I cant thank you enough. The previous owner left no information and its taken weeks to get someone out here to assist with the connection. Very grateful for you video.
This is a great video. It would be even better if you could do a new one or add to this one how to fix it when flipping the toggle doesn't reset the connection. My unit still showed connected to the web - all three lights showed working properly (3.0). Fluidra walked me through doing a full reset of the system (button in the upper right corner of the board) which finally fixed it.
Thank you for the video. I followed it to try to help my mom with her pool. I think I have to wait until all the equipment is turned off in the pool. I reset the button and followed your directions. Thank you and I hope it works. The middle light is just yellow for now. and the other two are not on at all. Assume they should be green. SHe bought the home from people and they didn't leave any directions. Thanks again... KSL
Please talk about WPS connection. No one has a video for this type of connection. I have followed the manual instructions. Yet, I cannot connect or reach any tech help. Thank you.
We just moved into our new home. The previous owner has the iaqualink setup already, I believed it was a Ethernet wired setup. If I performed this wifi setup, will it lose it previous settings? Since i know very little about the pool, i am scared i would lose the previous settings.
How can I send an invite link for someone else to use the controls in the app If I enter the device number on a new account does it take the controls away from the other existing users?
My aqualink is disconnected because i put a wifi extension, since then i can connect it, i followed these steps but its not let me in the page as the first connection
I've followed these steps and my Aqualink 2.0 is connected as my green light is solid. After I add the Device Number, nothing happens and it says "Location not found". What am I doing wrong? You make it look easy, but it won't recognize the Aqualink 2.0. I did notice that in my app, Aqualink 2.0 is not even a choice, it reads "AquaLink RS, PDA, Z4/TRi" only. Any help would be appreciated.
It sounds like the I-AquaLink Antenna is not conected. Are all 3 lights solid on the I-AquaLink Antenna? They all need to be solid to be connected. It can only connect to a 2.4G WiFi. IT can not connect with a 5G. Certain WiFi systems do not let you select between 2.4G & 5G. These WiFi systems will NOT work. You also need to have 3 bars of signal at the I-Aqualink Antenna for a good connection.
I cant thank you enough. The previous owner left no information and its taken weeks to get someone out here to assist with the connection. Very grateful for you video.
so glad it was helpful!
This is the best pool maintenance channel
Thank you!
Thank you Craig... I have saved to pass out to my clients for ease of setting up in the future.
Thank you very much! I needed to reset due to Wi-Fi change, and this was just what I needed. Clear and concise.
Very helpful, got me connected and configured in a matter of minutes vs. the 30 minutes I have been tinkering with it. Thank you!
This is a great video. It would be even better if you could do a new one or add to this one how to fix it when flipping the toggle doesn't reset the connection. My unit still showed connected to the web - all three lights showed working properly (3.0). Fluidra walked me through doing a full reset of the system (button in the upper right corner of the board) which finally fixed it.
Thanks. This was EXACTLY what I needed, and well explained.
Thank y so much for this video. Can you please help me set a timer in Auto mode ? My pump wouldn’t turn off
Ok I did all the steps but get stuck at 2:43... the iQAquaLink network doesn't come up in my list. What can I do to troubleshoot this? Thank you!
thank you craig this was very helpful to set up my mothers pool !!
Thank you for the video. I followed it to try to help my mom with her pool. I think I have to wait until all the equipment is turned off in the pool. I reset the button and followed your directions. Thank you and I hope it works. The middle light is just yellow for now. and the other two are not on at all. Assume they should be green. SHe bought the home from people and they didn't leave any directions. Thanks again... KSL
Thank you for the assist! I accidentally deleted the link and with your help I was able to regain access.
Glad it helped!
Perfect!!!!! I was able to set up in 5 minutes. I changed my wifi password and had to reset internet access. Thanks!
Glad it helped
Thank you. I followed the instructions and unable to connect WiFi. But I need the pool to start running. Is there a way to override the aqualink?
Please talk about WPS connection. No one has a video for this type of connection. I have followed the manual instructions. Yet, I cannot connect or reach any tech help. Thank you.
How do you do what model you have?????
We just moved into our new home. The previous owner has the iaqualink setup already, I believed it was a Ethernet wired setup. If I performed this wifi setup, will it lose it previous settings?
Since i know very little about the pool, i am scared i would lose the previous settings.
Extremely helpful
Thank you
Exactly what I have been trying to do for 6 m!
Thanks for video! Once i connect to the aqualink wifi, no login page showed up. Any ideas? TIA
Thanks for having the most simplified tutorial online. The manual made me want to headbutt the pool equipment to pieces.
Glad it helped!
@@craigwooster6646
Cheers.
Thank you very much. That was helpful
I also have the IQ20 but in the app is not that option anymore, any update?
Thank you!!! Worked like a charm
super simple and effective
Is this process the same on an Android Samsung phone?
3:47 device number needs to be in CAP and include dash?
I too have this question. Are the dashes in the device number needed?
Yes, all caps and include the dash.
Very helpful, thanks.
How can I send an invite link for someone else to use the controls in the app
If I enter the device number on a new account does it take the controls away from the other existing users?
Our iaqualink was previoulsy wired with an ethernet cable. Can I remove that port and connect with my wifi? Thx.
Excellent demo. Thanks.
Glad you liked it!
Looking to upgrade to this 2.0. Jandy said i jave to replace pda chip with rs chip for advanced settings like programing. Have you done this?
What do I do if the green light on the right-side of the pool nickname is red ?
Great video! Thank you!
Glad you liked it!
Very good explanation!!!! Thank you
Glad you liked it
Fantastic help!
My aqualink is disconnected because i put a wifi extension, since then i can connect it, i followed these steps but its not let me in the page as the first connection
The app is not logging in it says network server error action required
Thank you so much!
I've followed these steps and my Aqualink 2.0 is connected as my green light is solid. After I add the Device Number, nothing happens and it says "Location not found". What am I doing wrong? You make it look easy, but it won't recognize the Aqualink 2.0. I did notice that in my app, Aqualink 2.0 is not even a choice, it reads "AquaLink RS, PDA, Z4/TRi" only. Any help would be appreciated.
It sounds like the I-AquaLink Antenna is not conected. Are all 3 lights solid on the I-AquaLink Antenna? They all need to be solid to be connected. It can only connect to a 2.4G WiFi. IT can not connect with a 5G. Certain WiFi systems do not let you select between 2.4G & 5G. These WiFi systems will NOT work. You also need to have 3 bars of signal at the I-Aqualink Antenna for a good connection.
Thank you
952 Gutkowski Streets
789 Stehr Lock
50382 Retta Port
Erdman Ranch
Williams Linda Martin Joseph Rodriguez Brian
494 Hollie Greens
Robinson Deborah Harris George Brown Shirley
Johnson Jessica Young Brenda White Jose
Thompson Jason Walker George Lopez Jason
22438 Hirthe Spring
Thank you so much!!!