Rick wrenchin,skooby huntin,tatro coachin. I could watch this all night. I know how much work goes into uploading these video's....I just want to say thank you Tatro. I am so much more confident work in on my bowling balls now a.k.a amf's
I've grown up in backyard shade tree shops and been running these bikes since my 82 sporty, you can't have a more forgiving machine to learn on than a harley, they run with rods knocking valves not sealing and lack of oil so if burning up some pawls and seals is all that happens it's all good change em and run that shit till it blows and do it again
That’s probably why I’ve found that so many of the dipsticks are broken off. Is because the cable doesn’t run straight and wears the end of the stick off over time. I’ve probably found 50 of them broken off about where the cable would ride..
Ah, the joys of being a trainer! Viewers take note, when learning from those far more skilled than you are, don't assume your "way" is the best way even if it may work. Do study tech data first, in this case the appropriate service manual, but know that's a starting point. Every mechanic should learn different types of wear and what causes them. Learn to LISTEN and you'll learn much more. I've trained many aircraft mechanics and technicians and been trained by some excellent motorcycle and auto mechanics, machinists and weldors. I find Tatro's videos very fucking useful. BTW viewers should remember RUclips videos are not a substitute for tech data and study. If you own a Harley get the factory (NOT Haynes/Clymer/Chilton/etc) service manual AND the factory parts catalog whose exploded views supplement the manual. Those books are one thing HD does very well. Also learn to use internet forums for detailed info. RUclips does not substitute for forums. They're complementary. Learn HOW to learn. Knowledge is power.
all that is nice if you want to be stock. everything changes when you want to go fast. learning what works and why is what you need to do. yes, knowledge is power. tatro
Maybe get a couple of the old desk work lamps that are on a movable arm an mount one on each side of your work stations then you could just mount your phone or camera to it an adjust it easily an have 2 hands to work js they work great love the videos
I love these videos I banged a gear up on my 103 Street Bob so im rebuilding my tranny and i dont like bumming bears after paying a spendie repair bill.So wish me luck on my rebuild.Well wishes bikers
This was a great video. Would like to see more of I could make only one suggestion. Especially nubes like me. Say something like if that final gear is not seated all the way incase like my two stayed on the stem and not the case that you must set the damed thing or gears will not rotate. I believe that would help alot of people. However very entertaining and educational video.
Tatro I admire your patience with the bearded clam /5spd rebuild hope you still charged him full price for using your tools and misplacing them ;;I'm waiting to see future episode when it comes back in for another rebuild you would have had that done in 45 mins but vid was still very knowledgeable cheers
I dipped my tongue into a thimble of whiskey everytime the guy filming touched something more than once.....when he didn't need to.....and I'm drunk AF a third way through the video. Must be doing some good blow....or the worst case of OCD I have seen......
YEAAA FOR RICK!!! HE IS MY FAVORITE TATO EMPLOYEE . HE IS HUMBLE AND FAIRLY COMPETENT/KNOLEDGABLE. A REEL ASSET TO THE TATO MACHINE FAMILY! TELL RICK IM COMING FOR HIS JOB!!! HAHAHA I'VE BEEN WATCHIN FOR A FEW MONTHS, AND HAVE DECIDED TO DO A 1000 MILER TO COME SEE YOU GUYS AND PROB GET SOME PARTS. SOMETIME THIS SPRING. YOU GUYS KEEP UP THE GOOD WORK!! SEE YA SOON GUYS !! SAXXX ( CHAD J BAGLEY)
TATRO SORRY MAN DON'T KNOW HOW THAT GOT PASSED ME. IM NOT THE GREATEST SPELLER. HA HA AS YOU CAN SEE. BUY THE WAY MAN THANKS FOR TAKING THE TIME TO DO THESE VIDS A LOT OF WORK FOR A GUY THAT PROBABLY WORKS WAY MORE THAN HE RIDES!! WHEN I GET OUT THERE WERE GOIN FOR A RIDE ,, I'LL BRING MY CAM SO THE FANS CAN GET A GLIMPS OF YA'LL RIDIN WITH SMILES ON YOUR MUGS!! HAHA---HA
Question if you pull the lip out the case removing the main shaft gear out the bearing on this same trans it the case junk or can it be reused? Does the lip have to be welded back in or will it work with out it?
