Hi Brent! I was just at your shop on June 27th. I believe this car came in with mine. I talked to the owners in your lounge...nice couple and you carry great coffee!!! Anyway, I bet they are really pleased with the results. The car sounds fantastic!! Just a comment on your service provided to me. In the years I have been coming to your shop, everything you have done to my cars makes the trip worth while. This last trip was no exception. Your team advised, sold only the parts and services I needed, and professionally installed them...it is a dream come true. My 2014 Mustang GT has improved drive-ability. Quicker acceleration and the M-82 shifts are sure and very smooth. Thank you George...Thank you Brenspeed!
I can get a saleen blower kit for 5000 canadian, but where its not made anymore im worried about parts if needed and how much power can they make on a forged 3v? Max boost?
Honestly to me E85 on that set up is a waste. You can basically max out what would be considered safe with a 3.4 pulley and premium fuel. E85 would require larger injectors, better fuel pumps, and then you would basically tune it to be safe and not be taking advantage of the E85. To answer your question though vs. 93 you might be 40 more HP and torque if you tuned it for the E85 but you would easily exceed what I feel is safe on the stock engine which is about 450 torque to the tires roughly.
Hi if you are wanting to come to us in Indiana you would email quote@brenspeed.com for current pricing. In the mail put what you have and what you want. Thanks
Brent what's the most hp you guys have seen out of the saleen series 6 blower on these 4.6 3v's?? I'm looking to building my motor. And installing a 2.875 pulley.
David two things on that. I dont think you will, BUT, the Saleen Supercharger has been discontinued for many many years. We do have one here we can install that we rebuilt we do not get them very often. If you are interested in one they are awesome, just give us a call 574.594.9559 option 5 for installation.
Hey Brent. Next Summer I'm going to be ordering my parts from you guys! Planning ahead! What would you say is a reliable high 11 second combo for a 2007 Saleen SC? I plan on running your stage 3 kit with 93 tune. Off road X Pipe with stock headers. Upgraded half shafts, upgraded clutch and a big little combo!? Am I on the right track? Bone stock she ran a 13.3 @108 on all seasons with a 2.1 60ft. Thanks Brent!!! I can't wait to get this thing running good!
Yes you are on the correct track, your 60 foot is an issue so wheels with good tires should solve that. Add aluminum driveshaft to the mix and drive hard and it should be close.
@@BrenspeedEngineering thx Brent. Took her back to the track and bone stock I got her to run 12.9 @111 with a 2.1 60ft with bfg comp 2s all season tires! I'm actually impressed and happy I got her in the 12s with the all seasons! Next summer goal is def 11s with some 9f your goodies! I'm hooked! Is 12.9 decent for a stock 2007sc car with 3.8 pulley? I sure can tell you my throttle response sucks with the saleen tune lol
I have a 08 Saleen with the stage 3 kit and arh longtube headers. I was thinking of doing cams and a 3.2 pulley would that be to much for the stock block.
@@davidpowers8266 Well with traction if you know how to drive 11's is not an issue. With a stage 3 kit, cams, and headers you are approaching 500 rwhp give or take.
Douglas we do have a package we do here only in house not mail order. If you can come in just email quote@brenspeed.com and they can give you a price. It will include upgrades like boost, fuel, tune, MAF, plugs, and anything else you may want. THANKS FOR WATCHING.
Need more 05-09 saleen videos like this!
Hi Brent! I was just at your shop on June 27th. I believe this car came in with mine. I talked to the owners in your lounge...nice couple and you carry great coffee!!! Anyway, I bet they are really pleased with the results. The car sounds fantastic!!
Just a comment on your service provided to me. In the years I have been coming to your shop, everything you have done to my cars makes the trip worth while. This last trip was no exception. Your team advised, sold only the parts and services I needed, and professionally installed them...it is a dream come true. My 2014 Mustang GT has improved drive-ability. Quicker acceleration and the M-82 shifts are sure and very smooth. Thank you George...Thank you Brenspeed!
THANKS!
Dream car 😍 s281 sc with Detroit rockers and pypes long tubes
That would be sweeeeet!
love my 07 with a Saleen Blower. Old school
I love how you guys still support the 3v when everybody else just shits on them.
Not a problem I will keep them coming.
Loving the informative videos! Keep them coming!!!
gotta love 3vs! y'all are awesome!
485 is a great number. Brent, did these saleens come with forged internals? I tend to think not since you're only putting in 9psi.
