How to Level the Print Bed on the Longer LK5 Pro 3D Printer | Simple Tutorial
HTML-код
- Опубликовано: 24 авг 2024
- In this video I’m going to walk you through how to clean and level the print bed on the Longer LK5 Pro 3D printer. It’s an easy process that just takes a little bit of practice.
If you'd like to see more 3D content - please drop a message below and let me know what you'd like to see next!
Check out my unboxing and assembly of the LK5 Pro here: • I Got a 3D Printer | L...
![Tee Grizzley - Detroit (Feat. 42 Dugg) [Official Video]](http://i.ytimg.com/vi/aeKfTtt0x14/mqdefault.jpg)
I find that in addition to wiping off the nozzle it helps to 'unload' the filament a bit (not completely) so that if you're using a filament type that has a tendency to 'ooze' there won't be any filament in the hotend for it to melt and let ooze out after you wipe the nozzle off.
Great tip!
Thank you so much for making these videos! I'm a new Longer LK5 Pro owner and recently was running into problems with my nozzle, your video on replacing the nozzle and skirt was incredibly helpful as I've never replaced those components before, and this one looks to be just as informative! You've definitely earned a sub from me, and I look forward to seeing more of your content!
Thanks for the sub and kind words, Zach. I'm glad you've found the videos helpful!
How to do you adjust the middle on (#5) there’s no wheel to adjust it
There isn't a lot of options for moving the center, but if the nozzle is a little further away from the center, you could add a piece of paper or 2 between the metal plate and the print bed that would raise that center spot up just a bit.
How about adding a bl touch to the longer lk5 pro? Looks like there are some cheap kits on ebay but it's a bit scary modding a 3d printer without a guide
Thank you Sir!
You're welcome!
very helpful thk!
I'm glad you found it helpful!
Good video thanks. I have an issue with my Longer LK5 pro. The printer is brand new so I didn't have to clean it. I went through the bed leveling in your video but when I go into Cura and start a print the printing starts, and then the print stops and it takes me back to the home screen on the printer LCD.
I notice the print start and instead of starting to print in the center it will go to the extreme bottom left corner, start and then the print job just stops and the LCD goes back to the home screen.
I clicked on MOVE and I clicked the little HOME button on the blue arrows and it asked if I wanted to reset the X origin I think it was and I said yes. I also clicked the "enable" green button. Please help I'm going nuts. :(
Hello! Have you tried reinstalling and/or updating the firmware? That would be the next thing that I would try. I think you can get the most recent firmware from this blog post on Longer's website: www.longer3d.com/blogs/operation-tutorial/longer-lk4-pro-lk5-pro-3d-printer-firmware-update
Hopefully this helps!
hey! mine is starting in the middle of the air but i’ve leveled it correctly, i don’t know how to check in cura if it’s starting at the right height or not, but i need help:(
Hey Jonathan! I haven't had that problem before, but I believe the problem is that your z-height in the gcode is incorrect. If you didn't change it on purpose, I'd recommend uninstalling and reinstalling Cura. If that doesn't fix it, I'd try updating the firmware on your printer. If neither of those things work, you will need to adjust the z offset in Cura. I believe you have to download the "Z Offset Setting" plugin from the marketplace to adjust the offset.
My printer is pushing all the way down on the bed, and i dont know what im doing wrong here
Check the position of the z-axis limiter switch (the little button that the print head compresses when I comes down). If that isn't positioned correctly, it might not think the print head is as far down as it should be. If that is fine, then you might have an issue with your z offset
@@jfmedina2010 this was my issue, thank you!
Hey John... Do you have an affiliate link for this 3D Printer ?
I'd like to reward you (if I do decide to buy one of these 3D printers) for being nice enough to answer my questions about it.
Thanks again !
I appreciate that! I just applied for one directly through Longer. I'll add it here as soon as I get approved!
@@jfmedina2010 No Problem... like I said you deserve it !
@Snailmailtrucker here is my link! shareasale.com/u.cfm?d=1057541&m=115522&u=3747701&afftrack=
Also, once you click the link use coupon code LK5PRO$20 and you'll get $20 off your order!
Is it true that this 3D printer doesn't print Carbon Fiber Filament ?
I have never tried Carbon Fiber filament so don't take my answer as gospel. But, Carbon Fiber filament is still PLA filament. Based on what I saw when I looked up print settings the LK5 Pro can print at the temperature range recommended for CF filament. It does say it is more ridged than regular PLA, but I don't think that would make a huge difference.
@@jfmedina2010
Thanks a bunch ! I appreciate your fast reply !
Liked/Subscribed
@@Snailmailtrucker I appreciate it! 🙏
My middle of the bed sinks down
I'm not sure there is any specific product that would fix this, but you could probably put a business card in-between the print bed and the metal plate.
position 4 is too tight but wheel is tightened as much as possible useless info in my case
I'm not sure if replacing the springs would solve your problem or not, but it might be worth a try. I show in this video: ruclips.net/video/oNo6pL3DA7E/видео.html how to remove the bed. I don't replace the springs in this video, but removing the bed will give you access to them. The replacements are not super expensive on Amazon (amzn.to/3NX03eL) perhaps that will solve your problem.
Need to move limit switch down some and level it again