I really enjoy watching these videos. I like how you show all the products and how they are used, even better when you show the alternate options that could be used. Keep up the great work. Thanks
Your the only detailer that won’t use brushes on the exterior , I understand why as I got black chrome painted alloys and the brushes swirled them up and they would do the same to the panels
Taking the wheels off to clean the wheel arches is not really possible for me. The wheels get prepared when I change over from summer to winter tyres with a tyre fitting shop, I don't change them myself. It would be useful to see a video of how to clean arches with the wheels on the car. You recommend two coats of fall out remover on the car, first underneath the foam which is washed off before applying again and washing with the mitt and shampoo?
Another really good episode. Is there a reason you didn't use the ceramic detailer as a drying aid or is this because you had already added some protection in the way of bathe+. Already looking forward to the next one.
I love the idea of using bathe+ in snowgun. Do you have any suggestions for using the solution in a pressure bottle? can it be even done? should the dilution be like 50ml to 1l?
I dig Wet Coat. I use it on my wheels. Why don’t you use detail brushes to get into tight places? They seem to be a better and easier option. Great video please send me some more Wet Coat thanks😃
Great episode! I have Q2 wax, Wetcoat, ceramic detailer, cure and bathe +. Can you please help me with the right order of how, when and in which order to use them. I am a bit confused about the order and timing. Thanks
There are many combinations possible but stick to the basic ones. There are many videos available on how to use the products. And this will help you as well: gyeonservices.com/en/maintenance Regards, Y.
Bathe+ when you wash. You can use ceramic Detailer as you want but in general cure goes on top of a ceramic coating once every 3 months as a touch up or refresher and ceramic Detailer would be used in weekly or biweekly maintenance washes. Normally i would use q2 wax or a ceramic coating. Q2 wax applied every 2-4 months depending on climate, conditions, and where you store it. You could use cure or q2 wax at the and interval, just depends on what product is meeting your needs. I never use wet coat but it see its validity and merit. Say you applied q2 wax at the beginning of the quarter, you could use wet coat as a monthly topper. Hope this helps.
Well, I would say that’s pretty strong, first off all because of how ease it is to apply versus the performance you get out of it. Some foams are very strong and this can be good but also has downsides. It’s not the first time I see rubbers loose their looks and performance after so called strong foam products. Regards, Y.
Yves don’t ever recommend to use brushes on any painted surface or chrome , piano black trim , gloss black trims etc and that’s why he uses microfibre and a plastic card to clean gaps and the grill
If using bathe plus out of a foam cannon this way, can quick detailer still be used as drying aid or is it an either or like the wet coat when using the plus?
When ever I use Gyeon Wet Coat I get streaks and marks on the paintwork. My car is detailed and treated with Can Coat topped off with Gyeon wax. It looks amazing until I use Wet Coat following a wash then it looks terrible. Streaks and marks and it any gets on the side windows it looks shocking. What am I doing wrong ? I have now gave up trying with the product 😩 I now need to spend loads of time trying to remove the streaks which isn’t easy especially on the side windows.
Less is more! 2 to 3 sprays by panel is more than enough. Make sure to rinse heavily. For people having streaking issue, we would recommend to spray on the panel and spread with a dedicated wash mitt prior to rinsing.
I really enjoy watching these videos. I like how you show all the products and how they are used, even better when you show the alternate options that could be used. Keep up the great work. Thanks
Your the only detailer that won’t use brushes on the exterior , I understand why as I got black chrome painted alloys and the brushes swirled them up and they would do the same to the panels
Exactly. They are good for engine and some other parts but not on nice paint.
Regards,
Y.
@@GYEON_official thanks for the videos , I learned a lot from you
amazing job
I'd love to see a video showing bath+ used in a foam gun.... Seems like an awesome idea!
Taking the wheels off to clean the wheel arches is not really possible for me. The wheels get prepared when I change over from summer to winter tyres with a tyre fitting shop, I don't change them myself. It would be useful to see a video of how to clean arches with the wheels on the car. You recommend two coats of fall out remover on the car, first underneath the foam which is washed off before applying again and washing with the mitt and shampoo?
I like gyeon product 👍
But i like wash my car with Rinseless wash.
Expect one day Gyeon will make product for this new method 🤞
Great video again, how much Bathe+ did you put in the 1 litre foam cannon bottle?
I used between 20-30ml for a 500ml final solution.
Regards,
Y.
@@GYEON_official thanks for the reply, I'll give it a try next time I clean my car.
Another really good episode.
