Fluid Structure Interaction(FSI) | Flow and Heat Transfer Analysis in T-Joint |ANSYS Fluent Tutorial
HTML-код
- Опубликовано: 8 сен 2024
- This tutorial shows a high-temperature fluid flow in a pipe through a T-Section and the effect of temperature on the Pipe Material. The deformation of the pipe caused due to the fluid temperature has been analyzed. The temperature distribution effect from the ANSYS Fluent has been used as a thermal load in the pipe body Structural analysis. The pipe deflection and equivalent stress and thermal strain have been found.
What will you learn from this Tutorial?
- Creating a T-Section in ANSYS Design Modeller
- Use of shell/Thicken Option.
- Use of fill option to fill the pipe with another domain.
- Global and Local Meshing
- Creating a link between fluent and static structural
- Solver set up in Fluent
- Solver setup in static structural.
- CFD post-processing
- Static Structural Post-processing
![ARGENTINA vs. CHILE [3-0] | RESUMEN | ELIMINATORIAS SUDAMERICANAS | FECHA 7](http://i.ytimg.com/vi/De3AWmXzhuA/mqdefault.jpg)
I had had a hard time learning Conjugate heat transfer, but you make so easy and you also show how coupling is done. Thank you man. You are great!
You are most welcome.
Thank you for adding this ansys lecture . I am learning in lockdown and have benefited this valuable knowledge.
Wow that's great . Thank you.
This is a very informative tutorial. Thank you very much.
most welcome!!:)
thank you very much! ive been searching the internet about FSI more then 1weeks but nothing to get. i just found your video,, now i got it!
and i have a question.
Is it possible to have 2D FSI using Ansysworkbench?
Awesome tutorial. Thank you so much. Would love more tutorials on fsi, especially on compressor/turbine blades if possible.
Thanks David. Will try to add more tutorials on that.
Very much appreciate for your RUclips channel.
Thank you
i loved this tutorial...thank you so much
Thanks:)
A very good tutorial,thanks
Most welcome.
I want ask you about import point wise file to static structure if you know how to doing that plz learn me.
My best regards
very nice sir, thank u so much 😀😀😀 i wish this tutorial included CFX too 🙁😞
most welcome
Nice one
Thank you Prince.
Man...!!!!great job👏👏🎬
thank you so much🥰🥰🥰
thank you so much
most welcome
This video is very nice and important to understand the fluid structural intercation. I have a question for you, can you tell me how do you have set the condition of outlet zone? thank you very much
@14:30 you can see the outlet is set as pressure outlet.
Sir, I have a question. I'm doing my project on magnetorheological shear thickening polishing for brittle materials. However, I'm doing simulations with ANSYS software for CFD, and I have obtained satisfactory results. But for solid mechanics, I want to check when cracks and fractures will occur and how the penetration of grits or abrasive particles could impact this. Could you please help me with this?
Its a great tutorial. Thank you so much. is there any referance papar that i can validate the above t-joint result? or any simple shape of pipe.
Sorry, this tutorial was created without any reference paper.
Thank you for sharing good information. It is a very helpful media. May I ask you something? I just want to know the meaning of "Imported Body Temperature". Why do we need to put "Imported Body Temp" variable. Thank you again.
The " temperature" is imported from the ANSYS Fluent Results, the temperature distribution inside the pipe might not be uniform due to fluid flow & convection , so the temperature distribution has been analysed in ANSYS Fluent CFD solver , and that temperature data has been imported to Structural analysis , to find out the deformation.
I do just like your tutorial. Geometry, Mesh all done. But when i open the setup, it's error and text like this: " The FLUENT APPLICATION FAILED TO START". I have try to reinstall many time, change the folder to install but it won't work. Please help me with this error and many thanks for your tutor.
Have you installed the license file.
like density elasticity poissons ratio etc...
Can u plz provide question statement for this
Thank you so much for sharing good information.But I have a problem when I try to import cfd results file such as body temperature and pressure I get an error (an error occurred while trying to read the cfd results file please delete the load and try again ) this is the error I have got , please help me.
Regards
sometimes such type of error occurs due to software lag, i would recommend you to model it once again , and save it in a new folder.
Hi, in system coupling I have encountered this error: "Update failed for the Solution component in system coupling. The coupled update for system Static Structural threw an exception." Dou u have any idea about that problem?
There might be some unsaved changes or any warning in fluent, plz Check that.
I did the process of making all named selection as same as you, so went a run Fluent on boundary condition appear more zones and went i run the iniziation process a window says me that “Flow boundary zone found adjacent to Solid zone. This problem must be fixed before solution proceed” im using student versión ANSYS R1, thnks
have you created all the parts into a single part in Design modeler while creating the geometry ,as shown in Tutorial?
hello uploader, i have a quesn i was performing fsi on pipeflow(bifurcated) and during the static structural i imported pressure from my cfd model ,now while selecting for the CFD DOMAIN should i use the pipeinner wall or pipeouter wall or the wall as a whole? (p.s i am checking how much stress is generated in the inside portion of the pipe on whether it can withstand or not)
You should check on the inner wall
How many type of stresses include in equivalent stress like thermal and stress due to phase transformation
How about the effect of the thermal deformation? I mean that the flow field will changed because of the deformation of the pipes.
In that case , you need to do a 2 way FSI using a coupled system.
@@AnsysTutor I tried to do that but didn't because there is no option to transfer Displacment by thermal expansion from Strutural to Fluent.
Geometry and solution is not linking when i drag the static structural into the project schematic window...because of this imported load(A5) in static structural(B5) is not coming...plz help me
Geometry of A5 will be linked with B5 and simlilarly meshing, only the Setup of A5 will be linked with model of B5 for "import load" . watch the tutorial carefully.
my problem is solved...thank you so much
Most welcome:)
sir how do analyze one fluid body and three solid bodies to heat transfer in cfd?.is it possible?
Yes possible, it can be done like this, you need to create different solids bodies inside the fluid media, and assign the materials to it. Put the boundary conditions to the walls of the solid bodies if have any, put the flow velocity and solve. If you want to discuss more about this simulation with us, you can reach us at ansystutor7@gmail.com. We would try to clarify all your questions.
@@AnsysTutor thankyou for your reply sir
Please can you help me
How do we do this at abaqus ?
Sorry, have no experience of abaqus.
how to give property to the part?
Use engineering data table as shown in the tutorial.
plz its urgent