@@FrontiersInCFD sir currently I'm working in Open Channel CFD simulation can you please help me out to solve that problem!. It's my humble request sir..
what about moniters section in outline view...it is totaly different in 2024...all videos on youtube are old once and does not solve the required problem...please reply sir🙏🙏🙏🙏🙏🙏
i have this error when i try to intialize at 6:30 in video (Current data has not been saved, including solution data and any report files, animation files, etc. Do you want to discard the data and proceed with initialization?) ......... can you help me what to do ?
@@FrontiersInCFD Find the theoretical expression of the linear pressure losses through a round cross section pipe as a function of viscosity, low rate, diameter and length. Compare with your numerical results...sir how to find it? can you guide me actually I am learning software and i did this simulation and professor told me that you should do this and show me
If you have setup at your lab keep fixed rate of flow then measure the velocity and pressure at section (1) and section (2) apply bernoullis equation you can get the parameter experimentally and do check the same with numerical simulation
One of the best video in RUclips!!! For CFD simulation.
Sir please make CFD simulation on Open Channel also.
Thanks Will do
@@FrontiersInCFD sir currently I'm working in Open Channel CFD simulation can you please help me out to solve that problem!. It's my humble request sir..
wa.me/message/AAWWIVF5QK7OP1 for more details
You are genius bro
Awesome analysis..
Thanks
Thank you Sir great ❤
Most welcome
Thank you so much for your wonderful teaching.
Glad it was helpful!
Hi. Great video 👍. Could you please make the same simulation video with a crack in the pipe and its effects on the flow?
Will do
thanks its very helpful and i have a question. How can we find where is the fully developed laminar flow?
Check velocity contour and find reynolds number based on that
what about moniters section in outline view...it is totaly different in 2024...all videos on youtube are old once and does not solve the required problem...please reply sir🙏🙏🙏🙏🙏🙏
Share screenshot on frontiersincfd@gmail.com
Can you make a video of same thing in 2024 R1 version as they are very different and difficult to understand.
Ok will update
nice
Thanks
thanks sir G
Great
Can you explain why pathlines are unavailable in Solution?
select path lines from result section you can visualize
In the minute 5:08, how did you get to the next page?
Click on solution in workbench window
Please I need the details in the part (configuration)
Ok please connect on whatsapp
Jazakallah khair
i have this error when i try to intialize at 6:30 in video (Current data has not been saved, including solution data and any report files, animation files, etc.
Do you want to discard the data and proceed with initialization?) ......... can you help me what to do ?
Go to workbench window do the follow right click on setup-clear generated data - and reset..
Same way do for solution and result
Sir, Can you give me Numerical analysis of Turbulent flow through a circular pipe with heat transfer project? It would be helpful
Yes, sure
Connect with me on frontiersincfd@gmail.com
Thank you....Sir
While running result
Application failed to connect
Close solution window open only result window. If not clear generated data in result and try again
I have an issue, @5:12, here the red and blue arrow lines are shown but in my case , those are not showing
Which version of ansys you are using
@@FrontiersInCFD 2020R1
I think available in newer version or please check if you have specified inlet and outlet in mesh selection
@@FrontiersInCFD it worked sir , thank you for your support and guidance
can you make a video of flow simulation in perforated pipe? thank you
If possible can you share details of geometry for reference
Thankz a lot
sir how to validate it ?
numerically?
Generate Charts in Post Processor observe the parameter for example velocity or pressure and compare with experimental values
@@FrontiersInCFD Find the theoretical expression of the linear pressure losses through a round cross section pipe as a function of viscosity, low rate, diameter and length. Compare with your numerical results...sir how to find it? can you guide me actually I am learning software and i did this simulation and professor told me that you should do this and show me
you guide me ?
@@FrontiersInCFD you guide me ?
If you have setup at your lab keep fixed rate of flow then measure the velocity and pressure at section (1) and section (2) apply bernoullis equation you can get the parameter experimentally and do check the same with numerical simulation
after the solution is converged
x-coord
y-coord
this type of writtings are not coming.
Can you share image at frontiersincfd@gmail.com
@@FrontiersInCFD i have shared it via mail.
Can you send the shapes as PDF?
Diddnt get?
We have homework, I like your work very much, I need to present it to the teacher
Sir getting error while initialization that " flow boundary zone found adjacent to solid zone"
Define the solid and fluid zone properly
Sir journal plz
Didnt get ! Which journal?
Slowly teach sir
👍