Power induYour channel is amazing. Your ability to build things is admirable. This project is both beautiful and impressive. Please continue to post.👍 Your channel is amazing. Your ability to build things is admirable. This project is both beautiful and impressive. Please continue to post.👍
Hello. You can make an injector tester from any hydraulic jack. I no longer know the dimensions at which I machined the cylinder on the lathe. You have to drill the piston at the base and make a cover in the upper part of the cylinder. On that cover you have to mount a pressure gauge and a pipe that goes to the injector.
This pressure gauge is from the beer dispensers. I think higher pressures are needed to work. The device for checking injectors works, only the pressure gauge needs to be replaced.
I wanted to see if an injector tester can be made from a hydraulic jack. This pressure gauge is for beer dispensers and I think much higher pressures are needed to work. It's a functional project, only it needs another pressure gauge..
Obviously they’re not blessed with a brain.. they’re probably one of those people who weld in flip flops and a piece of cardboard with window tint taped to it.. then wonders how they got burned and cant see afterwards..
Great build. I'll be making one myself, bot sure what gauge to yse either.. 400bar seemed smart but apparently not, or you had a bad injector or low pressure petrol one 🤔 mine will be primarly for diesel so id expect 250bar i believe 🤔 hmm.. thanks for this 👏🏼👍🏻👍🏻
Hello. The pressure gauge is good. The problem was with the tap, diesel fuel went from the jack to the injector or from the injector to the pressure gauge. I canceled the tap function and now it works fine.
DiY Fuel injector tester - is working ruclips.net/video/BK2dEXgEPuk/видео.html
Es una muy buena herramienta muchas felicidades y gracias por compartir con nosotros tu hingenio
Power induYour channel is amazing. Your ability to build things is admirable. This project is both beautiful and impressive. Please continue to post.👍
Your channel is amazing. Your ability to build things is admirable. This project is both beautiful and impressive. Please continue to post.👍
Thank you. Your comment gives me confidence and I will try to build interesting and useful things.
Ficou ótimo. So não entendi porque o manômetro ficou parado. Qual a finalidade dele ali.
Класс!!
Отличная идея!
Let me ask you something, master, what do you put in the hydraulic pump, is it pure diesel or do you mix it with oil?
Pure diesel.
But I'm interested in this, can a pressure gauge of 400 bar, and a hydraulic diesel of 2-3 tons, if you understand me
@@aleksandarscekic5402 Yes. You can use a 2T hydraulic jack and a 400 bar pressure gauge.
So, can the hydraulic pressure gauge with glycerin from 0-400 bar, on a 2-ton diesel engine?
and master, what is the problem that the manometer cannot show the pressure
Ottimo, un capolavoro
How do you fill deaselhow do you fill the diesel?
You replace the hydraulic oil with diesel .
Yes
where you bought pressure meter gauge with fuel connector? answer now plis, urgent
From local market.
@@DorelBorleainjector de u650 😂
@@Ovidiu668 ce?
Hello, would it be possible to have the measurements of the cylinder you machined, I have the same jack, with all my gratitude. FRANCE.
Hello. You can make an injector tester from any hydraulic jack. I no longer know the dimensions at which I machined the cylinder on the lathe. You have to drill the piston at the base and make a cover in the upper part of the cylinder. On that cover you have to mount a pressure gauge and a pipe that goes to the injector.
how can one know opening psi of any injector
Workshop manual for that engine
Hi, whats the purpouse of the valve on the right side?
Hi. No valve is needed for this device to work. It has no purpouse.
Lets see, an inoperative gauge so you don't know what pressure the injector is popping off at so in essence it is useless.
This pressure gauge is from the beer dispensers. I think higher pressures are needed to work. The device for checking injectors works, only the pressure gauge needs to be replaced.
the valve needs to be mounted after the valve.
ruclips.net/video/BK2dEXgEPuk/видео.html
Presion maxima nesecito uno 600 bares camorail
Depende del modelo de inyector. Este inyector debe abrirse a 173 bares. En este video no funcionaba el reloj indicador, pero resolví el problema.
Just destroying the tools 😂😂😂
Gde sipate gorivo
20 ton jack is kinda overkill and totalky unnecessary. The cheapest 8 ton harbor freight jack will achieve the same results.
@@MrBullfrog92 True. This 20 ton jack was defective and because of that I decided to turn it into an injector tester.
@DorelBorlea I totally get that! Whats the best alloy? Freealloy!
Don't see the gauge working....😮
I wanted to see if an injector tester can be made from a hydraulic jack. This pressure gauge is for beer dispensers and I think much higher pressures are needed to work. It's a functional project, only it needs another pressure gauge..
Mantep tanya harga sampe brpa
Ok gud wrk
It's fake, how do u fill the diesel?
Are u need to disasemblly the pump for fill the diesel 😂😂😂
The project is not completed. I wanted to see if an injector tester could be built from a hydraulic jack. A fuel tank is very easy to add.
You would just fill the oil filler with diesel. not tough to figure out.
Obviously they’re not blessed with a brain.. they’re probably one of those people who weld in flip flops and a piece of cardboard with window tint taped to it.. then wonders how they got burned and cant see afterwards..
top
Great build. I'll be making one myself, bot sure what gauge to yse either.. 400bar seemed smart but apparently not, or you had a bad injector or low pressure petrol one 🤔 mine will be primarly for diesel so id expect 250bar i believe 🤔 hmm.. thanks for this 👏🏼👍🏻👍🏻
Hello. The pressure gauge is good. The problem was with the tap, diesel fuel went from the jack to the injector or from the injector to the pressure gauge. I canceled the tap function and now it works fine.