Great products!!! For even more hydrophobicity. I mix two squirt of bathe+ to an 200ml spray bottle. After washing im using it as an second pass for every panel. Lasts for weeks as a stand alone product even if washed with strong prewash foams such as Bilt Hamber Auto foam and regular Bathe essence between Bathe+ washes. When does Gyeon Restart will be avaible in Finland for comsumers. Really would see it as a good soap in my arsenal for winter as sealants start to clogg from roadsalt and grime.
@@dtail9638 i do have a foamcannon. But a 1/10 pre mixed solution to a foam cannon comes out roughly at 1% strenght that is equal to 1/100. 50/50 soap and water dilution would only come out as 4-5% strenght. A mercedes c- class would need around 200-300ml of premixed solution in a foam lance. So around 100-150ml of bathe+ to get a 5% strenght out of a lance. I put 20ml of this gorgeous elixir to my 200ml little hairsprayer bottle to get 10% strenght and i can spray every panel with control and wipe it with a clean microfiber mitt to layer it perfectly, get protection for weeks. 😎
I got WetCoat to use for a few weeks before I could polish and apply Mohs on our new car. It works wonders.. Mohs, Cure, & WetCoat and I'm set for some time.
Great video Yves, when you are applying bathe+ using the wash mitt method would you be using bathe to wash the car and how many panels can you do before you need to apply more product to your wash mitt. Keep the videos coming they are so informative and great to watch
I would use Bath or Restart Wash. You will be surprised how many panels you can do. Do one at the time and rinse. You will be able to do half of a car with four “bottle flip dots” on your wash mitt. Massage them in your mitt with your hands! Thanks for the positive comment. More video’s in the works. A happy and healty 2021! Regards, Y.
@@GYEON_official Thanks for the quick reply as I dont have a coated car I will have to use bathe as restart is more for coated cars. When you say bottle flip dots is that 4 pumps of the pump sprayer. Can bathe+ be used on wax protected cars ??? Thanks for your help. Chow
Exactly, 4 pumps is about the same. I would not suggest to use it on waxed cars (carnauba wax). It will not have the same performance because the initial bounding is not how it should be. Of course it will work but not as intended. Good luck! Regards, Y.
@@GYEON_official thats what I thought but nice to have it confirmed so I guess it would work over sealants or even your new Gyeon wax as this is hybrid wax. Really looking forward to getting hold of this when it hits the UK market.
Many variables can influence the final outcome but if you haven’t tried Q²M Bath+ in a foam gun, you might be surprised. Q²M Wetcoat well applied is the easiest for everybody, also for those who haven’t a foam gun. It’s more about giving people choices and/or preferences. Regards, Y.
Yes You can, and it works VERY well! I use it on almost all customer cars, if they dont have wax or coating on the car. Amazing hydrophobicity and gloss 👍
Yes you can use it on matte wrapped cars but make sure you spray it consisent and in a light mist, no need to overuse or speay at close range. I gave some tips in a previous video. Regards, Y.
How come my bathe+ is yellow? Mine also doesn't bead like that, I got it from a Canadian supplier, good product it just seems different if you can explain
Q²M Bathe+ was able to be found in blue, yellow or even green - that was due to new regulation on the colorant additive we’ve been using - now it will stick to dark blue 👍🏻 with that said, it never had any influence on the performance of the product - make sure to store it correctly. We would advise you to check the hardness of your water in your area, it can have massive impact on all your detailing product performance.
You can, but it is slight overkill! Better combos are Bathe/Bathe Essence & WetCoat or Bathe+ and Cure or the all new Ceramic Detailer. Regards, Jeremy.
can't really beat these products, they work great, when used correctly. very handy for winter cleaning ❄🌨❄
Yes yes keep the episodes going pleaseeee
Im loving these videos. I just wished it was easier to buy Gyeon in Australia.
Car care products mate 👍
Great products!!! For even more hydrophobicity. I mix two squirt of bathe+ to an 200ml spray bottle. After washing im using it as an second pass for every panel. Lasts for weeks as a stand alone product even if washed with strong prewash foams such as Bilt Hamber Auto foam and regular Bathe essence between Bathe+ washes. When does Gyeon Restart will be avaible in Finland for comsumers. Really would see it as a good soap in my arsenal for winter as sealants start to clogg from roadsalt and grime.
Great how you do it! And very efficient and durable! But when you have a foam gun, there is another to do it 😉.