? Will there be a FOLLOW-UP ? Did it "run" / operate ? Did it LEAK ? Did the RevTech / CCI 6-Speed Clutch Cover end up working ( or NOT) ? I'm subscribed & NOTICES are "on" !!! Be sure to let us know how this BUILT turned out on the BIKE ! COOP ..............................................
just relax bro, ignore the camera... lol It's hard to ignore the camera operator---LOL It's nice to have him around though, isn't it?? I love all the videos and someday I hope to drop in and say hello to all and maybe spend some government ssi money.....
I gotta question for ya if you dont mind I got a 90 tourglide I beat the absolute shit out of this poor thing somehow could even think why but my dipstick to my trans said fuck you and broke off into my trans any reason u could think this would happen ? It's only aluminum so it didnt lock up or nothing never even realized it until I went to service my bike and well yea she still gets right along little round if the trans of course I just put all new seals in primary side of the trans because I was already bc I broke the belt lmao but that helped a whole lot I had mostly all the seals blown never really sealed but never really leaked mainly just seeping but it's a old evo probably never had any seals replaced in it got all sorts of performance shit s&s, dyna 2000i igniting havnt broke into the motor yet almost positive it's got a ev27 cam its s bagger cam she will get up and go thatscor damn sure shes a beast she will run eirh the big dogs just fine
28 minutes in and its painful to watch. Rick is like, "DUDE, I know what I'm doing!" While Tatro is just trying to get Rick to finesse this build... lol, who would you want to help you through this or any rebuild? Attention to detail gets my vote.
Tatro Machine that’s what I’m doing with mine, will I be able to get it back together? Idk but I’ll just keep chipping at it. Getting the clutch hub off my 89 was a nightmare.
Thats a fact....or someone needs to make.an informative video without the bickering snatching and grabbing and throwing parts maybe? Either way its a bad situation! Merry Christmas 🎅!
,With all the nice equipment and tools you have in your shop I am surprised that you don,t have and use the proper bearing tools for rebuilding Harley transmissions. Any good mechanic knows that you press or support against the inner race so you don,t stress or distort the bearing. How long do you really think those bearings are going to last? (Not long) Especially those trap door bearings after beating them back and fourth with a hammer. They are junk now.. I see the vid is over three years old. Just curious how long it was before it was back in your shop. Do charge them second time to fix your fuck? Do you charge them for all that fumbling time in the vid? If so shame on you.. I h
maybe you should keep your comments to yourself and not pick on your elders that are not quite all there anymore. he was payng his dues way before your were born. tatro
Rick is working on his own bike not paying some one an learning from a old school guy that not many of them left i woud love to meet a guy like tatro thats willing to share what he knows about H-D
Okay, i appreciate most shops that provide video's, here's the problem, i have checked a few of yours, the camera is always on the dog, the mechanics arm or the footrest when it should be on the job. way too much fast swinging around. leaves lots to the imagination, very little concentration on actually showing how the jobs are done and more on chasing around lie you'd rather not be doing the video but just doing it because you've got nothing else to do and you're gonna be glad when it's over. Sorry, got to find one of the others that puts the viewers interest ahead of their own. thx anyway.
you sure complain alot for getting this for free. the customer is paying the bill, not you. the customer is first and the videos are what you get. if you want to pay for the job and the production company to do the videos that you will get what you want. tatro
🤣🤣🖕 Idiot complains because this is how a real down home shop works. It doesn't have production value and some bullshit edm bargain value music playing in the background. BYE GUY!
