ANSYS Fluent Tutorial | Heat Transfer Analysis In a Longitudinal Finned Pipe | ANSYS R19 Tutorial
HTML-код
- Опубликовано: 20 авг 2024
- It is a pipe with fins on its outer surface. There is convection and radiation from the fins. Inside the pipe, the hot fluid enters & at the outlet, there is a change in temperature of the fluid due to the heat transfer from the pipe outer surface. The change in Fluid temperature has been found out.
#ansysfluent #ansystutorial #ansyscfd
At 3:30, just a small correction "number of copies does not include the parent profile". The parent profile is excluded from the number of copies while specifying the pattern. Otherwise, indeed a very helpful tutorial Sir.
Yes you are right its a mistake. Sorry for that.
meus parabens pelo tutorial! Aqui no terceiro mundo ou voce paga uma fortuna para estudar ou voce aprende ingles! Parabens e obrigado! perfeito tutorial! deus abençoe!!
Muito Obrigado
Good tutorial. Hope to learn more from this channel 👍
Thank you.
Learnt a lot.Thanks😇😇
Thank you.
Nice tutorial!
Thank you.
Excellent work. Please make a tutorial for radiator tube with fin.
Thank you. will try to.
very nice tutorial video
Thank you.
Bestest ever👌👌👌
Thank You🙂🙂🙂
Thank you
🙂
Most welcome.
wqow excellent tutorial ever. could you please make a tutorial in the following days regarding water turbine sir ? it would be great to see over here thx in advance :)
will try . thank you🙂🙂🙂
omg teacher thank u so much the best information ever i need that so much thank so much 😀, please teacher if it's possible do the same example for the CFX please if it is possible i really learn more from this tutorial the best of the best 👏👏👏👏👏👏👏👏👏👍👍👍👍👍👍👍👍👍👍❤️❤️❤️❤️❤️❤️❤️❤️❤️💐💐💐💐💐💐💐💐💐💐💐💐💐🙏🙏🙏🙏🙏🙏🙏🙏🙏
Thank you, will try.
Good... Its great..
😊
Thank You Rakesh 🥰🥰🥰🥰.
I exactly followed the steps in the video but after final meshing he had 184447 elements while when I meshed exactly following the same steps I had 622688 elements. I was wondering where I am going wrong or what's happening. The reason is that the final mesh taken for solving in fluent has body sizing with element size 3 mm not 1 mm.
The default mesh setting might be dominating the custom mesh settings. Check if you have selected the mesh behaviour to "hard" in each sizing.
Great video!
Thank you.
Hi there
I am going to simulate a fire in tunnel by using fluent ansys and I have question
about the density of air inside the tunnel how should i define it is it incompressible ideal gas or ideal gas
the problem is transient
grateful
yousef
Please can you make a video on "Helical finned boiler economizer". Thank you
wii try to.
@@AnsysTutor Thank you..
Can you please share the geometry of " Finned Economizer" ?
e-mail id - abhianandju@gmail.com
Thank you.
Is there a way we can show air of 25deg C flowing over the fins
For that we need to create another enclosure domain over this fin. In that you can define the inlet temp. Of air as 25 decree celcius.
whwn ı go to setup, It says the error "This is an educational executable, and can only be used with cases containing less than 512,000 cells."
ı have this error . what can ı do for that ? please help me
Go to meshing and increase the mesh cell sizes to decrease the no of elements and node . Try to keep the no of elements within 512000 as you are using a free student version software.
@@AnsysTutor thank u so much ,it worked. But ı want to learn a last thing . what is the purpose in this project , what did we learn as a result ? Because ı didnt understand what we did and what we learnt in here . If you explain that , ı will be so happy really .
It would be not right to say it's a project, it's a tutorial demonstration of how to create the geometry, meshing and put the boundary conditions etc. You might have seem the problem description ,it's a simple fluid flow & heat transfer problem . It's suitable for viewers new to ANSYS fluent. Such type of tutorial helps them to become familiar with various tools and options available in this software.
@@AnsysTutor ok . thank u
Can we set the outer surfaces to be rotating?
Yes
Is there any difference between filling the inside and creating a frozen cylinder and giving if fluid type there?
Yes, frozen does not mean it's frozen like ice.🙂 it's just a name to define the geometry as a separate entity.
@@AnsysTutor Yes I know that. I am just asking is a frozen body same as the fill option? or are they different?
do you have any written document about this project?
Its not a project. Its a software tutorial demonstration. Dont have any written documentation .
Hi Ansys-Tutor , how can i contact you?
ansystutor7@gmail.com
how u can rotate the object when u name the finned section ?? i can't do that :))
Use ctrl key and middle mouse button.
@@AnsysTutor oh thank you very much :))
can you share the file to download?
Sorry, dont have the file
Instead of that stupid music, if he explained, it would be really helpful.
In our recent tutorials we had modified something please have a look.