Is there a reason you didn't use the ceramic detailer as a drying aid or is this because you had already added some protection in the way of bathe+.
Already looking forward to the next one.
You can use both CeramicDetailer or QuickDetailer, it has not bad influence in both cases.
T
Reasonable and functional procedure indeed!
Would it be possible to then apply a vax over the Q2M Bath / Wetcoat?
Yes but it would be a bit overkill.
Regards,
Y.
I love the idea of using bathe+ in snowgun.
Do you have any suggestions for using the solution in a pressure bottle? can it be even done? should the dilution be like 50ml to 1l?
Gyeon 👍👍👍
I dig Wet Coat. I use it on my wheels. Why don’t you use detail brushes to get into tight places? They seem to be a better and easier option. Great video please send me some more Wet Coat thanks😃
Using ceramic or quick detailer as a drying aid, is there a risk of high spots? Do you need to buff with a MF after? Thanks! Great video
No risks for high spots. A final pass with a fresh Q²M Softwipe is always a good choice.
Regards,
Y.
Great episode! I have Q2 wax, Wetcoat, ceramic detailer, cure and bathe +. Can you please help me with the right order of how, when and in which order to use them. I am a bit confused about the order and timing. Thanks
There are many combinations possible but stick to the basic ones. There are many videos available on how to use the products.
And this will help you as well:
gyeonservices.com/en/maintenance
Regards,
Y.
Bathe+ when you wash. You can use ceramic Detailer as you want but in general cure goes on top of a ceramic coating once every 3 months as a touch up or refresher and ceramic Detailer would be used in weekly or biweekly maintenance washes.
Normally i would use q2 wax or a ceramic coating. Q2 wax applied every 2-4 months depending on climate, conditions, and where you store it.
You could use cure or q2 wax at the and interval, just depends on what product is meeting your needs.
I never use wet coat but it see its validity and merit. Say you applied q2 wax at the beginning of the quarter, you could use wet coat as a monthly topper.
Hope this helps.
Wet coat is cool but only lasted a couple of weeks for me . One wash with bh auto foam and it was gone .
Well, I would say that’s pretty strong, first off all because of how ease it is to apply versus the performance you get out of it.
Some foams are very strong and this can be good but also has downsides. It’s not the first time I see rubbers loose their looks and performance after so called strong foam products.
Regards,
Y.
Ooooh thank you!!!
Добрый! Возможно ли после нанесения Q2 WAX использовать шампунь Bathe+ и усилитель гидрофобных свойств по влажной поверхности WetCoat? Спасибо!
what was the tool that was used with the microfibre towel
Any type of card (identity card, bank card, …)
Yves don’t ever recommend to use brushes on any painted surface or chrome , piano black trim , gloss black trims etc and that’s why he uses microfibre and a plastic card to clean gaps and the grill
If using bathe plus out of a foam cannon this way, can quick detailer still be used as drying aid or is it an either or like the wet coat when using the plus?
Sure it can! It’s always good to reduce as much friction as possible to prevent scratching your paint.
Regards,
Y.
Hi,
Just wondering what product was that being sprayed on the rear registration plate as it didn't look like bug and grime .
Thanks
We used Q²M APC diluted 1:5 for all the crevices cleaning.
Regards,
Y.
@@GYEON_official Thanks for the rapid response 👍
Can I use bug & grime on panel covered with ppf? Thanks
Yes. Works perfect.
Regards,
Y.
When ever I use Gyeon Wet Coat I get streaks and marks on the paintwork. My car is detailed and treated with Can Coat topped off with Gyeon wax. It looks amazing until I use Wet Coat following a wash then it looks terrible. Streaks and marks and it any gets on the side windows it looks shocking. What am I doing wrong ? I have now gave up trying with the product 😩
I now need to spend loads of time trying to remove the streaks which isn’t easy especially on the side windows.
Less is more!
2 to 3 sprays by panel is more than enough.
Make sure to rinse heavily.
For people having streaking issue, we would recommend to spray on the panel and spread with a dedicated wash mitt prior to rinsing.
@@GYEON_official Thanks 😊 I will try this to se if things improve.
Can APC be used for door shuts ?
Yes of course, just use it diluted. From 1-5 to 1-15 depending the job.
Regards,
Y.
Why is it called "detail" and not just "wash"?
Because there is quite a difference between a simple wash and an exterior detail, as for example the removal the wheels, cleaning arches, and so on.
1st
first
what is the brand of the piston water gun?
It’s a Karcher.
Regards,
Y.