Only if I could find one of these blowers
Not bad power at all especially at only 9 psi.this on 91,93 or e85?
Race On 3 Productions 93 octane. This kit can also be ordered for 91 octane.
I can get a saleen blower kit for 5000 canadian, but where its not made anymore im worried about parts if needed and how much power can they make on a forged 3v? Max boost?
hey Brent what sort of gains would you see running E85 on this car or mine with the super shaker
love all these videos keep up awesome work
Honestly to me E85 on that set up is a waste. You can basically max out what would be considered safe with a 3.4 pulley and premium fuel. E85 would require larger injectors, better fuel pumps, and then you would basically tune it to be safe and not be taking advantage of the E85. To answer your question though vs. 93 you might be 40 more HP and torque if you tuned it for the E85 but you would easily exceed what I feel is safe on the stock engine which is about 450 torque to the tires roughly.
What's your biggest badest supercharger,to aquire over 600+ hp
Watch this playlist it will answer a lot of your questions. ruclips.net/p/PLyyePPaOSI81BtzSrQjoJ_rJzqp6xzk1t
Has anyone ever done the Anderson F53 cams on a 3 valve
hey brent how much will it cost to swap out my cams to detroit cams and rockers and rollers
Hi if you are wanting to come to us in Indiana you would email quote@brenspeed.com for current pricing. In the mail put what you have and what you want. Thanks
What do you have for the 99-04 Saleens?
Hi those cars were all built different so not much mail order. In house mostly just headers and bolt on parts. THANKS
Brent what's the most hp you guys have seen out of the saleen series 6 blower on these 4.6 3v's?? I'm looking to building my motor. And installing a 2.875 pulley.
Jesse Baxter at 550 to 600 rwhp they become very inefficient.
If I own a 2005 3V Saleen, will I destroy the value and collect-ability if I install a genuine Saleen supercharger?
David two things on that. I dont think you will, BUT, the Saleen Supercharger has been discontinued for many many years. We do have one here we can install that we rebuilt we do not get them very often. If you are interested in one they are awesome, just give us a call 574.594.9559 option 5 for installation.
Saleen had made mustangs in the 90s.
Thanks for watching!
Hey Brent. Next Summer I'm going to be ordering my parts from you guys! Planning ahead! What would you say is a reliable high 11 second combo for a 2007 Saleen SC? I plan on running your stage 3 kit with 93 tune. Off road X Pipe with stock headers. Upgraded half shafts, upgraded clutch and a big little combo!? Am I on the right track? Bone stock she ran a 13.3 @108 on all seasons with a 2.1 60ft. Thanks Brent!!! I can't wait to get this thing running good!
Yes you are on the correct track, your 60 foot is an issue so wheels with good tires should solve that. Add aluminum driveshaft to the mix and drive hard and it should be close.
@@BrenspeedEngineering thx Brent. Took her back to the track and bone stock I got her to run 12.9 @111 with a 2.1 60ft with bfg comp 2s all season tires! I'm actually impressed and happy I got her in the 12s with the all seasons! Next summer goal is def 11s with some 9f your goodies! I'm hooked! Is 12.9 decent for a stock 2007sc car with 3.8 pulley? I sure can tell you my throttle response sucks with the saleen tune lol
I have a 08 Saleen with the stage 3 kit and arh longtube headers. I was thinking of doing cams and a 3.2 pulley would that be to much for the stock block.
David Powers we prefer a 3.4 on the stock block. Cams are just fine on your current package.
How much rwhp do you think it would make. I was thinking of driving down there and having you guys install them. I'm shooting for 11s in the 1/4 mile
@@davidpowers8266 Well with traction if you know how to drive 11's is not an issue. With a stage 3 kit, cams, and headers you are approaching 500 rwhp give or take.
@@BrenspeedEngineering Did you not lose boost with the cams and headers? And what octane fuel was this 91?
What kind of package you have for a 2000 supercharged saleen?
Douglas we do have a package we do here only in house not mail order. If you can come in just email quote@brenspeed.com and they can give you a price. It will include upgrades like boost, fuel, tune, MAF, plugs, and anything else you may want. THANKS FOR WATCHING.
What gears do you recommend for a stage 3 package
I like 4.10 because I love the torque. Thanks!
@@BrenspeedEngineering would them take it out of the powerband to quick with a twinscrew
Is the any benefit s of making a 100 octane tune for a stage 3 kit on a stock engine