How to burnish and weather metal tank tracks VMS Black Track Pro 2 Extra tutorial
HTML-код
- Опубликовано: 25 фев 2021
- Metal tracks require special treatment and it's easy to ruin them with poor "burnishing" fluids or home-made concoctions. With VMS Black Track Pro, a proven blackening system you are guaranteed that your tracks will to look amazing!
USE: 1. Put on protective gloves and eye protection. Pour blackening fluid into a receptacle. 2. Using tweezers submerge compatible tracks in the fluid for 5-10 min. Disperse any air pockets using a brush! Flip the tracks and again disperse any air pockets, allow another 5-10 min. Once the tracks are blackened to your satisfaction take them out, rinse with running water and dry using a paper towel and hair dryer. 3. Burnish the tracks using a shortened stiff flat hog brush (scrubber brush) or a soft metal brush to achieve the likeness of steel. Tested on tracks by Friulmodel and Masterclub. Tracks by other brands may react different - you proceed at your own risk! When in doubt test on a single track to check if compatible.
Full info at: www.vms-supplies.com/vms-blac... 
Хобби
![Natanael Cano x Oscar Maydon - Giza [Official Video]](http://i.ytimg.com/vi/eXCS6-MSQ_Y/mqdefault.jpg)
Excellent video Chris.
All nicely explained .
Keep on the good work there mate and stay safe !
Cheers buddy, much obliged!
I literally stumbled upon your channel .Dear God , you are a revolution !
Thanks a lot, glad you enjoy the channel! Happy modelling, Chris
@@Vmssupplies I was preparing to weather my HO scale Fleischmann turntable ,now I will postpone all until I do the study of your stuff , and then order ,and then exercise ... !
Great video, thank you for sharing!!!!!!!!! 👍👍👍👍👍
Cheers!
Magique merci pour vos vidéos 👍🏽
Merci beaucoup l'ami, content que ça t'ait plu! Chris
Wszystko swietnie pokazane i krok po kroku bez przyspieszania video. Super!!! Kiedy mozna spodziewac sie kolejnych odcinkow?
Serdecznie dziękujemy za komentarz! Jesteśmy bardzo zajęci także nowe video ukażą się już raczej w 2022 roku. :)
I have bought and tried several of your products and they are very good. (Thanks to Night Shift for introducing VMS's products in their video.)
However, I would be happy if there were English subtitles for RUclips that could be translated if possible...
Thank you very much for your support. The subtitles are hard-coded - our mistake but I will certainly think of a solution. Best regards, Chris
Great Videos . Just a tip how about listing all products used in your demo.
Thanks, will have create one in the description!
I just purchased some from Michigan Toy Soldier. Your products are amazing! One question, can you reuse the fluid?
Thanks a lot for your support Jonathan! You can reuse the product as long as it blackens, when it stops bluing you will know it's time for a new portion. Best regards, Chris
Any news on the re-opening? We miss you!
Soon Bob, sometime between 10-16 July. Thanks a lot for your support and kind message! Chris
Great video. Does the liquid have any impact on resin, say for example the resin pins on Masterclub tracks? Thanks.
Thanks Ryan, glad you found it interesting! No the liquid doesn't affect resin in any way. Happy modelling, Chris
I'll be ordering more of your stuff. Is this going to be a bundled type or a stand alone product?
Hello this one is one bottle - improved formula, no need for degreasing and hot water or activator, although you may still use activator if you have some - won't hurt. :)
Very nice! I have a Heng Long M1A2 Abrams R/C tank with metal tracks that I'm going to be doing this procedure on. It's going to an interesting challenge as 1. The full scale Abrams has two large rubber pads per link. I'm thinking that once blackened to be careful not to burnish the section that is supposed to represent the rubber. 2. I've looked over a number of pictures of real Abrams tracks, and they really don't seem to get very rusty. Earth tones on the other hand are pretty abundant. I take it the procedure is going to be the same? Any thoughts or suggestions?
Also, can the burnishing fluid be reused?
If the rubber pads are cast metal integral to the links then best paint them with good enamels such as Revell, Model master, Humbrol, after you are done burnishing. These may still scratch a bit while the tank is rolling but should withstand some punishment. Tracks get rusty only when a tank is not frequently used so you may skip the rust part if you aim for tracks that are in constant use. Best of luck! Chris
INCREDIBLE..... and a large volume of soln!!!
In burnishing products that I have examine.....why should I get yours!???? Serious question, don't mean to knock your product, but I must admit, you do have a larger volume of the solution than "other brands". Is it REALLY that easy??? I have several armor models, but Never made a metal track...let alone a BLACKEN one!!!
Does your link provide metal track products for Various tanks????
Thanks a lot for your comment, the product is easy to use just as you see in the video, add some pigments as we show in the end and you are golden! :) Pro modelers like LPJ models and Night Shift use our solution too. :) Our solution works with Friulmodel tracks and Masterclub tracks - these companies make tracks for most tracked vehicles. Chris
Where to buy in the UK? Tried online, redirected me to ebay but no results
Hi Ben, the ebay store is offline for another 2-3 weeks, try here: www.vms-supplies.com/buy-now Chris
I found this after watching a recent Night Shift video, and a thought occurred to me: could this be used for surface prep for painting metal gaming miniatures, either before applying, or instead of, a primer coat? Paint jobs on metal minis tend to be notoriously fragile, so I'd be curious to hear your thoughts on such an application, or if it would be a bad idea for reasons that may not be obvious to someone unfamiliar with such materials...
Hi Andrew, For priming metal you can try this ruclips.net/video/_U4A92rxxe0/видео.html and after you paint the minis apply 1-3 coats of varnish: ruclips.net/video/J5XdutTX4NA/видео.html Chris
@@Vmssupplies that is impressive, to say the absolute least... Thank you for the quick response, too.
Do we still need to clean the tracks with styrene cement?
Hi, No you don't, we improved that also. :)
Is this stuff safe to put down the drain when cleaning up? Thanks
Yes, disposal is not a problem, just flush with tap water and that's that.
Witam serdecznie. Takie pytanie. Czy Wasz produkt jest "kompatybilny" z Friulmodel? Pytam ponieważ używam AK track burnishing fluid i ostatnio zauważyłem że ma lekką "czkawkę" na Friul pomimo odtłuszczania w occie i płukania w ciepłej wodzie bez żadnych dodatków.
Z góry dziękuję za odpowiedź i pozdrawiam.
Paweł
Tak, na filmie robimy właśnie Friule.
Looks great but cant afford metal tracks.
Oh sorry to hear that Charles, they are costly indeed, hope the financial situation improves for you!!!
How durable is it? Will it hold up to rc tank tracks with a bit of driving? I know it will wear down a little bit but that will be good.
It will hold normally in the recesses and polish up on the edges which will make it look very authentic. Chris
👍👍👍
Thanks buddy!
I wonder how well these would turn out placed inside a ultrasonic cleaner for a short time.
You mean like with the blackening fluid instead of water? If so this could prove to be a faster and more efficient process. Good thinking.
Yeah metal tracks are the way to go. Unless its a special application.
Cheers mate!