I hv done the same in my Classic 350 bcoz my height is 5'11 feet and every tym when i ride i felt i m riding on a pony,but after this juggad i feel like a God,baaki sabkuch jo tum bole sahi bole ho, hum 400 me labour charge and the height rise dono lagwa liye
I am also planning to buy , same kind of suspension lowers from way2spped. to reduce the height by 1 inch of the bike. my height is 5.6 , i can not plant my feet firmly. i reshaped my seat to lower the height. after watching video i got few questions in my mind. a) bike balance with stock front suspension and rear way2speed lowers ? b) riding comfort with stock vs new lower height ? what will be your take on this setup.
Yes I've seen many people with this setup, haven't ridden it personally, but yes it'll work fine, to maintain the bike balance just adjust the preload at the back, make it stiffer, put it on level 2 or 3..
If u raise suspension height then aerogynaic get disturbing , interceptor fam for brake controling now it may be feel uncomfortable.as my experience may be
Yes bro, argonomics have changed slightly, a upright position, however due to low centre of gravity, bike feels planted and confident in handling and at high speed
Yes bro, its manageable, obviously there's a difference in suspension travel which you feel while going over deep potholes that the rear suspension bottoms out, but honestly and practically it's not causing any issue, I've got used to of it and it's quite stable
Hi Mr. Motonator, this is RAY. Tell me one thing, are these way2speed risers made of billet aluminum or are these forged aluminium?. And are the stock mountings steel or aluminum?. Reason being I don't wanna install a weaker mount.
Hello Ray, so these raisers are made of billet Aluminum, it's t7... stock ones are made of cast Aluminum.. hence it's way better quality than stock.. hope that helps 👍
Yes it can't stay on the centre stand anymore, due to increased ground clearance. I've extended the side stand for now. I put some risers like brick etc and then use the centre stand
Hmm, 2 years of RD by the blokes at RE UK means nothing? This kind of aftermarket stuff needs to undergo a lot of stress testing! I wouldn't risk after market parts when comes to critical components like suspension, engine or brakes - Yeah all cosmetic items are okay.
Maza aa gya bhai jo chej mjhe chaiye thaa wo samne h mere 1 barr ride chaiye merko apni Interceptor bnani h same
You should check Malle Rally Royale Support vehicle modification - for suspension part.. They are using RE 650..
Good work bro
interceptor to scrambler int awesome 🎊🎊🎉🎉💐🙏🏻
Thanks bro, it was my dream 😊🙌
Front and back ko milake total kitna cost hua? Im planning to do the same in my fz 25
Technically and mechanically I don't know but awesome
N this is my dream bike totally
Thanks, do check out the latest content.. 👍
I hv done the same in my Classic 350 bcoz my height is 5'11 feet and every tym when i ride i felt i m riding on a pony,but after this juggad i feel like a God,baaki sabkuch jo tum bole sahi bole ho, hum 400 me labour charge and the height rise dono lagwa liye
bro himalayan ka front suspenshion classic 350 mem direct fit hoga
Awesome lgi mujhe
Thanks bro 🙌
I am also planning to buy , same kind of suspension lowers from way2spped. to reduce the height by 1 inch of the bike. my height is 5.6 , i can not plant my feet firmly. i reshaped my seat to lower the height. after watching video i got few questions in my mind. a) bike balance with stock front suspension and rear way2speed lowers ? b) riding comfort with stock vs new lower height ?
what will be your take on this setup.
Yes I've seen many people with this setup, haven't ridden it personally, but yes it'll work fine, to maintain the bike balance just adjust the preload at the back, make it stiffer, put it on level 2 or 3..
If u raise suspension height then aerogynaic get disturbing , interceptor fam for brake controling now it may be feel uncomfortable.as my experience may be
Yes bro, argonomics have changed slightly, a upright position, however due to low centre of gravity, bike feels planted and confident in handling and at high speed
@@MrMotonator i hav the same bike and its reaching 176kmph top speed
Great to know that, I've tested mine till 165 with this suspension setup, it felt confident.
Keep up the good work🙌
Thank you so much bro, stay connected 🙌👍
Awesome looks
Very good video, bro. Is the suspension behaviour of the front and rear different or they go well together?
Yes bro, its manageable, obviously there's a difference in suspension travel which you feel while going over deep potholes that the rear suspension bottoms out, but honestly and practically it's not causing any issue, I've got used to of it and it's quite stable
Super ji
Hi Mr. Motonator, this is RAY. Tell me one thing, are these way2speed risers made of billet aluminum or are these forged aluminium?. And are the stock mountings steel or aluminum?. Reason being I don't wanna install a weaker mount.
Hello Ray, so these raisers are made of billet Aluminum, it's t7... stock ones are made of cast Aluminum.. hence it's way better quality than stock.. hope that helps 👍
Bro is any warrenty problem??
When i fix it into a new bike
Bro I don't think so.. but according to rules it can cause warranty problems however practically it doesn't matter
Bhai is upgradation se kya ham gt me underseat exhaust laga sakte hain
Shayad possible nahi ho payega
How is this suspension riser after one year? Any problems with the material? Has it stood up to all the road conditions you've thrown at it?
It's working fine, no complaints as such
Change to scrambler exhausts.. it’ll look killa!!!
Is there any problem in putting bike on Double stand, I think you have kept any rise below stand.
Yes it can't stay on the centre stand anymore, due to increased ground clearance. I've extended the side stand for now. I put some risers like brick etc and then use the centre stand
Awesome .....🔥
Thanks bro, stay connected 👍
Where can I buy these risers?
Same here bro, i also need tooo
Way2speed, contact them on insta.. but I think they are out of stock for now
Plz show some offroading on it
Sure bro, my bike's tyres almost worn-out, that too stock perellis, looking for some good dual purpose tyres, but will definitely upload some soon. 👍
front suspenshion konsa bike ka hai
Himalayan
👍👍👍
Is this avilable in less size to lower it.
Yes check with way2speed
Can you tell me the name of the workshop and how much did it cost fitting charge ?
Don't remember the name actually, it's the RK Puram sec 1 bike market in New Delhi, they charged me INR 300.
Okay thank you bro . Your bike looks damn good especially the colour.
❤️
Amazing mod, but the wrap with brown touch looks horrible. Please change back to original look. I think this bike will then look kick ass
Thanks for the suggestion, I've already changed it.. check it out on Insta
Suspensions hard कर लिया भाई तुम ने
Han bhai karwana zaruri tha 😅 comment badiya laga tumhara bhai 👍
Bhai Himalayan hi le lete! kya dikkat thi?
Bhai power itni nahi thi usme
Where we can get the rear suspension raisers? and prices?
I got it from way2speed, you can contact them on Instagram, got it for INR 2800
hi where to get this?
Contact way2speed, their instagram link
instagram.com/way2speed?igshid=ba3l18bzca1t
Hmm, 2 years of RD by the blokes at RE UK means nothing? This kind of aftermarket stuff needs to undergo a lot of stress testing! I wouldn't risk after market parts when comes to critical components like suspension, engine or brakes - Yeah all cosmetic items are okay.
Didn't aware of this