Авто/Мото
Rick wrenchin,skooby huntin,tatro coachin. I could watch this all night. I know how much work goes into uploading these video's....I just want to say thank you Tatro. I am so much more confident work in on my bowling balls now a.k.a amf's
keep it up.
tatro
This is better than any comedy special I've ever seen
I've grown up in backyard shade tree shops and been running these bikes since my 82 sporty, you can't have a more forgiving machine to learn on than a harley, they run with rods knocking valves not sealing and lack of oil so if burning up some pawls and seals is all that happens it's all good change em and run that shit till it blows and do it again
Couldn't of said it better.
Watching this I felt like I was back working with my Dad 😀
Poor Rick leaking everywhere. Would love to hear some of his stories of road side repairs. Never though of using grass blades as temp gasket
Tatro: Rick what are you doing?
Rick: It's hammer time!
Good to see a video with Scooby, he was a great pup.
yes he was and he is in lots of them. look for the rat videos.
tatro
I appreciate the knowledge taken from this video. Well worth the price I paid for it.
free or nothing.
tatro
@@TatroMachine free is for me
I am so impressde by the ammount of inventory you got in your shop tatro.. and you seem to know where shit is :p
can't do any work if you have to stop all the time to get parts.
tatro
I think I'm actually more confused on how to do it but entertaining anyway.
That’s probably why I’ve found that so many of the dipsticks are broken off. Is because the cable doesn’t run straight and wears the end of the stick off over time. I’ve probably found 50 of them broken off about where the cable would ride..
Ah, the joys of being a trainer! Viewers take note, when learning from those far more skilled than you are, don't assume your "way" is the best way even if it may work. Do study tech data first, in this case the appropriate service manual, but know that's a starting point. Every mechanic should learn different types of wear and what causes them. Learn to LISTEN and you'll learn much more. I've trained many aircraft mechanics and technicians and been trained by some excellent motorcycle and auto mechanics, machinists and weldors. I find Tatro's videos very fucking useful. BTW viewers should remember RUclips videos are not a substitute for tech data and study. If you own a Harley get the factory (NOT Haynes/Clymer/Chilton/etc) service manual AND the factory parts catalog whose exploded views supplement the manual. Those books are one thing HD does very well. Also learn to use internet forums for detailed info. RUclips does not substitute for forums. They're complementary. Learn HOW to learn. Knowledge is power.
all that is nice if you want to be stock. everything changes when you want to go fast. learning what works and why is what you need to do. yes, knowledge is power.
tatro
Challenge accepted. Ne wto the HD
"Your time is free cause you ain't worth a shit."-priceless.
You're like a squirrel with his nut's. You know what you have and where it's at.
You Sir are a Motorcycle Wizzard..
Lol now this is a real hammer mechanic :P
Great video! Rick had me pissing my pants 😂
Maybe get a couple of the old desk work lamps that are on a movable arm an mount one on each side of your work stations then you could just mount your phone or camera to it an adjust it easily an have 2 hands to work js they work great love the videos
If it wasn't for Rick, Tatro would make rebuilding a 5-speed look easy, the pair of them remind me of Statler and Waldorf.
I love these videos I banged a gear up on my 103 Street Bob so im rebuilding my tranny and i dont like bumming bears after paying a spendie repair bill.So wish me luck on my rebuild.Well wishes bikers
This was a great video. Would like to see more of I could make only one suggestion. Especially nubes like me. Say something like if that final gear is not seated all the way incase like my two stayed on the stem and not the case that you must set the damed thing or gears will not rotate. I believe that would help alot of people. However very entertaining and educational video.
Tatro I admire your patience with the bearded clam /5spd rebuild hope you still charged him full price for using your tools and misplacing them ;;I'm waiting to see future episode when it comes back in for another rebuild you would have had that done in 45 mins but vid was still very knowledgeable cheers
@ 3:28 Tatro said: this is not a Harley part... it must be home made... this Tatro is Sharp as a as they come...
I dipped my tongue into a thimble of whiskey everytime the guy filming touched something more than once.....when he didn't need to.....and I'm drunk AF a third way through the video.
Must be doing some good blow....or the worst case of OCD I have seen......
