like this
for tip - cut a soda bottle in half , get a good grip round the bottom half and cup the filter w it while you screw ,
no mess on u r hands and zero spill (you gotta loosen it first doe) lol
I get so happy when a new video in this series comes out
A few years ago I saw a fully golden Twingo. Like bumpers and all, with golden hubcaps. It was like a shiny pokemon.
Please get the torch onto the dront bumper so it looks fresh! I done did it with every plastic part and it makes them brand new
to make the rust converter work the part should still be rusty or the rust converter won't convert the rust. tho optimally use rust converter, wirebrush away the loose rust then apply the rust converter to the still rusty part converting the rust.
Now its RGB but it should be RGBY
They need a fourth friend
1:38 pave the way, put your back into it 🎶
That oil was like it was out of a cartoon
So you didn't show lubing up the oil filter seal, but you did show tightening up the oil filter with a chain tool. Perfect problem for future you.
From the states here this looks like an absolute blast and a pain in the ass to work on! If I had a couple buddies helping me out it would be a lot of fun and easier.
I wish we had these little nugget cars in the US. Closest we get is Honda Fits and 90s Suzukis
Jeez, guys.. Shock-absorbers head nuts are forbidden to unscrew by pneumatic instruments!! It is even written in all official manuals. You has been extremely LUCKY to not meet HUGE oil fountain by destroyed shock-absorber. It is actually pity to see that this "common" behavior of workshop workers are the same all over the world. Some workshop actually destroyed my Shock-absorbers by this rookie way when I was not around.
1:37 Pave the way, put your back into it
lol
Great video mate ;)
I bought a new car with warranty last year because I absolutely hated working on the nuggets and never wanted to do it again, now everytime I watch these videos I want a nugget again.
these cars are so delighftul, glad to see them being taken care of :D
ITS LIKE POKEMON STARTERS NOW.... I GET IT NOW. Still missing yellow
10:47 you sould sell samples of the forbidden Twingo cake.
11:35 why does bro look like max verstappen
Shouldn't you tighten the oil filter by hand, and only unscrew it with the chain braker? 8:21
Yes
1:07 Bluetooth Lambda sensor lol
EDIT: I just saw the green cable
Need to see a twongy slammed on coils lol
yay, another nugget video!
finally new twongi video, i cant get enough
What exactly defines a nugget?
I just bought my first car yesterday a 2000 Toyota duet and it is fairly small but does have 4 doors. I find it positively charming.
you all put so much care into working on these cars, its amazing
5:24 space the plate using washers made from steel.
That way the washers will bond to the aluminium rather than the aluminium bonding to the frame, right?
3:06 take a pressurized pump bottle, put some bar and chain oil inside and spritz that cavity thoroughly, let it set (it will get tacky) and then repeat at least 2 more times. This won't allow the water to settle in there and prevent rust from forming. If you repeat this thing (plus cleaning) every oil change, you're not going to see rust in there.
Guys wonder about small and tiny oil filter, but almost exactly the same size I have at my SR20deh (2.0) nissan primera GT. No surprise if its actually the same size and same filter, because nissan married at renault back then (probably nissan get infected with rust by renault back then, kek & lol. Always remember about protection, kids!)
i already cant wait for the next episode! really love what you guys are doing
thank you mr nugget man for blessing us with more nugget content
I adore the type of energy you bring to these videos because not a whole lot of automotive content steers towards this anime gran turismo feel
Also what is the track at 4:10 ?
Keep hearing it and it's so good
Mmmmm, forbidden cake...
I love your vids, and my (relatively) new love for the first gen Twingo
But when are the Twongies gonna be slammed and put on intra wheels as they are on the nuggetopolis picture? We all know that a properly slammed half broken shitbox is superior to a well maintained stock car.
9:15 in Poland we are saying Katalizator to catalytic converter 😂
I like this content a lot, keep going!
14:14 - 14:36.
comedy gold.
YEEES! MORE TWINGOOOOOOO!
my grandparents have a Renault twingo 1st gen and I love it
I have a lime green Twingo, it's a beauty
look at the cute lil demonic twongís :)
THE LEGACY OF THE RED TWINGO
LONG LIVE THE FRENCH NUGGETS
I yearn to import a comically small nugget, but should really focus on my 85 Supra instead
You should buy 3 of those Temu / Ali Express mini spoilers and stick it on the RGB gang twings 😁 love it, i wish i had less than 2meters so i could fit on a twingo 🤣 big love from Portugal my dear rgb friends
Keep up the good content, my three Nuggeteers !
3:19
-"kill him jeff"
-"BRRRRRRRRRRRRRRRRRRRRRRRRR"
There's not a rear disk conversion for the twongel? I would pay irresponsible amounts of money to never have to deal with drums.
Thats a low rust Pennsylvania car
I think i actually want one of these cars, its uneque
These cars say ^u^
I'll come up to you guys with just wheels, so you can be the RGBA squad, I'll be the Alpha, so mine will be transparent.
no one:
absolutally no one:
LED on my computer:
Hey, thank you very much for the lovely sticker that arrived today!
I love your content keep it up ❤
What brand of tools do you guys use? Would love to see a tool video.
You need more friends to get, the ielow the wyte, the blaq, and the grei
I want the anime girls to be more present than just the thumbnail 😭
Splendid.
Zdej pa še js hočem svoj twingo :3 Koliko si zapravil denarja in časa za svoj avto in vsa popravila?
I am so proud to see more nugget related content while waiting for more garbage time to upload
That's not a nugget that's a whole chicken
I like this upload schedule, every 2 week new video
WD40 is kinda meme. If you truly need something loose then try Liquid Wrench penetrating oil. I was able to remove bolt from turbo mount with it.
Svaki put kada video izađe odmah počne pjesma svirat The boys are back in town XD
It looks so happy 😄
BABE WAKE UP NEW NUGGET DROP!!!!
Imagine a collab between a them and dankpods. If we are talking about "nuggets" :D
Yellow, Cyan and magenta twingo when?
Waiting for CMYK twingos :D
the cheapest twingo in my area is 10k but that's because I live In america
there,
I want a Twongi...
They did not make this twingo in the UK 😭 I’m moving to EU solely for twingo
why dont yall buy proper tool for those square drain bolts, i bought i think yusa brand 8mm-10mm s shape for little bit over 10 euros, it wont hurt to buy it
I still have some twingo gen 1 tuning parts for sale if ur near germany bois