Removing and cleaning Print-Head Epson inkjet XP WP

Поделиться
HTML-код
  • Опубликовано: 29 сен 2024
  • How to remove and clean the printhead of an Epson inkjet printer XP, WP and similar models. How to clean the nozzles.
    How to clean the Epson print-head with a damp cloth:
    • Simple way to clean th...
    Printing a nozzle test:
    • Epson WF-2010 How to c... )
    For any question or suggestion leave a comment.
    - Activate the CC Subtitles in your language -
    email: link.accessori@libero.it
    other links:
    www.emmegiricam...

Комментарии • 22

  • @PaoloMarcelli
    @PaoloMarcelli 6 месяцев назад

    Ti devo dei ringraziamenti! Di recente al lavoro siamo stati contattati da un cliente a circa 4 ore di viaggio da noi, che ha installato un nuovo toner giallo su una Brother MFC-L9577CDW, il toner non è stato riconosciuto come nuovo, probabilmente non ha "sentito" l'attuazione del sensore ottico di nuovo toner, fargli smontare la cartuccia e resettare la posizione dell'ingranaggio per telefono ovviamente non era un'opzione, ho trovato quel video sulla procedura di reset con i tasti X e Indietro e glie l'ho fatta fare. Cliente contento e non abbiamo perso una giornata di viaggio per andare lì 🤣

  • @jakotelsa
    @jakotelsa 6 месяцев назад +1

    Question. Can I use warm isopropil alcohol instead of warm water?

    • @viandant5
      @viandant5  6 месяцев назад

      alcohol does not c,lean very well the water based inks

    • @jakotelsa
      @jakotelsa 6 месяцев назад

      @@viandant5 isopropyl alcohol may damage the head?
      So. Distilled warm water should be the suitable thing to clean??

    • @viandant5
      @viandant5  6 месяцев назад +2

      @@jakotelsa Alcohol is harsh, there is the risk that it could damage the print-head however water it's better to dissolve water based dried inks

    • @jakotelsa
      @jakotelsa 6 месяцев назад +1

      @@viandant5 thanks a lot. i have been using a mix of 50% isopropyl alcohol and 50% warm distilled water for years and still no damage to HP cartdrige printing heads. I Will use just distilled warm water since now

  • @AlexBolzani-o9u
    @AlexBolzani-o9u 6 месяцев назад

    bello

  • @guti-qe8ng
    @guti-qe8ng 5 месяцев назад

    idk..what happened but after doing some printing suddenly my printer say unrecognized ink cartridge🤷🏻...i am sure it's compatible...

    • @viandant5
      @viandant5  5 месяцев назад

      I think you have to remove and reinstall the print-head. may be a connector or a cable is not correctly inserted

  • @venditascacchi1845
    @venditascacchi1845 Месяц назад

    Ciao, ho lo stesso problema sulla EPSON Eco TANK ET-2550, hai la tessa procedura anche per questo modello?

    • @viandant5
      @viandant5  Месяц назад

      Se ricordo bene no, le Ecotank non hanno le cartucce

  • @norieroseleornas9773
    @norieroseleornas9773 2 месяца назад

    Do you have for epson stylus sx425w?

    • @viandant5
      @viandant5  2 месяца назад

      No, I have no instructions

  • @ammarnahhal418
    @ammarnahhal418 3 месяца назад

    After I cleaned the print head and completely dried it, and running several cleaning cycles, no ink is showing on the paper, before cleaning it was printing but some lines are missing but after cleaning no ink is coming out from the print head

    • @viandant5
      @viandant5  3 месяца назад

      i think you let the print head too much out of the printer

    • @ammarnahhal418
      @ammarnahhal418 3 месяца назад

      No, the cleaning process took in total with drying just 20 minutes, is it possible that because I blow only air using the inject needle for drying?

    • @viandant5
      @viandant5  3 месяца назад

      @@ammarnahhal418 May be, however you can try to remove again the printhaed, put only the nozzles in warm water then after a few minutes insert it into the printer

  • @pcnoproblem
    @pcnoproblem 6 месяцев назад

    Molto interessante

  • @ionoi1421
    @ionoi1421 6 месяцев назад

    Ciao,
    mi succede una cosa strana, nonostante ho impostato i sottotitoli tradotti in automatico in italiano continuano a essere visualizzati in inglese.

    • @viandant5
      @viandant5  6 месяцев назад +1

      Li devo ancora mettere, lo faccio stamattina

    • @ionoi1421
      @ionoi1421 6 месяцев назад +1

      @@viandant5 Grazie.