Ricks the man
YEAAA FOR RICK!!! HE IS MY FAVORITE TATO EMPLOYEE . HE IS HUMBLE AND FAIRLY COMPETENT/KNOLEDGABLE. A REEL ASSET TO THE TATO MACHINE FAMILY! TELL RICK IM COMING FOR HIS JOB!!! HAHAHA I'VE BEEN WATCHIN FOR A FEW MONTHS, AND HAVE DECIDED TO DO A 1000 MILER TO COME SEE YOU GUYS AND PROB GET SOME PARTS. SOMETIME THIS SPRING. YOU GUYS KEEP UP THE GOOD WORK!! SEE YA SOON GUYS !! SAXXX ( CHAD J BAGLEY)
TATRO SORRY MAN DON'T KNOW HOW THAT GOT PASSED ME. IM NOT THE GREATEST SPELLER. HA HA AS YOU CAN SEE. BUY THE WAY MAN THANKS FOR TAKING THE TIME TO DO THESE VIDS A LOT OF WORK FOR A GUY THAT PROBABLY WORKS WAY MORE THAN HE RIDES!! WHEN I GET OUT THERE WERE GOIN FOR A RIDE ,, I'LL BRING MY CAM SO THE FANS CAN GET A GLIMPS OF YA'LL RIDIN WITH SMILES ON YOUR MUGS!! HAHA---HA
You don't have to shout Chad!!
Books = knowledge. Experience = common sense.
that about covers it.
tatro
I never use China, Tiewarn
what gear set did you install here? have you had any experience with the andrews or the rev techs?
yes, they all work about the same. every now and than you get a bad gear that you have to deal with.
tatro
Not sure what bike I want to get yet, but, can you put a newer 6 speed tranny on a older FXR (80'ish) EVO motor?
Rick is hilarious!!!
If you were left to work by yourself you'd have no fingers left.
Question if you pull the lip out the case removing the main shaft gear out the bearing on this same trans it the case junk or can it be reused? Does the lip have to be welded back in or will it work with out it?
Thanks for any assistance giving.
it is just without the bearing shoulder. something has the keep the bearing in place.
tatro
thank GOD that MR. Tatro is watching this man work on anything... this is scary video to watch...
Too bad y'all are not in Florida, I'd like to hang around with you old fuckers and learn some old school Harley.
👍👍👍👍
can you feel the love ! hard to find ...
wrong channel, those are the channels you pay for.
tatro
LOL teasing Rick all the way
? Will there be a FOLLOW-UP ?
Did it "run" / operate ? Did it LEAK ?
Did the RevTech / CCI 6-Speed Clutch Cover end up working ( or NOT) ?
I'm subscribed & NOTICES are "on" !!!
Be sure to let us know how this BUILT turned out on the BIKE !
COOP
..............................................
just relax bro, ignore the camera... lol It's hard to ignore the camera operator---LOL It's nice to have him around though, isn't it?? I love all the videos and someday I hope to drop in and say hello to all and maybe spend some government ssi money.....
I guess I missed it, what about the pawl adjustment ? I can't find neutral and tried everything else, so maybe a pawl adjustment is in order.
never mind, went back and watched again.
lost another job.
tatro
Ricks' work rag looks suspiciously similar to the shirt he's wearing...
it is.
tatro
I gotta question for ya if you dont mind I got a 90 tourglide I beat the absolute shit out of this poor thing somehow could even think why but my dipstick to my trans said fuck you and broke off into my trans any reason u could think this would happen ? It's only aluminum so it didnt lock up or nothing never even realized it until I went to service my bike and well yea she still gets right along little round if the trans of course I just put all new seals in primary side of the trans because I was already bc I broke the belt lmao but that helped a whole lot I had mostly all the seals blown never really sealed but never really leaked mainly just seeping but it's a old evo probably never had any seals replaced in it got all sorts of performance shit s&s, dyna 2000i igniting havnt broke into the motor yet almost positive it's got a ev27 cam its s bagger cam she will get up and go thatscor damn sure shes a beast she will run eirh the big dogs just fine
I like tootsie pops too
Where's the hospital scrubs and latex gloves? Doesn't Cal. require them for motorcycle transmission assembly?
is this a trick question. in the hospital.
tatro
The Comedy Hour...