@@dtail9638 i do have a foamcannon. But a 1/10 pre mixed solution to a foam cannon comes out roughly at 1% strenght that is equal to 1/100. 50/50 soap and water dilution would only come out as 4-5% strenght. A mercedes c- class would need around 200-300ml of premixed solution in a foam lance. So around 100-150ml of bathe+ to get a 5% strenght out of a lance. I put 20ml of this gorgeous elixir to my 200ml little hairsprayer bottle to get 10% strenght and i can spray every panel with control and wipe it with a clean microfiber mitt to layer it perfectly, get protection for weeks. 😎
@@Samppaze I’ve been applying via Lance for years, it works fine. You only need 10ml in the Lance. Try it on a bare car 👍
Man I love gyeon products so much.... I get happy just seeing the products ☺
Great episode again, congratz!
I got WetCoat to use for a few weeks before I could polish and apply Mohs on our new car. It works wonders.. Mohs, Cure, & WetCoat and I'm set for some time.
Love Wetcoat in the Winter.
Great video Yves, when you are applying bathe+ using the wash mitt method would you be using bathe to wash the car and how many panels can you do before you need to apply more product to your wash mitt.
Keep the videos coming they are so informative and great to watch
I would use Bath or Restart Wash. You will be surprised how many panels you can do. Do one at the time and rinse. You will be able to do half of a car with four “bottle flip dots” on your wash mitt. Massage them in your mitt with your hands!
Thanks for the positive comment. More video’s in the works.
A happy and healty 2021!
Regards,
Y.
@@GYEON_official Thanks for the quick reply as I dont have a coated car I will have to use bathe as restart is more for coated cars.
When you say bottle flip dots is that 4 pumps of the pump sprayer.
Can bathe+ be used on wax protected cars ???
Thanks for your help.
Chow
Exactly, 4 pumps is about the same. I would not suggest to use it on waxed cars (carnauba wax). It will not have the same performance because the initial bounding is not how it should be. Of course it will work but not as intended. Good luck!
Regards,
Y.
@@GYEON_official thats what I thought but nice to have it confirmed so I guess it would work over sealants or even your new Gyeon wax as this is hybrid wax.
Really looking forward to getting hold of this when it hits the UK market.
Really enjoying these.
I'm bout to buy myself a G hat. an Amazing video. Not to big on suds as long as the car get's clean.
Yeah well, You said it. As long as the car gets clean! Definetely the most important thing 😂
I currently use gyeon wetcoat, does bath+ give the same performance/durability etc ? Or for best results first wash with bath+ then apply wetcoat?
Many variables can influence the final outcome but if you haven’t tried Q²M Bath+ in a foam gun, you might be surprised.
Q²M Wetcoat well applied is the easiest for everybody, also for those who haven’t a foam gun. It’s more about giving people choices and/or preferences.
Regards,
Y.
Can you apply bath+ via foam lance?
Yes You can, and it works VERY well! I use it on almost all customer cars, if they dont have wax or coating on the car. Amazing hydrophobicity and gloss 👍
Yess. Works well
do you have when you add product by hand, using every time 3 pumps in your washmitt?
You will do more then one panel with 3 pumps. 😉. Try it and you will be amazed ✌🏻
Can this product use on ceramic coated vehicle ?
Absolutely!
Regards,
Y.
Hi Yves, does Wet Coat able to use on matte wrapped car? Any gloss enhancers in there? Thanks in advance! :)
Hi Yves, looking forward to your reply! :)
Yes you can use it on matte wrapped cars but make sure you spray it consisent and in a light mist, no need to overuse or speay at close range. I gave some tips in a previous video.
Regards,
Y.
@@GYEON_official Hi Yves, thank you for your reply. Will do. Thank you! :)
How come my bathe+ is yellow? Mine also doesn't bead like that, I got it from a Canadian supplier, good product it just seems different if you can explain
Q²M Bathe+ was able to be found in blue, yellow or even green - that was due to new regulation on the colorant additive we’ve been using - now it will stick to dark blue 👍🏻 with that said, it never had any influence on the performance of the product - make sure to store it correctly. We would advise you to check the hardness of your water in your area, it can have massive impact on all your detailing product performance.
Can you combine using bath+ via lance and wet coat?
This would be overkill and not needed at all.
Bath+ in a foamlance is amazing.
Regards,
Y.
@@GYEON_official I have a graphene coating. So wet coat would do a good enough job of maintaining on its own?
Can you use bathe+ and wetcoat at the same time ?
You can, but it is slight overkill! Better combos are Bathe/Bathe Essence & WetCoat or Bathe+ and Cure or the all new Ceramic Detailer. Regards, Jeremy.
@@GYEON_official All right! noted thank you
You should get a Guru in these videos
They were all busy 😁
yes yes
Great guy and another great episode. #ILIKETOGMYCAR@HOME, truly my fave brand, hats off.
Love all the products. But camera man could do better.
Gyeon should stick to coatings, not this crap...
;)
Thanks for your feedback - agree to disagree 👍🏻