VW Passat B8 Analogue to Digital Dashboard Using AVDI and ABRITES RH850/V850 Programmer
HTML-код
- Опубликовано: 24 окт 2023
- Hello, friends!
Today I am going to show you how to do something very cool and practical; exchange an analogue dashboard for a digital one in a Volkswagen Passat B8. The procedure requires you to read the immo data from the original analogue dashboard and transfer it to the digital one. This is done using the ABRITES RH850/V850 Programmer.
First, remove the original analogue dashboard from the car and connect it to the RH850/V850 Programmer, by soldering the CB501 wires to its PCB (after removing a few capacitors). All instructions for this are in the software under the Wiring button once you select the dashboard from the software menu. Follow them closely. Once you read the immo data from the analogue dashboard, SAVE it to a file! It is a crucial step of the process. The data is saved in a .json file containing plain text immo data.
After you read the data, get the digital dashboard and connect it to the RH850/V850 Programmer. Remove the required capacitors and solder the wires in their places, as the software instructs you to. Now you can move on to transferring the immo data from the original dashboard to the new one by loading the .json file. It is a very easy and user-friendly procedure, simply press the LOAD button and choose the .json file. Then, press the Write button, to write the transferred immo data to the new dashboard.
When you have transferred and written the immo data to the new dashboard, get to the car with your AVDI and laptop. Install the new digital dashboard in it. Then you will see that the remote is working, but you cannot start the car with the keys you have. Since the dashboard is replaced, the keys need to be relearned to the vehicle.
The final step is key programming.
At this step, you need to go to the Key Learning menu in the ABRITES Diagnostics for VAG, under Special Functions. Start a Key learning by CS procedure. Open the .json file with the immo data from the original dashboard and copy the CS. Paste it in the software and select the number of keys you want to program. This Passat has two keys, so I want to relearn both of them. Press Learn keys and get the keys close to the antenna (located on the right side of the steering wheel column in this case) one by one, turning ignition on with each of them. And that's all! The digital dashboard is installed and adapted together with both keys working!
Watch the video and let me know how you like it. Like and Subscribe for more! Share it with your friends and colleagues or anyone, who you think it might be helpful to! And most importantly...
Have fun!
AVDI FAN
Hardware:
AVDI - abrites.me/avdi-vw-passat-b8
ABRITES RH850/V850 Programmer - abrites.me/zn085-vw-passat-b8
Software:
AMS - abrites.me/ams-vw-passat-b8
VN021 - abrites.me/vn021-vw-passat-b8 
Авто/Мото
Четко как. Я хочу купить абритес для этих целей.
hello my firend i have just one question for this operation we need just to learn and write immo data im right ? abs or somthing coding ca wirted automaticly ?
Did you fix problem when Avdi clear config from kessy on passat b8?
What about coding and adaptations to get rid of the errors?
indeeded it's not clear !
@@akramnet1 Using Abrites diagnostics for VAG online you can do all the coding and basicc settings, this is how we did it, you can also use other tools.
@@twinturbo1989 For exemple here in the video they didn't show if abs coding is needed or not?
You have this problem coz you not copying FAZIT data from original cluster. All components with CP will have faults now.
Yes, but they do not, have you checked the procedure?
Can you explain more about FAZIT?
What is the fault that will be shown on other module with component protection?
El radio queda sin cp ?
@@fabiolos9 si, no hay ningún problema;)
Какие лицензии нужны ?
Нужна RH850
@@user-tj2fp7yf9i да знаю уже есть