Do you have any of these transmissions for sale?
Sears doesn't sell new fingers.
they are on sale at walmart this week.
tatro
Is that Milk ?? LMFOA
Yea tatro come down lol sound like family
rick wtf man
28 minutes in and its painful to watch. Rick is like, "DUDE, I know what I'm doing!" While Tatro is just trying to get Rick to finesse this build... lol, who would you want to help you through this or any rebuild? Attention to detail gets my vote.
the finer points of the learning experience.
tatro
I wouldn't let Rick touch my bike with that skill with the hammer!!!
Kinda looks like someone doing watch repair with a sledge hammer....
If that man can do it, anyone can 🤣🤣🤣
you just have to have the need and want to get things done.
tatro
@@TatroMachine yea I know man, I'm not throwing shade at the guy. I will never think negatively about someone who tries. Good content
Tatro Machine that’s what I’m doing with mine, will I be able to get it back together? Idk but I’ll just keep chipping at it. Getting the clutch hub off my 89 was a nightmare.
Ricks a nice guy but he’s painful to watch and is that rag on the bench part of ricks shirt that got caught in the gearbox
only if it has red stains on it.
tatro
give the man a break
Muy desprolijos para trabajar. Que mal.
ROTFLMSAO!
Funny shat
I got through about 3 minutes of that before I wanted to smash everyone in the face! FAIL!
someone needs anger management classes.
tatro
Thats a fact....or someone needs to make.an informative video without the bickering snatching and grabbing and throwing parts maybe? Either way its a bad situation! Merry Christmas 🎅!
,With all the nice equipment and tools you have in your shop I am surprised that you don,t have and use the proper bearing tools for rebuilding Harley transmissions. Any good mechanic knows that you press or support against the inner race so you don,t stress or distort the bearing. How long do you really think those bearings are going to last? (Not long) Especially those trap door bearings after beating them back and fourth with a hammer. They are junk now.. I see the vid is over three years old. Just curious how long it was before it was back in your shop. Do charge them second time to fix your fuck? Do you charge them for all that fumbling time in the vid? If so shame on you..
I
h
you read to many books. the bearings last just fine if you don't use that china junk.
tatro
How many subscribers did you lose with that Hillary comment? Good riddance to them.
none, i don't do cat videos. there are crooks on both sides of that fence.
tatro
Tatro Machine 👍👍👍👍
Rick is a spacial needs stooge. I would have loved seeing Rick lose his fingers on this build. We call people like Rick"Joes" .
maybe you should keep your comments to yourself and not pick on your elders that are not quite all there anymore. he was payng his dues way before your were born.
tatro
Rick is working on his own bike not paying some one an learning from a old school guy that not many of them left i woud love to meet a guy like tatro thats willing to share what he knows about H-D
WOW I WONDER What HE thinks about blacks
who cares, get over it.
tatro
Okay, i appreciate most shops that provide video's, here's the problem, i have checked a few of yours, the camera is always on the dog, the mechanics arm or the footrest when it should be on the job. way too much fast swinging around. leaves lots to the imagination, very little concentration on actually showing how the jobs are done and more on chasing around lie you'd rather not be doing the video but just doing it because you've got nothing else to do and you're gonna be glad when it's over. Sorry, got to find one of the others that puts the viewers interest ahead of their own. thx anyway.
you sure complain alot for getting this for free. the customer is paying the bill, not you. the customer is first and the videos are what you get. if you want to pay for the job and the production company to do the videos that you will get what you want.
tatro
🤣🤣🖕 Idiot complains because this is how a real down home shop works. It doesn't have production value and some bullshit edm bargain value music playing in the background. BYE GUY!
I knew that would get his juices flowin with THAT comment!